• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1067-1068
• /
• 2010

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.188-191
• /
• 2016

본 논문에서는 조도 감지기를 이용하여 사용자가 설정한 조도량에 따라 점등되는 방식의 절전형 간판 자동 전원 제어기를 제안한다. 조도량 설정 방식은 사용자의 편리성을 감안하여 조도량 단위별 구간 분류 알고리즘을 통해 설정 과정이 누구나 쉽게 조작이 가능한 가변저항 방식을 제안한다. 자동 점등의 기준이 되는 조도량의 데이터는 조도 감지기가 측정한 조도량을 무선 통신을 통해 간판 자동 전원 제어기에 보내어 간판의 점등을 제어하게 된다. 본 논문에서 제안된 조도 감지기를 이용한 절전형 간판 자동 전원 제어기의 성능을 평가하기 위하여 공인 시험기관에서 외부의 빛이 모두 차단된 상태에서 시험한 결과, 각 구간별로 오차율이 ${\pm}3%$ 이하로 측정되어 우수한 성능을 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.17-22
• /
• 2008

본 논문에서는 광량 변화에 따른 저전력 작은 면적을 가지는 포토플래시 용 펄스폭 변조기를 제안한다. 광량 제어 회로는 정전용량, 포토다이오드, 그리고 비교기로 꾸밀 수 있다. 제안된 펄스폭 변조기는 대기 전력 소모를 줄이기 위해서 비교기를 제외한 모든 부분을 디지털회로로 설계하였다. 그리고 IGBT 드라이버는 지연 소자를 사용하여 단락 방지 회로를 추가하였다. 제안된 펄스폭 변조기는 $0.5V{\sim}2.5V$의 변조 신호 전압의 범위와 300Hz 동작 속도에서 $0.14ms{\sim}1.65ms$의 펄스폭 변조 범위를 가진다. 제안된 펄스폭 변조기는 $0.35{\mu}m$ CMOS 공정으로 제작되었으며, $0.85mm{\times}0.56mm$의 면적을 가진다. 제안된 회로는 300Hz 그리고 3.0V에서 3.0mW의 전력을 소모한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.497-497
• /
• 2007

We developed the light medical therapy apparatus for external injury cure using a ${\mu}$-controller. This equipment was fabricated by using a high brightness LEDs and a ATmega 128, and designed to enable us to control irradiation timer, intensity and reservation. Especially, to control the light irradiation frequency, and to control the change of output value, TLC5941 was used. Control stage is divided into 4 step by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and the output of a high brightness LEDs could be controlled, stage by stage. In this paper, the designed device was used to find out how a high brightness LEDs light source affects the skin wound of a small animal. In result, compared with none light irradiation animal, the lower incidence of inflammation and faster recovery was shown in light irradiation animal.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.131-136
• /
• 2015

We develop the 60 W class hybrid solar LED street lamp controller. The controller is providing power via an inverter in the day with the least solar cell and battery and charging the battery for the ESS, acts as a power failure, the built-in battery. Rated output of the fabricated LED street lamp is 300 W or greater battery capacity 300 Wh, discharge time 10 hr, LED street lamp efficiency showed a very high level of light efficiency by about 127 lm/W. In addition, as a result of light distribution pattern according to the distance and the light intensity measurement will be able to ensure a very high quality, show the constant brightness in the distance from the road lights 6 m is about 35~40 lux in uniformity ratio. The proposed hybrid solar LED street lamp system showed a high energy capacity of approximately 1.5 to 152.7% power generation efficiency than typical conventional solar street lamp.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.167-170
• /
• 2004

A high light lantern system using LEDs is composed of power supply, flash controller, and daylight controller and proper case considering work condition. The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent electric lamp and that of foreign products(Vega LED lantern made in New Zealand, Tideland system made in America). The electric consumption of our products is 30% compared with that of existing marine lantern using an incandescent electric lamp, and the luminous Intensity of them is 200% to 400% compared with that of existing marine lantern and foreign LED lantern. In addition, our LED lantern system is easy to repairing something wrong and changing the LED module and other controllers on the sea when they are in accident.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1087-1092
• /
• 2007

We developed the 4-channel Light Medical Therapy Apparatus for Skin Injury Cure using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In this paper, the designed device was used to find out how high brightness LED light affects the skin injury of SD-Rat(Sprague-Dawley Rat). In the experiment, $1\;cm^2$ wounds on the skin injury of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 14 days. In result, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.