• Particle and aerosol research
• /
• v.6 no.4
• /
• pp.165-172
• /
• 2010

Titania is widely used as an effective photocatalyst for the photodegradation of environmental pollutants in air. In this study, novel N-doped $ZrO_2/TiO_2$ photocatalysts were synthesized via sol-gel method and characterized by UV-Vis spectrophotometer, transmission electron microscope, and X-ray diffractometer. N-doped $ZrO_2/TiO_2$ photocatalysts were nano-sized with an average particle size of about 20 nm. The XRD pattern of N-doped $ZrO_2/TiO_2$ photocatalysts showed both anatase and rutile phases. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was evaluated by degradation of NO under UV and visible light irradiation at various parameters such as amount of photocatalyst, concentration of NO, and intensity of light. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was effective for the enhancement of the degradation of NO and higher than that of $TiO_2$ photocatlysts under UV and visible light irradiation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1276-1291
• /
• 2014

In the field of visible light communication (VLC), light-emitting diodes (LEDs) are used for transmitting data via visible light. In this study, we analyze pulse dual slope modulation (PDSM) as a means of delivering information in VLC. PDSM involves the modulation of symmetrical slope pulses to encode binary 0s and 1s, and owing to the moderately increasing and decreasing pulse shapes that are created, this method enables more spectral efficiency than the variable pulse position modulation (VPPM) technique currently adopted in IEEE 802.15.7. In particular, PDSM allows for the avoidance of intra-frame flicker by providing idle pulses in a spectrum-efficient way. A simple detection scheme is proposed for PDSMsignals, and its bit error rate (BER) is analyzed mathematically at varying slopes to validate the process through simulation. The BER performance of PDSM detection using dual sampling is compared to the performances of PDSM and VPPM using correlation detection. It is found that, when the probability of idle pulse transmission is less than 0.08 and higher than 0, the BER of dual sampling PDSM is lower than that of PDSM using correlation detection over the entire light intensity range.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.115-122
• /
• 2012

In this paper, we demonstrate that indoor wireless optical communication is possible with lighting LEDs without a photo diode or a solar cell. A LED is used for both light emitting and light signal detection. This scheme is very useful because transmission is possible without any additional communication systems. In experiments, wireless optical communication will be carried out at a higher signal frequency of 5MHz using a lighting LEDs with both light emitting and light detection characteristics in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.527-532
• /
• 2013

The wireless visible light communication technology has received great attention for high-data rate services in the room and underwater. However, performance of a visible light seawater link is limited by multiple constraints from the current light source and detector technology, and underwater channel conditions. In this paper, performance of the line of sight underwater link was analyzed in terms of signal to noise ratio and bit error rate of the detector. Roles of different parameters such as data rate, transmission distance, and attenuation coefficient, are studied. Through the modeling and simulation of the OOK and L-PPM modulation technologies for undersea environment application, the advantages and limitations are described in detail.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.247-255
• /
• 2012

Daylighting has a very effective role in reducing power consumption and improving indoor environments in office buildings. Previously, it was not under consideration as a major source of renewable energy due to poor reliability in the design. Optical fiber as a transmission medium in the daylighting system demands uniform distribution of light to solve cost, heat, and efficiency issues. Therefore, this study focuses on the uniform distribution of sunlight through the fiber bundle and to the interior of the building. To this end, two efficient approaches for the fiber-based daylighting system are presented. The first approach consists of a parabolic mirror, and the second approach contains a Fresnel lens. Sunlight is captured, guided, and distributed through the concentrator, optical fibers, and lenses, respectively. At the capturing stage, uniform illumination solves the heat problem, which has critical importance in making the system cost-effective by introducing plastic optical fibers. The efficiency of the system is increased by collimated light, which helps to insert maximum light into the optical fibers. Furthermore, we find that the hybrid system of combining sunlight and light emitting diode light gives better illumination levels than that of traditional lighting systems. Simulation and experimental results have shown that the efficiency of the system is better than previous fiber-based daylighting systems.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.241-244
• /
• 2011

An isolator transmits light in the forward direction and blocks light from passing in the reverse direction. It is regarded an essential optical component in medical, industrial, and research lasers for blocking reflection beams that cause optical damage and noise. It is also used as a communicative light intensifier to expand the lifespan of devices and enhance transmission quality. This study analyzed the characteristics of the core components in the construction of a polarization-independent isolator, namely, the walk-off polarizer and the Faraday rotator. Measurement of the extinction ratio of the resultant walk-off polarizer revealed that the ratio between the vertical and horizontal rays was 1,050:1 with a laser output of 0.032 W and 1,010:1 with a laser output of 2.68 W, thus presenting ratios similar to 1,000:1. In addition, the walk-off polarizer and Faraday rotator constructed in this study were used to compare output changes according to changes in power of input light and to check the penetration ratio. Results from the study presented variations in output value according to changes in power of input light. However, the average penetration ratio remained relatively consistent (~81.4%).

• Journal of Information Display
• /
• v.13 no.2
• /
• pp.91-95
• /
• 2012

Indium phosphide (InP) quantum dots (QDs) are considered alternatives to Cd-containing QDs for application in light-emitting devices. The multishell coating with ZnSe/ZnS was shown to improve the photoluminescence quantum yield (QY) of InP QDs more strongly than the conventional ZnS shell coating. Structural proof for this system was provided by X-ray diffraction and transmission electron microscopy. QY values in the range of 50-70% along with peak widths of 45-50 nm can be routinely achieved, making the optical performance of InP/ZnSe/ZnS QDs comparable to that of Cd-based QDs. The fabrication of a working electroluminescent light-emitting device employing the reported material demonstrated the feasibility of the desired application.

• Journal of Broadcast Engineering
• /
• v.24 no.7
• /
• pp.1246-1258
• /
• 2019

Since light field (LF) image has huge data volume, it requires high-performance compression technique for efficient transmission and storage of its data. Camera users may like to represent parts of image at different levels of focus at their choice anytime. To address this refocusing functionality, in this paper, we first render a focal stack consisting of multi-focus images, then compress it instead of original LF data. The proposed method has advantage of minimizing the amount of LF data to realize the targeted refocusing applications. Our experiment results show that the proposed method outperforms the state-of-the-art for LF image compression method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.323-332
• /
• 2003

We have proposed and implemented a novel cost-effective optical subcarrier mutiplexing transceiver for base station without light sources in which optical signal can be transmitted bidirectionally over a single optical fiber. Modulated optical signal is retransmitted from the base station to the central office using a ring-type base station which consists of a circulator and an Mach-Zehnder modulator, where the optical source is supplied from the central office. In order to investigate the feasibility of the proposed base station without light sources, we have measured adjacent channel power ratio and carrier to noise ratio by transmitting the IS-95 CDMA signal and 14 tones carrier signal bidirectionally through the system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.931-934
• /
• 2001

GaN nanowires has much interest as one-dimensional materials for blue light LED. GaN-based materials have been the subject of intensive research for blue light emission and high temperature/high power electronic devices. In this letter, the synthesis of GaN nanowires by the reaction of mixture of GaN nanowires by the reaction of mixture of Ga meta and GaN powder with NH$_3$ using thermal chemical vapor deposition is reported. X-ray diffraction, energy dispersive x-ray spectrometer, scanning electron microscopy, and transmission electron microscopy indicate that those GaN nanowires with hexagonal wurtzite structure were about 60nm in diameter and up to several hundreds of micrometers in length.