• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.241-244
• /
• 2000

Continuous $H_2$ production from CO and water was studied in a trickle bed reactor(TBR) using Rhodopspedomonas palustris P4. To achieve high cell density, R. palustris P4 were cultivated by a fed-batch culture mode under chemoheterotrophic and aerobic condition, and final cell concentration was 13 g/L. TBR could provide sufficient residence time for CO to contact with cell suspension circulating TBR. The maximum CO uptake rate was found to be 16 mmol/L/hr at gas retention time of 50 min and CO partial pressure of 0.4 atm. In our correlation of the experimental data with mathematical model of TBR, the TBR operation with P4 was found to be lie in an intermediate state between mass transfer limitation and kinetic limitation. Due to the high cell density as well as hydrogen production activity in this study, TBR operation showed a superior performance to other previous reports on microbial hydrogen production.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.53-61
• /
• 2006

Korean Government started to publish Korean CCI(Construction Cost Index) again at February 2004 since CAK(Construction Association of Korea) stopped publishing it 1994. CCI is developed using the verified statistical data, that is, input-output table and producer price index by Korean Bank and labor unit cost by CAK. Though the method is available as it uses the verified statistical data, there is a limitation to reflect the characteristics of construction. For overcoming this limitation, this study suggests CCI development method investigating the input structure of labor and material cost for each type of construction project and applying the cost variations of the items.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.291-308
• /
• 2009

The implied obligation under the contract of affreightment not to carry dangerous goods without prior notice to the carrier applies to the contractual relationship between the charterer and the owner under charterparties. The charterers will be in breach of an implied undertaking under the common law if they load dangerous cargoes without making notice of dangerous nature of them to the owner. It is indicated to be necessary to change the term "shipper" to "charterer", with relation to such implied obligation, where the Hague/Hague-Visby Rules are incorporated into the charter, however, it is not so apparent where an actual shipper is involved. So long as an actual shipper could be identified, the shipper rather than the charterer shall be responsible for damages arising from the dangerous nature of the cargo itself. In this case, the actual shipper is interpreted to have an implied contractual relationship with the carrier just by the act of delivering the cargo to the carrier for loading. If the vessel were damaged by shipment of the dangerous cargo under charterparty, the carrier can claim against such damages based on the contractual obligations under charterparties: "implied and expressed duty not to ship dangerous cargo without notice to the carrier"; "Art.IV.6 of the Hague/Hague-Visby Rules"; "Indemnity Clause" and "Redelivery Clause". The carrier has the conventional right under the Hague/Hague-Visby Rules to land, destroy or render the goods innocuous where the dangerous cargo threatens the means of transport or other interests on board. When the carrier has not consented to make the shipment, the carrier's disposal right could be exercised without limitation. However, where the carrier has consented to make the shipment of the dangerous goods with the knowledge concerned, the right of disposal of such goods should be exercised with limitation.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.222-231
• /
• 2017

In this paper, a new architecture for a cost-effective power conditioning systems (PCS) using a single-sourced asymmetric cascaded H-bridge multilevel inverter (MLI) for photovoltaic (PV) applications is proposed. The asymmetric MLI topology has a reduced number of parts compared to the symmetrical type for the same number of voltage level. However, the modulation index threshold related to the drop in the number of levels of the inverter output is higher than that of the symmetrical MLI. This problem results in a modulation index limitation which is relatively higher than that of the symmetrical MLI. Hence, an extra voltage pre-regulator becomes a necessary component in the PCS under a wide operating bias variation. In addition to pre-stage voltage regulation for the constant MLI dc-links, another auxiliary pre-regulator should provide isolation and voltage balance among the multiple H-bridge cells in the asymmetrical MLI as well as the symmetrical ones. The proposed PCS uses a single-ended DC-DC converter topology with a coupled inductor and charge-pump circuit to satisfy all of the aforementioned requirements. Since the proposed integrated-type voltage pre-regulator circuit uses only a single MOSFET switch and a single magnetic component, the size and cost of the PCS is an optimal trade-off. In addition, the voltage balance between the separate H-bridge cells is automatically maintained by the number of turns in the coupled inductor transformer regardless of the duty cycle, which eliminates the need for an extra voltage regulator for the auxiliary H-bridge in MLIs. The voltage balance is also maintained under the discontinuous conduction mode (DCM). Thus, the PCS is also operational during light load conditions. The proposed architecture can apply the module-integrated converter (MIC) concept to perform distributed MPPT. The proposed architecture is analyzed and verified for a 7-level asymmetric MLI, using simulation results and a hardware implementation.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.97-105
• /
• 2002

Random properties of discontinuities were attributed to the limitation of test methods and lack of obtained data. Therefore, the uncertainties are pervasive and inevitable in rock slope engineering as well as other geotechnical engineering fields. The probabilistic analysis has been proposed to deal properly with the uncertainty. However, previous probabilistic approaches do not take account of the condition of kinematic instability but consider only kinetic instability. In this study, in order to overcome the limitation of the previous studies, the geometric characteristics as well as the shear strength characteristics in discontinuities are taken account into the probabilistic analysis. Then, the new approach to evaluate the probability of failure is suggested. The results of the deterministic analysis which was carried out to compare with the result of the probabilistic analysis, are somewhat different from those of the probabilistic approach. This is because the selected and used data in the deterministic approach do not take account of the random properties of discontinuities.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.176-182
• /
• 1995

The environmental and physiological factors affecting the production of exopolysaccharide (Methylan) and Poly-${\beta}$-hydroxybutyrate(PHB) by Methylobacterium organophilum were investigated. The maximum PHB content was obtained at $38^{\circ}C$ whereas maximum polysaccharide concentration was $3.54g/\ell$ at $30^{\circ}C$. Optimum pH was pH 7-8 for PHB production and pH 6-7 for polysaccharide production, respectively. Under the condition of $Mo^{2+}, Mg^{2+} or Mn^{2+}$ limitation with nitrogenlimitation, the PHB accumulation was increased, whereas the polysaccharide production was decreased as compared with that of solenitrogenlimitation. Under the condition of sole K+ limitation, cell growth was significantly inhibited and no polysaccharide was produced. However, the PHB content was as high as 60% of dry cell weight. Effect of C/N ratios (methanol/ammonium) in the feeding solution was examined for the simultaneous production of polysaccharide and PHB. The higher ratio of C/N showed the lower cell growth, higher content of PHB in cells, and higher yield of polysaccharide.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.413-423
• /
• 2017

In this paper, we propose a ultrasonic and RF-based indoor localization system. In previous work, various systems were proposed for indoor localization, but they have limitation in applicability due to time-synchronization, complexity, or accuracy. To overcome such problems, an indoor localization system with ultrasonic and RF is proposed. A transmitting system is composed of a pair of ultrasonic and RF transmitters and the receiving system is composed of multiple ultrasonic receivers and one RF receiver. The theoretical performance limitation is also analyzed. To verify localization performance, we have implemented a receiving systems and a transmitting system using Arduino modules. Experiments were performed in $2m{\times}2m{\times}2m$ space and the localization errors had a mean of 6.1cm and a standard deviation of 1.6cm.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.109-114
• /
• 2014

After the Fukushima accident in 2011, it was revealed that nuclear power plant has the vulnerability to SBO accident and its extension situation without sufficient cooling of reactor core resulting core meltdown and radioactive material release even after reactor shutdown. Many safety systems had been developed like PAFS, hybrid SIT, and relocation of RPV and IRWST as a part of steps for the Fukushima accident, however, their applications have limitation in the situation that supply of feedwater into reactor is impossible due to high pressure inside reactor pressure vessel. The concept of hybrid heat pipe with control rod is introduced for breaking through the limitation. Hybrid heat pipe with control rod is the passive decay heat removal system in core, which has the abilities of reactor shutdown as control rod as well as decay heat removal as heat pipe. For evaluating the cooling performance hybrid heat pipe, a commercial CFD code, ANSYS-CFX was used. First, for validating CFD results, numerical results and experimental results with same geometry and fluid conditions were compared to a tube type heat pipe resulting in a resonable agreement between them. After that, wall temperature and thermal resistances of 2 design concepts of hybrid heat pipe were analyzed about various heat inputs. For unit length, hybrid heat pipe with a tube type of $B_4C$ pellet has a decreasing tendency of thermal resistance, on the other hand, hybrid heat pipe with an annular type $B_4C$ pellet has an increasing tendency as heat input increases.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.119-169
• /
• 1993

In this article the present writers have surveyed recent cases on Warsaw Convention especially on the cases emerged in the years between 1986 to 1993. The cases before 1986 were discussed already in the book titled "Liability of International Air Carrier," written by Professor Choi, published in Seoul 1986. In this article the writers have reviewed most of the American cases and some cases from the courts of Germany, France and England. Main subjects which were discussed herein were as follows: Liability of air carriers in Warsaw Convention carriage 1. Exclusivity of the Warsaw Convention as a remedy 2. Warsaw Jurisdiction 3. The scope of the Warsaw Convention's definition of "Accident" under Article 17 of the Warsaw Convention (1) Mental anguish (2) Unusual or unexpected events 4. Adequacy of notice of the limitation of liability to passengers for injuries and death 5. Damages recoverable, punitive damages and burden of proof 6. The wilful misconduct exception; definition of wilful misconduct 7. Cargo and passenger baggage 8. Time limitation of actions After examining articles published world-wide, this article compiles and analyses recent cases involving the Warsaw Convention system. As Warsaw System is based on international convention, maintaining uniformity in interpretation is of utmost importance. Therefore, this type of study is essential for resolving air-transportation disputes in Korea. This article examines the current state and recommends the desired course for the Warsaw Convention. The writers hope that this article is helpful to the Korean courts and those in the air-transportation industry in interpreting the Warsaw Convention.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.473-485
• /
• 2015

Objective: This study provides strategies of how to effectively convert an invention, created at universities or government-funded research institutes, into a strong patent with the clear understanding of its unique technological characteristics. Background: Regardless of the amount of research funds available in our country and the decent number of intellectual property rights created using the funds, there was a deficit of more than KRW 6 trillion in the technology trade balance related with intellectual property rights in the year of 2014. One of the reasons was that the vast number of patents that were being produced by universities or by government-funded research institutes were merely performance-based patents, namely, so called "patents for patents". Another reason is that developed technology from research and development could not be transformed into a strong patent right properly due to the lack of related knowledge. Method: After reviewing various references mentioned on the patent strategies, the definition of a strong patent and the strategies of producing a strong patent for an invention drawn out from research performance will be supplied. Results: To produce a strong patent right at universities or government funded research institutes, one should use strategies for strong specifications, strategies of product patents and method patents, strategies of patent portfolios, strategies of know-how, strategies of inventions defined by numerical limitation and strategies of parameter inventions for a more strategic approach. Conclusion: Strong patent rights will be produced with the use of effective patent strategies provided in this study. Application: It is estimated that the results of this study will aid the establishment of strong patents for inventions developed by research performance at universities or government-funded research institutions.