• Structural Engineering and Mechanics
• /
• 제25권2호
• /
• pp.219-237
• /
• 2007

The effect of cable loosening on the nonlinear parametric vibrations of inclined cables is discussed in this paper. In order to overcome the small-sag limitation in calculating loosening for inclined cables, it is necessary to first derive equations of motion for an inclined cable. Using these equations and the finite difference method, the effect of cable loosening on the nonlinear parametric response of inclined cables under periodic support excitation is evaluated. A new technique that takes into account flexural rigidity and damping is proposed as a solution to solve the problem of divergence. The regions of inclined cables that undergo compression are also indicated.

• 대한물리치료과학회지
• /
• 제9권3호
• /
• pp.89-96
• /
• 2002

The purpose of this case study was to evaluate the taping therapy program designed to improve shoulder joint subluxation in hemiplegic patients. This study was 9 males who had hemiparesis with limitation of range of motion (ROM) and subluxation on affected side. Patients received proprioreptive facilitation using shoulder weight shifting and additional A type and B type taping. As a result of this study, Patients showed reduction of the subluxation on hemiplegic shoulder joint. but it was difficult to generalize. We concluded that proprioceptive facilitation using shoulder weight shifting and taping therapy was effective in reducing severe shoulder subluxation. Following studies must be evaluated its statistical significance.

• 대한물리치료과학회지
• /
• 제4권2호
• /
• pp.373-382
• /
• 1997

This study has been aimed at figuring out the fact that four kinds of body type grouped according to the tilting of scapular of upper extremity and ilium of low extremity showed the mobility increase for joint parts and the limitation. When we make a thrapy plan which should be comprehensive and general in preventative management and therapy. For the sake of patients who have spinal disabilities including low back pains, it is required for many joints distributing among upper and lower extremity to have hypermobility and hypomobility based on regulation. So, this study was conducted to establish a standard for the effective pattern of hypermobility or hypomobility. I hope that the result of this study can help support the practics of physical therapy as a part of scientic method. Especially I think it will be able to be conductive to those who major in physical therapy on the arthrogenic region.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.39-46
• /
• 2012

The objectives of this study is intended to analyze stresses using the boundary element method and probability analysis for agricultural structure. Loads and material properties are an important factor when analyzing the structure. Until now, designing structure, loads and material properties are applied deterministic value. However, load and material properties involve uncertainties due to those change probabilistic and deterministic methods could not consider uncertainties. To solve these problems, the reliability analysis based on probability properties scheme was developed. Reliability analysis is easy to approach to analysis frame structure, however it has limitation when solving plane stress strain problems a kind of agricultural structures. The BEM (Boundary Element Method) is able to analysis plane strain problems by boundary conditions. Thus, this study applied boundary element method to analysis plane strain problem, load and material properties as a probabilistic value to calculate the analytical model using Monte Carlo simulations were developed.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.705-711
• /
• 1996

For the efficient production of 2, 5-diketo-gluconic acid (2, 5-DKG) by the immobilized cells of Erwinia herbicola, basic characteristics of 2, 5-DKG fermentation were analyzed and a process employing immobilized cell reactor was developed. The immobilized cells appeared to have diffusion limitation, and a maximum production of 2, 5-DKG was accomplished with 2 mm diameters of immobilized beads. Long-term stabilities of the immobilized cells could be maintained by addition of 1.75% (w/v) polypep- tone. Repeated batch fermentations with about 80 mol% of 2, 5-DKG yields were carried out six times in the fluidized bubble column reactors filled with immobilized cells at an aeration rate of 6 vvm.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.21-26
• /
• 1999

Liquefied petroleum gas(LPG) has been used as motor fuel due to its low emissions and low cost. The fuel feeding system has been improved with stringent requirement for exhaust emissions. LPG carburation system was firstly introduced, then the system changed into a gas injection system controlled precisely, but those gas feeding system has a limitation on improving power output. In order to improve an engine performance, a multi-point port injection system was introduced recently, and a liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray from diesel injectors. The spray images are visualized and compared with diesel sprays in a wide injection pressure range. The photographs show much wider dispersion of LPG sprays.

• 한국연소학회지
• /
• 제16권1호
• /
• pp.46-51
• /
• 2011

Exhaust gas of an industrial furnace used at such as metallurgy or ceramic manufacturing usually contains thermal energy with high temperature which can be recycled by heat exchanger. However, when the temperature of the exhaust gas is high such as more than $1,000^{\circ}C$, ordinary metallic heat exchanger cannot fully recover the heat due to the limitation of operating temperature depending on the material property. In the present study, a compact ceramic heat exchanger of cross flow type is introduced and evaluated by heat exchange rate and operating temperature. The ceramic heat exchanger can endure the gas temperature more than $1,300^{\circ}C$, and its volumetric heat exchanging rate exceeds 1 MW/$m^3$. The experimental data is also compared with the previous numerical result which shows reasonable agreement. Meanwhile, the gas leakage rate is measured to be about 3~4%, and heat loss to environmental air is about 23~26% of the fuel energy.

• Clinical and Experimental Pediatrics
• /
• 제49권10호
• /
• pp.1026-1030
• /
• 2006

Mental retardation(MR) is one of the most common developmental disabilities, which is characterized by deficits in intellectual and adaptive functions. Most children with MR have cognitive limitation in the mild range. With respect to the etiology, it is believed that genetic and environmental factors are interrelated and show variable pictures. Most children with MR present with speech and language delay during the early years. The diagnosis can be made by clinical features and neuropsychological tests of intelligence and adaptive functioning. The treatment is limited, but many associated problems are amenable to multidisciplinary interventions. The article will review the recent advances in the management of MR and other neurodevelopmental disorders in children.

• 경영과학
• /
• 제13권1호
• /
• pp.71-95
• /
• 1996

Many researchers have studied the theme on CASE technology. However, there are no many researches which lightened the diffusion of CASE technology and organizational change. The purpose of this study is to investigate the factors that influence on the diffusion of CASE technology and the way how IS organization changes as a result of the diffusion. We exploited a case study research as a methodology. We selected five software development firms which possessed the leading IS technology abilities as the case companies. We realized that the diffusion of CASE technology proceeded under the three context variables - managerial context of information systems, the intent and behavior of key players and implementation strategy of organization - to enhance the performance of information systems. The contribution of this study is to clarify the change of IS organization as a result of CASE technology diffusion. This study has the limitation that tried to analyze the organizational change only in a direction.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.67-70
• /
• 2006

Efficient scheduling for software development is a major concern for software engineers. A industry simultaneously performs a variety of projects with the limited resources without overdue. A way to overcome the limitation of resources is sharing of the resources through the projects. This study discusses the matrix organization for software development. A scheduling for matrix organization is a special case of project management problem. The ultimate goal of scheduling problem in this study is to reduce the overall duration of the multiple projects. A genetic algorithm is presented to solve the scheduling problem of the matrix organization and is substantiated with numerical results.