• 건설안전기술
• /
• 통권47호
• /
• pp.56-62
• /
• 2008

In order to apply the Limit Equilibrium Method generally used for the slope stability analysis to the vertical excavation walls reinforced by soil-nailing, in this study, the Limit Equilibrium Method for the temporary shoring facilities reinforced by soil-nailing was proposed, which is based on the stability for the horizontal displacement. In this study, the relation of the internal friction angles of the ground and the vertical excavation depths was arranged, which is satisfying the stability on the horizontal displacement by using the verification of the Limit Equilibrium Method. And then, the rational reinforcing length of soil-nailing was proposed for the critical areas. In addition, the modified safety ratio satisfying the stability on the horizontal displacement was proposed, when the Limit Equilibrium Method was applied to the vertical excavation walls reinforced by soil-nailing.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.643-650
• /
• 2002

The large planar failure has occurred in a rock cut slope of highway construction site in Boeun. This area is considered as unstable since the discontinuities whose orientations are similar to the orientation of the failure plane, are observed in many areas. Therefore, several analysis techniques such as SMR, stereographic analysis, limit equilibrium, numerical analysis, which are commonly used in rock slope stability analysis, are adopted in this area. In order to analyze the stress redistribution and nonlinear displacement caused by cut, which are not obtained in limit equilibrium method, the UDEC and shear strength reduction technique were used in this study Then the factors of safety evaluated by shear strength reduction technique and limit equilibrium were compared. In addition, the factor of safety under fully saturated slope condition was calculated and subsequently, the effect of the reinforcement was evaluated.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.534-537
• /
• 2007

The soil nailing was generally using method in practical business, in application of the soil nailing, the analysis was primarily used to Beam-Colum Method, Finite Element Method and Limit Equilibrium Method. Beam-Colum Method and Finite Element Method were able to examine transformation but widely using Limit Equilibrium Method wasn't able to examine transformation and displacement Therefore, this study was focused on presenting stability in comparison with former study-results about horizontal displacement of the soil nailing retaining-walls satisfing a criterion safety factor of Limit Equilibrium. There were performing comparison field measurements and former study-results in first step.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 사면안정 학술발표회 논문집
• /
• pp.81-98
• /
• 1998

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.91-103
• /
• 1995

The reaction rate, equilibrium, and flow injection analysis methods were fundamentally evaluated for the determination of aqueous ammonia. The selected indophenol blue method was based on the formation of indophenol blue in which ammonium ion reacted with hypochlorite and phenol in alkaline solution. In the optimized reaction condition, the reaction followed 1st order reaction kinetics and the final product was stable. The absorbance measurements before and after the equilibrium were utilized for the reaction rate and equilibrium methods. The reaction rate methods, based on the relative analytical signals for the possibility of eliminating interferents, were shown to have good linear calibration curves but the detection limit and the calibration sensitivity were poorer than those in the equilibrium method. The detection limits were 32-49 pub and 24 pub for the reaction rate and equilibrium methods, respectively In the flow injection analysis, the absorbance was measured before the equilibrium reached and thus resulted in 30% reduction of calibration sensitivity. However, the detection limit was 11 ppb, indicating that the peak-to-peak noise for the blank was remarkably improved. Compared to the manual methods, the optimized experimental condition in a closed reaction system reduced the blank absorbance and the inclusion of ammonia from the atmosphere was prevented. In addition, highly reproducible mixing of sample and reagents and analytical data extracted from continuous recording showed excellent reproducibility.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1351-1358
• /
• 2008

This paper presents how the load transfer mechanism of the ground anchor affects on the stability analysis of anchored slope. The finite element analysis and the conventional limit equilibrium analysis on the anchored slope were performed and compared. The limit equilibrium analysis of the anchored slope is quite open used in design practice due to the easiness of the analysis. However, the load transfer mechanism is not considered properly for the analysis. When the failure surface passes through the bonded length of an anchor, the anchor load is disregarded and the factor of safety for the anchored slope is smaller than it should be. In this study, the load transfer distribution was incorporated into the limit equilibrium stability analysis of the anchored slope and the results were compared with the results of finite element analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1113-1124
• /
• 2009

The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.33-41
• /
• 2003

연구대상 사면은 충북 보은군 보은읍 도로공사구간 내의 절취사면으로 절취시공 후 암반사면내의 일부 구간에서 평면파괴로 인한 사면 붕괴가 발생하였다. 이 구간에서는 파괴면과 유사한 방향성을 갖는 불연속면이 암반사면 내에 다수 분포하여 추가 붕괴가 예상되는 불안정한 상태이다. 따라서, 본 사면에 대하여 암반사면의 안정성 해석에 보편적으로 사용되는 SMR, 평사투영법, 한계평형법 및 수치해석 등의 기법을 이용하여 사면의 안정성을 해석하였다. 사면의 안정성평가에 보편적으로 사용되는 한계평형법은 간단한 계산에 의해 사면의 안정성을 평가할 수 있는 장점이 있으나 파괴 활동면을 가정할 수 없는 단일 안전율에 의해 전체 사면의 안정성을 평가하는 단점이 있다. 따라서, 본 연구에서는 개별절리를 고려하여 사면의 안정성을 평가하는 전단강도 감소기법으로부터 안전율을 계산하였으며, 이를 한계평형해석의 결과와 비교ㆍ분석하였다. 또한 본 사면내에 지하수 영향을 고려하고 보강공법을 적용하여 종합적인 안정성을 검토하였다.

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.85-96
• /
• 2004

본 연구는 점토층위의 모래지반에 위치하는 표면기초의 극한지지력에 대해 이론적으로 조사하였다. 실용적인 적용을 위하여 표면기초의 지지력에 관한 연구들에 대한 검토와 논의가 제시되며, 한계해석(Limit Analysis)의 운동학적 접근방법을 이용하여 정해의 극한 지지력이 계산되었다. 운동학적 해는 상한값이며 해의 정확성은 파괴메카니즘의 형상에 달려 있다. 이러한 방법은 설계도표를 만드는데 편리할 뿐만 아니라 물성치의 영향을 추정할 수 있다. 본 연구에서는 범용 유한요소해석 프로그램인 ABAQUS를 사용하여 탄소성 이론에 근거하여 극한지지력을 계산하였다. 운동학적 방범으로 계산된 결과와 유한요소 해석, 한계평형론에 근거한 몇몇 알려진 식들(Yamaguchi, Meyerhof와 Okamura 등)에 의한 결과를 비교하였다. 아울러, 운동학적 방법에 의한 제안식과 유한요소해석 결과와 한계평형해석 결과의 유효성에 대하여 검증하였다.

• 충청수학회지
• /
• 제28권3호
• /
• pp.465-472
• /
• 2015

In this paper, we study the existence and the stability of equilibria of predator-prey models with Ivlev's functional response. We give a simple proof for the uniqueness of limit cycles of the predator-prey system. The existence and the stability at the origin and a boundary equilibrium point(including the positive equilibrium point) are also investigated.