• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1484-1488
• /
• 2009

본 논문은 LED조명기구의 상용화에 가장 큰 문제로 제기되는 방열설계에 관한 논문으로서, COMSOL을 이용한 방열해석을 통하여 문제해결의 방법을 제시한다. COMSOL Multiphysics에 있는 Heat Transfer Module의 Transient Analysis를 활용하여 해석한 결과, 시뮬레이션 값과 시작품 제작 후 측정 온도와의 차이가 10[$^{\circ}C$]이하로 도출되었으며, Led Lamp가 설치되는 실내.외의 환경조건의 온도변화에 따른 제 요소들을 잘 활용하면 실제 작품의 목표치에 근접하는 결과를 얻을 수 있음을 확인할 수 있었다.

• 설비공학논문집
• /
• 제28권3호
• /
• pp.115-122
• /
• 2016

In this study, 21 energy reduction factors were selected as architecture, system & operation, and lighting and equipment parts to analyze reduction method of the load occurring in office buildings. Energy consumption simulation was performed. In the architecture part, saving rate (1.53%) of "occupant density" factor was the most efficient. In the system and operation part, saving rate (1.28%) of "interior VAV and exterior FPU type" factor was the most efficient. In case of lighting and equipment part, saving rate (12.42%) of "schedule" factor was the most efficient. In the three parts, saving rate of the lighting and equipment part was 27.32%. This was caused by the "schedule" factor. Saving rates of the architecture part and the system and operation part were 3.39% and 1.20%, respectively.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.112-121
• /
• 2011

To lead lighting inside, design solution and mechenical solution can be used.A inner court and atrium are samples for design solution. However, physical and environmental elements for building design are not taken positively into consideration. So low position of the inner court is difficult to reach lighting performance and a urban landscape gets damaged. On this study, selecting a building with a inner court, best design method is suggested to apply reflecting mirror. building direction, building shape and solar position are considered to deside the setting angle for reflecting mirror. Performance for the setting reflecting mirror is verified through various simulation cases, and is got more lighting performance than the present situation on the building inside.

• Journal of Biosystems Engineering
• /
• 제37권5호
• /
• pp.314-318
• /
• 2012

Purpose: This study was conducted to develop a measurement system for determining photosynthetic photon flux (PPF) distribution and illumination efficiency of LED lamps. Methods: The system was composed of a linear moving sensor part (LMSP), a rotating part to turn the LMSP, a body assembly to support the rotating part, and a motor controller. The average PPF of the LED lamp with natural cooling and water cooling was evaluated using the measurement system. Results: The PPF of LED lamp with water cooling was 3.1-31.7% greater than that with natural cooling. Based on the measured value, PPF on the horizontal surface was predicted. Illumination efficiency of the LED lamp was slightly increased with water cooling by 3.4%, compared with natural cooling. A simulation program using MATLAB was developed to analyze the effects of the vertical distance from lighting sources to growing bed, lamp spacing, and number of LED lamps, on the PPF distribution on the horizontal surface. The uniformity of the PPF distribution of the LED lamps was fairly improved with 15 cm spacing, as compared to the 5 cm spacing. By simulation, PPF of $217.0{\pm}27.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was obtained at the vertical distance of 40 cm from six LED lamps with 12 cm spacing. This simulated PPF was compared to the measured one of $225.9{\pm}25.6{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After continuous lighting of 346 days, the relative PPF of LED lamps with water cooling and natural cooling was decreased by 6.6% and 22.8%, respectively. Conclusions: From these results, it was concluded that the measurement system developed in this study was useful for determining PPF and illumination efficiency of artificial lighting sources including LED lamp.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.18-25
• /
• 2006

야간도시경관의 미적향상, 시각적 안전의 확보 및 빛 공해 방지 등을 고려한 기존의 경관조명 평가방법은 대부분 측정점을 한 지점으로 한정하여 조명물리량을 분석함으로써 거리에 따른 평가결과의 다양성이 소홀히 취급되었다. 본 연구는 측정거리의 변화에 따른 평가대상 구조물의 표면휘도를 고려한 경관조명 평가방법을 제시하는데 연구의 목적이 있다. 이를 위하여 경관조명이 설치된 한강의 교량을 대상으로 CS-100과 ProMetric 1400 등 디지털 측광기기와 경관조명 소프트웨어 Lightscape v3.2를 활용하였다. 즉 측정거리 100[m], 300[m], 500[m]로 구분하여 현장측정 및 컴퓨터 시뮬레이션을 실시한 결과 거리변화에 따른 휘도의 평가방법은 대상 구조물로부터 약 100[m] 이내에서 실시하는 것이 휘도측면에서 유리한 것으로 나타났다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1550-1559
• /
• 2013

Light emitting diode(LED) lighting has been applied various industry fields because of its high efficiency, low power consumption, long life time, and environment friendly characteristics. Generally, LED lighting needs a driver to maintain constant current. Most popular driver is the switching converter. In the converter, there are several electrolytic capacitors. However the lifespan of the electrolytic capacitor is much shorter than LED. Therefore the lifespan of LED lighting with electrolytic capacitor is decreased. Also, LED lighting needs dimming control because of various needs and energy saving. This paper presents the dimmable single-stage PFC DCM flyback converter without electrolytic capacitor and parallel LC resonant filter for reducing 120[Hz] ripple on the output. The type 2 controller is used to maintain constant current and the analog dimming control is used. The proposed converter is verified through simulation and experimental works.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.606-611
• /
• 2014

Recently, LED lighting fixtures for crosswalk become popular in order to recognize the pedestrians at crosswalk, which can enhance the safety of the pedestrian at crosswalk. However, there are several problems related to the LED lighting fixtures for crosswalk, such as a lot of energy consumption due to a constant illumination during night and glaring of pedestrians at the opposite side of crosswalk. In this study, in order to overcome these problems, we have investigated a novel LED lighting fixture for crosswalk, which has two modules with different angles ($60^{\circ}$, $120^{\circ}$). Illuminance of min and max at four-line city street crosswalk shown 50 Lux, 125 Lux, respectively. Illuminance of min and max at eight-line city street crosswalk shown 150 Lux, 200 Lux, respectively. Simulation investigation was optimized design using optical program. Prototype was verified measurement by goniometer system.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.101-107
• /
• 2009

기존의 조명기기 효율향상은 장려금 지원과 에너지절약 정보제공 등의 정부 지원제도로 인해 지속적으로 개선되었다. 그러나 현재 조명기기의 사용 패턴은 사용자의 취향이 고급화, 다양화됨에 따라 더 높은 조도와 간접조명이 더욱 확대되고 있다. 본 논문은 이와 같은 변화에 맞추어 점점 사용이 늘고 있는 FPL55[W]램프 안정기를 대체할 수 있는 FPL45[W]램프 안정기의 경제성평가 및 시뮬레이션을 통해 전력수요관리를 위한 제도적 도입방안을 검토하고자 하였다.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2007

본 연구는 실내로 유입되는 주광을 조광제어시스템의 적용에 효율적으로 활용하여 초과한 인공조명의 광량을 줄임으로써 에너지 절약의 효과를 높이고자 함이다. 광센서는 탐지된 광속량을 신호로 보내고 그에 알맞은 제어신호를 받아 조광율을 결정하는데, 일반적으로 사무공간에서 인공조명의 개수나 행수만큼 광센서가 설치가 되어 조명기구의 각 구역마다 다른 조광율로 조광제어를 하는 것이 인공조명 제어측면에서는 효율적이나, 시스템 설치비용측면에서는 비효율적이다. 그러므로 실험과 시뮬레이션을 통하여 미리 유입되는 주광 분포를 파악하고 조광율을 분석한다면, 하나의 광센서 설치로써 인공조명 구역간의 각기 다른 조광율로 제어가능하다.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.613-617
• /
• 2017

Due to optimal advances such as chromatic performance, durability, low power consumption, high efficiency, long-lifetime, and excellent environmental friendliness, white LEDs (WLEDs) are widely used in vehicle front lighting, backlighting, decorative lighting, street lighting, and even general lighting. In this paper, the remote packaging WLEDs (RP-WLEDs) with bi-layer red-emitting $Sr_2Si_5N_8:Eu^{2+}$ and yellow-emitting YAG:Ce phosphor was proposed and investigated. The simulation results based on the MATLAB software and the commercial software Light Tools indicated that the color rendering index (CRI) of bi-layer phosphor RP-WLEDs had a significant increase. The CRI had a considerable increase from 72 to 94. In conclusion, the results showed that bi-layer red-emitting $Sr_2Si_5N_8:Eu^{2+}$ and yellow-emitting YAG:Ce phosphor could be a prospective approach for manufacturing RP-WLEDs with enhanced optical properties.