• KSBB Journal
• /
• v.26 no.1
• /
• pp.87-91
• /
• 2011

Automatic counting of yeast cells in baker's yeast culture was tried using a conventional light microscope equipped with a pc camera. Relatively good binary image was obtained by using white LED as microscope light source, but uneven brightness distribution in original image hindered counting accuracy. A block binarization method using local thresholds proportional to local brightnesses was used to get improved binary images. The brightnesses of the blocks were expressed as the value component in HSV color model. Good quality binary images were obtained by binarization on $8{\times}6$ blocks of original images and connected-component labelling of the binarized images produced reliable counting results in the concentration range $1.4{\times}10^5/mL{\sim}1.4{\times}10^7\;cells/mL$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1354-1356
• /
• 2009

In this paper, we explained characteristics of integral imaging microscope using point light source. To display the bio-medical information, which is captured as a form of the elemental images, using autostereoscopic displays, the characteristics analysis of three-dimensional information is required. For integral imaging microscope using point light source array, the elemental image capturing configuration has to satisfy a specific condition. We explain the condition to capture the elemental images and show the experimental results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.313-324
• /
• 1997

The aim of the present study was to describe an safe and convenient method for the early detection of enamel caries using laser fluorescence. Fluorescence from natually carious lesion of human teeth illuminated by an argon laser(488nm) was observed and photographed using barrier filter. Intact enamel was found to fluorescence with a yellowish light. Whereas, incipient caries lesions in the enamel were dearly visible as dark areas in contrast to the fluorescence surroundings. For evaluation of accuracy of this method, lesion depth measured by the laser fluorescence in light microscope was compared with that polarizing microscope. The results from the present study can be summarized as follows : 1. Enamel caries of smooth surface was observed as pale white spot and undefined outline in ordinary light. Whereas, lesion was clearly visible as dark spot in laser fluorescence. 2. There was no difference between ordinary light view and laser fluorescence in occlusal surface and interproximal surface. 3. There was no significant difference between the lesion depth observed by laser fluorescence with light microscope and polarizing microscope. Apparent correlation exists between two groups.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.425-427
• /
• 2004

Many of the problems by using the microscope are related to the fact that the eyes of the surgeon must be continually fixed to the microscope eyepieces. In this paper, we describe a development of the stereoscopic monitoring system of the stereo microscope for reduced eyestrain or operator fatigue about the long time observations of the microscope. The system consists of the stereoscopic camera part, the stereoscopic image processor device and the polarized light stereoscopic monitor. The left and right images obtained form the two CCD cameras are the same as the eyepiece images. By use of the image processor, the polarized light stereoscopic monitor displayed a real-time stereo microscope images.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.494-497
• /
• 2003

We report the dark spots in organic light emitting diodes by using a near-field scanning microwave microscope. Devices structure was glass / indium-tin-oxide(ITO) / copper-pthalocyiane(Cu-Pc) / tris-(8-hydroquinoline)aluminum(Alq3) / aluminum(Al). We made artificial dark spots by using a etching technique on a ITO substrate. Near-field scanning microwave microscope images and reflective coefficient of dark spots were measured and compared by the change of various applied voltage changes 0-15V.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.137-147
• /
• 1988

This study was designed to investigate the effects of irradiation on the salivary ductal cells, especially on the intercalated ductal cells of the rat parotid glands. For this study, 36 Sprague-Dawley strain rats were irradiated on the head and neck region with absorbed dose of 15Gy by Co-60 teletherapy unit, Picker's model 4M60. The conditions irradiated were that field size, SSD, dose rate and depth were 12×5㎝m, 50㎝, 222 Gy/min. and 1㎝. respectively. The experimental animals were sacrificed 1, 2, 3, 6, 12 hours and 1, 3, 7 days after the irradiation and the changes of the irradiated intercalated duct cells of the parotid glands were examined under the light and electron microscope. The results were as follows: 1. Under the light and electron microscope, the nucleus, mitochondria and secretory granules showed severe changes in the early stage after irradiation and the most severe cellular de- generations were observed 2 hours after irradiation, but the repair processes began from 6 hours after irradiation. 2. Under the electron microscope, loss of the nuclear membranes, derrangement of the chromosomes, swelling and destruction of the secretory granules, and widening of the intercellular spaces were observed after irradiation. 3. Under the light microscope, atrophy and irregular proliferation of the ductal cells, cuboidal metaplasia, hyperchromatism, and the construction or obstruction of the lumen were observed after irradiation.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.423-429
• /
• 2004

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength using confocal laser scanning microscope and microtensile bond strength test. Flat occlusal dentin surfaces were prepared using low-speed diamond saw. In group I, Scotchbond Multipurpose (SM) was applied by manufacturer's recommendation. In group II, after Adper Prompt L-Pop was applied for 15s and light cured for 10s. the second coat was re-applied and light-cured. In group III, after light-curing the second layer. the third coat was re-applied and light-cured. Specimens bonded with a resin-composite were sectioned into resin-dentin stick for measuring the adhesive layer thickness by confocal laser scanning microscope and evaluating micro-tensile bond strength. The adhesive layers of three-step dentin adhesive system. 3 coats of Adper Prompt L-Pop had significantly thicker than SM. 2 coats of Adper Prompt L-Pop (p < 0.05). However. there was no significant differences in bond strengths between SM and 3 coats of Adper Prompt L-Pop (p > 0.05). And SM. 3 coats of Adper Prompt L-Pop had significantly higher than 2 coats of Adper Prompt L-Pop in bond strengths (p < 0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.524-534
• /
• 2000

Deciduous teeth can be extracted for two reasons, one due to the physiologic resorption and the other by the inflammation at the apex after traumatic injury. Physiologic resorption may be different from pathologic resorption in timing and mechanism. Therefore we resumed the different features of physiologic and pathologic resorption root surfaces. Many previous studies showed micromorphology of resorbed surface of roots of deciduous teeth. But, few studies compared physiological and pathological root resorption surfaces. In this study, we carefully observed microscopic morphologies of those two different root surfaces by scanning electron microscope and histologic features by light microscope. The resultant differences between physiologic and pathologic resorption surfaces of deciduous teeth were as follows: 1. The morphology of pathologic resorption lacunae due to inflammation varied in size and shape with irregular boundaries compared with the physiologic areas from scanning electron microscope observations. 2. From light microscope observations, several large resorption fossae containing numerous resorption lacunae were found, whereas the resorption lacunae were irregular in shape with pathologic resorption surface. 3. Numerous multinucleated giant cells were closely attached to the physiologic resorption lacunae, whereas several kinds of mesenchymal cells with numerous inflammatory cells were found in the areas adjacent to the pathologic resorption surface. 4. Light microscope findings showed that compensating cementum formation took place along some of the areas of inflammatory dentinal resorption. In conclusion, several morphological differences were present between physiologic and pathologic root resorption surfaces of human deciduous teeth. The future studies should include cytochemistry to clarify the cellular roles in resorption process observations of pulpal surfaces of coronal and radicular dentin to and the changes that occur in each phase of human deciduous tooth resorption.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.336-341
• /
• 1982

The histochemical examination of Undaria pinnatifida Laver were conducted with light microscope and electron microscope. The results obtained were as follow: 1. Undaria pinnatifida frond were composed with epidermis, cortex and medulla. But the cutting section of Undaria pinnatifida Laver showed that only the epidermal cell were bound to each other. The cortex and medulla of the frond were destroyed during U.P. Laver process. 2. To identification of bind material of U.P. Laver, which were treated with sodium carbonate solution for extraction of alginic acid and reacted with Periodic Acid Schiff(PAS) reagent. And the PAS reaction result was negative by light microscope observation. On this result, we found out that the alginic acid has the binder role of U.P. Laver. 3. Also, the bind structure of U.P. Laver were observed by electron microscope and could well find out the epidermal cell wall and bind position of alginic acid, which were could not observed by light microscope.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.298-299
• /
• 2008

Images of deposited layers of organic light-emitting diodes were observed by scanning-electron microscope (SEM). We were able to see a clear cross-sectional view of deposited layers. The SEM is a type of electron microscope that images the sample surface by scanning it with a high-energy beam of electrons in a raster scan pattern. A thickness of deposited layer measured by thickness monitor is close to a real value measured by a-step surface profiler within 5%. We were able to see a formation of domains of size about 50-100nm from a surface morphology of Al, and pin holes of size about 50nm.