• KSBB Journal
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2002

The decomposition of hydrogen peroxide was used for supplementing the oxygen during batch xanthan fermentations in a bubble column bioreactor in order to escape the oxygen transfer limitation that occurred at the high viscosity of culture broths. The xanthan production, however, was inhibited reversibly by dosing hydrogen peroxide. On the other hand, fluidized particles of glass beads with 8 mm diameter led to high gas-liquid oxygen transfer rates in three-phase fluidized beds, which resulted in higher space-time yields of the xanthan production compared to in the bubble column bioreactors.

• Korean System Dynamics Review
• /
• v.10 no.1
• /
• pp.33-60
• /
• 2009

This study explores the limitation in making a causal model through an existing case and proposes an alternative plan to improve a theoretical system of causation modeling. To make a dynamic and actual model, several principles are needed such as reality based analysis of system structures and dynamics, consistent expression of causations, conversion of numerical formulas to causal relations, classification and arrangement of variables by size of concept, etc. However, it is hard to find cases to apply these considerations from existing models in System Dynamics. Therefore, this study verifies errors of derived models from literatures and proposes principles and guides that should be considered to make a sound dynamic model on a causal map. It contributes to making an opportunity for exciting public opinion to improve theory about causal maps, yet it has limitation that the study does not advance forward to the experimental step. For future study, it plans to make up by classifying and leveling causal variables, developing a dynamic BSC model.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.104-111
• /
• 2003

Micro force measurement is required more frequently for a precision manufacturing and investment in fields of precision industries such as semiconductor, chemistry and biology, and so forth. Null balance method has been introduced as an alternative of a loadcell. Loadcells have advantages in aspects of low cost and easy manufacturing, but have also the limitation in resolution and sensitivity to environment variations. In this paper, null balance method is explained and the dominant parameters related to system performances are mentioned. Null position sensor, electromagnetic system and controller are investigated. Also, the characteristic experiment is carried out in order to estimate the resolution and the measurement range. In order to overcome the limitation by the drift of position sensor and the performance of controller, double electromagnetic force compensation method is proposed and experimented. After controlling and filtering, the resolution under $\pm$ 1mg and measurement range over 300g could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.112-117
• /
• 2003

This paper deals with the problem of synthesis of the 3-dimensional Grasp Planning. In previous studies the genetic algorithm has been used to find optimal grasping points, but it had a limitation such as the determination time of grasping points was so long. To overcome this limitation we proposed a new algorithm which employs the Neural Network. In the Neural network we chose input parameters based on the shape of the object and output parameters resulted from optimization with the GA method. In this study the GRNN method is employed, it has been trained by the result value of optimization method and it has been tested by known object. The algorithm is verified by computer simulation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2013

As GNSS(Global Navigation Satellite System) is used in various filed, many countries establish GNSS system independently. But GNSS system has the limitation of accuracy and stability in stand-alone mode, because this system has error elements which are ionospheric delay, tropospheric delay, orbit ephemeris error, satellite clock error, and etc. For overcome of accuracy limitation, the DGPS(Differential GPS) and RTK(Real-Time Kinematic) systems are proposed. These systems perform relative positioning using the reference and user receivers. ETRI(Electronics and Telecommunications Research Institute) is developing precision navigation system in point of extension of GNSS usage. The precision navigation system is for providing the precision navigation solution to common users. If this technology is developed, GNSS system can be used in the fields which require precision positioning and control. In this paper, we introduce the precision navigation system and perform design and algorithm verification.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.103-109
• /
• 2012

Adaptive cruise control Stop&Go system has been developed to reduce the driver's workload on highway or public road. This system is characterized by a moderate control of engine and brake actuator. A control system capable of modeling driver's driving characteristics has been constructed to provide natural vehicle behavior in full speed driving. But, ACC Stop&Go system has some limitations. One of the limitations is a detection limitation on near cut-in situation. This paper presents development of the near cut-in test procedure, finding of the limitation value on near cut-in scenario and performance comparisons on ACC Stop&Go system.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.1
• /
• pp.42-54
• /
• 2001

The combination of a silicone surfaced plate and high viscosity ink produced a waterless printing system that worked well, but had limitation. The limitation was that this system was restricted to relatively short run lengths. In the waterless printing process, the press tended to heat up rapidly. Heat in turn, broke down the resins in the inks, causing them to become more fluid. When the ink is heated, the viscosity will drop, the ink will become too liquid and the plate will no longer be able to resist it. The ink will adhere to the non-print portions of the plate, and will print as a very fine mist or speckle pattern in the non-image area. On the other hand, when the ink gets too cold, viscosity will increase until ink transfer is impeded. This study carried otu to investigate the effect of temperature variations of the inks on the print quality in waterless lithography and to examine the adaptability of waterless lithography to conventional offset press without cooling system.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2004.12a
• /
• pp.127-131
• /
• 2004

The toxicity of 54 selected process effluents of 16 industry classifications in Korea was evaluated by bioassay test using fish Oryzias latipes, invertebrate Daphnia magna, algae Selenastrum capricornutum and bacteria Vibrio fischeri. Our results demonstrate that the toxicity assessment, such as bioassay test, is effective and of practical use for industrial wastewater management in 54 selected effluents with the limitation of the physico-chemical permit. Among 54 effluents, 4 sample failed physico-chemical permit limitation and 50 passed it. The physcio-chemical measurement items and permit concentrations on the present Water Quality Conservation Act are low related a ecotoxicity.

• Journal of Families and Better Life
• /
• v.14 no.1
• /
• pp.131-146
• /
• 1996

The purpose of this study was to review the previous studies that have dealt with and used Family Adaptibility and Cohesion Evaluation Scales(FACES) considered as an effective instrument for measuring family functioning in order to clarify the theoretical meaning the practical applicability the limitation and the problems of this instrument. FACES has considerably contributed in measuring family dynamics in research and clinical fields and been paid attention to by researchers and clinicians since 1979 However the instrument has been also pointed out its limitation due to the conceptual and methodological problems. This study reviews these problems and then presents some implications to help to improve these problems and to explore the application of this instrument as a measure of family functioning.

• 기술발표회
• /
• s.2006
• /
• pp.54-65
• /
• 2006

Since timbering of a cut in association with underground excavtion work is introduced to domestic, in spite of limitation of special quality in this method, time change, variety of construction, Strut Method is still considered with general methods. Experts have developed methods which is improved in limitation of special quality by continuous studies of normal strut method in basic, and it has been applied to construction site Consequently, this study introduced improved Strut Method to help experts when they select resonable methods with regard to construction site, conditions