• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.248-251
• /
• 2007

본 논문은 3차원 얼굴 영상을 복원하기 위해 구조 광(structured light) 영상에서 2차원 메쉬를 추정하는 방법을 제안한다. 프로젝터를 사용하여 얼굴에 구조 광을 투영하고 카메라로 찍어 구조 광 영상을 획득한다. 획득한 영상에서 투영된 격자점을 추출한다. 격자점들의 위치와 각도를 사용하여 2차원 메쉬를 추출한다. 추출 과정에서 발생한 오류를 편집하고 정확한 2차원 메쉬를 추출한다.

• 공업화학
• /
• 제32권2호
• /
• pp.214-218
• /
• 2021

We investigated the optimal stacked structure from the perspective of process architecture (PA) through emission spectrum analysis according to the wavelength of quantum dot (QD)-organic light-emitting diodes (OLED). We confirmed that the blue-light leakage through the QD can be minimized by increasing the QD filling density above a critical value in the red QD (R-QD) layer. In addition, when the thickness of red-color filter (R-CF) at the upper part of the R-QD increased to more than 3 ㎛, the leakage of blue light through the R-CF was effectively blocked, and a very sharp emission spectrum in the red wavelength band could be obtained. According to these outstanding results, we expect that the development of QD-OLED displays with very excellent color gamut can be possibly realized.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.353-358
• /
• 2008

AlGaInP 기반 수직형 적색 LED (Light Emitting Diode)의 광추출효율을 증가시키기 위하여 화학적 etching 기술을 이용하여 n-AlGaInP 표면에 삼각꼴 모양의 거칠기를 형성하였다. Etching은 $H_3PO_4$계의 용액을 이용하여 화학적 etching을 진행 하였다. AlGaInP etching은 광추출효율의 증가와 밀접한 관련을 갖고 있으며 AFM (Atomic Force Microscope)을 이용하여 AlGaInP 표면을 분석하여 약 44 nm의 RMS (root-mean-square) 거칠기가 형성됨을 알 수 있었다. 광추출효율은 기존 수직형 적색 LED보다 거칠기가 형성된 수직형 적색 LED에서 41%의 높은 발광 효율을 보임으로써 고효율 수직형 적색 LED의 가능성을 보였다.

• 한국광학회지
• /
• 제31권4호
• /
• pp.176-182
• /
• 2020

서브-미크론 주기의 미세한 회절 격자가 새겨진 도광판을 이용하여 빛을 수직으로 출사시켜 기존 방식에서 사용하는 집광용 프리즘 필름을 대체할 수 있는 가능성에 대하여 연구하였다. 시뮬레이션과 실험을 통해 최적 회절 격자 주기를 결정하였고, 입사되는 빛의 고도각과 방위각에 따라 회절 격자의 투과 모드 효율을 계산하였다. 또한, 회절에 의해 더 많은 빛을 추출할 수 있도록 도광판의 모양과 구성을 제안하여 고도각과 방향각을 최적화하는 두 가지 방식의 효과를 시뮬레이션으로 비교하였다. 광선 추적프로그램을 활용하여 회절 격자 각인 도광판의 휘도 각 분포를 계산하여 실제로 제작된 시제품의 위치별 휘도 각 분포와 비교하였다.

• 공업화학
• /
• 제7권1호
• /
• pp.162-170
• /
• 1996

접촉분해경유(Light Cycle Oil : LCO)중에는 엔지니어링 플라스틱 및 고분자 액정 등의 기초 원료로서 각광 받고 있는 2,6-dimethylnaphthalene(2,6-DMNA)이 함유되어 있다. 본 연구는, LCO중에 함유된 2,6-DMNA의 분리, 정제를 위한 전처리조작으로서 LCO중에 함유된 dimethylnaphthalene(DMNA)이성체 혼합물의 농축을 추출-증류의 조합에 의해 실험적으로 검토했다. 또, LCO중에 함유된 DMNA이성체 혼합물의 농축에 대한 증류와 추출-증류의 조합을 비교, 검토하였다. Dimethylsulfoxide수용액을 용매로 사용한 회분병류 5회 평형추출로서 LCO중에 함유된 방향족 성분을 회수한 결과, 회수된 추출유중의 나프탈렌류 성분(탄소수 : 10-12)의 농도는 LCO중의 나프탈렌류 성분의 그것에 비해 높았으며, 나프탈렌류 성분의 수율은 탄소수가 작은 성분일수록 컸다. 5회 평형추출에 의한 DMNA이성체 혼합물의 회수율은 65wt%이었다. 추출유의 회분증류로서 얻어진 DMNA을 함유한 유출액을 재차 회분증류함으로서 60wt%의 고농도 DMNA이성체 혼합물을 함유한 유출액의 회수가 가능했다. LCO중에 함유된 DMNA이성체 혼합물의 농축에는 LCO의 직접증류보다 추출-증류의 조합이 더 효과적이었다.

• 대한토목학회논문집
• /
• 제42권5호
• /
• pp.741-749
• /
• 2022

달 영구음영지역에 얼음 형태의 물이 발견되면서 주요 우주국들은 로버 중심의 현장 탐사를 준비 중이다. 달 영구음영지역은 극지역 크레이터의 중심부로 태양광이 직접 도달하지 않지만, 크레이터 벽면으로부터 반사되는 태양광으로 인해 일정 수준의 저조도 환경이 유지되는 것으로 예상된다. 본 연구에서는 달 영구음영지역의 조도와 지형환경을 모사한 실내 테스트베드를 구축하여 모의 지형영상을 촬영하였다. 모의 영상을 대상으로 저조도 영상강화 기법(CLAHE, Dehaze, RetinexNet, GLADNet)을 적용하여 밝기값과 색상복원 효과를 분석하였고, 특징점 추출 및 정합 기법(SIFT, SURF, ORB, AKAZE)의 성능 향상을 분석하였다. 실험 결과 GLADNet과 Dehaze 영상 순으로 저조도 환경에 강인한 시인성 개선 효과를 보여주었다. 반면 특징점 검출 및 정합 기법은 Dehaze와 GLADNet 영상 순으로 성능이 향상됨을 확인하였고, 특히 ORB와 AKAZE의 성능이 크게 개선되었다. 달 탐사에서 로버 탑재 카메라는 3차원 지형정보구축과 지질학적 조사에 활용된다. 따라서 GLADNet은 토양 성분과 암석 종류 판별에 유용하고, Dehaze는 로버의 주행과 함께 3차원 지형정보 구축에 적합할 것으로 판단된다.

• Journal of Periodontal and Implant Science
• /
• 제26권3호
• /
• pp.735-751
• /
• 1996

An ultimate goal of periodontal therapy is to stop the disease process and to regenerate a functionally-oriented periodontium destroyed as a result of periodontal disease. The purpose of this study was to observe the effect of grafting granulation tissue obtained from extraction socket on the regeneration of horizontal furcation defect. Six dogs were used in this study. All mandibular first and third premolars were extracted. At 2, 3, and 5 days after extraction, tissues were obtained from extraction socket of 1 mongrel dog and examined by light microscope. Granulation tissue obtained at 5 days after extraction was chosen as the graft material. Five days later, horizontal furcation defects were created surgically at mandibular second and fourth premolars in the right and left side of the 5 beagle dogs. The entrance area of the artificially prepared "key hole" defects were about $3\;4mm^2$. By random selections, 2 exposed furcation defects were grafted with granulation tissue obtained from extraction socket as experimental group and 1 furcation defect was as control. The flaps were replaced to their original position and sutured with 4-0 chromic cat-gut. Three dogs were sacrificed 4 weeks and two dogs 8 weeks after surgery, and the prepared specimens were examined by light microscope. At 4 weeks, furcations were filled with epithelial lining and fibrous connective tissue infiltrated with chronic inflammatory cells. New bone formation was observed in all groups. Only experimental group showed new cementum formation. At 8 weeks, new cementum, functional arrangement of new PDL fiber, root resorption, and some ankylotic union of newly formed alveolar bone and root surface were observed in all groups. Experimental group showed that epithelial downgrowth was inhibited and new bone formation was more active compared to control. The success rate of the furcation defect healing was higher in experimental group than control. These results suggested that grafting of granulation tissue obtained from extraction socket which combined with reconstructive periodontal flap surgery may promote periodontal regeneration of horizontal furcation defect.

• Imaging Science in Dentistry
• /
• 제32권1호
• /
• pp.1-10
• /
• 2002

Purpose: To observe the histopathological changes following irradiation on the wound healing after tooth extraction in the rachitic rats. Materials and Methods: In order to carry out this study, the rats were divided into four groups: Group 1 (normal diet/non-irradiation group), Group 2 (normal diet/irradiation group), Group 3 (rachitogenic diet/non-irradiation group), and Group 4 (rachitogenic diet/irradiation group). Rachitic changes were induced with rachitogenic diet No. 2 (high calcium, low phosphorus, and Vitamin D deficient diet) for 5 weeks. After the extraction of both maxillary first molars of the rats in Group 2 and 4, the head and neck of the rats were irradiated with single absorbed dose of 10 Gy. The rats were sacrificed at the 1st, 5th, 10th, and 15th day after tooth extraction. The specimens including the extraction wound were sectioned, stained with the hematoxylin-eosin and Masson's trichrome method and examined under the light microscope. Results: In the Group 2, the amount of newly formed bone trabeculae on the periphery of extraction socket and osteoblastic activity were reduced. In the Group 3, epithelial fusion was not revealed on the 5th day after toothe extraction and growth rate of osteoid formation was reduced. In the Group 4, necrotized tissue at the outer surface of extraction socket and destructive changes on the alveolar bones were noted on the 10th day. Epithelial fusion was not revealed and large amounts of osteoclast were noted on alveolar bone on the 15th day. Conclusion: The healing process of wound after tooth extraction was retarded by irradiation and especially in the rachitic rats.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.870-877
• /
• 2018

Cyanex 272 shows the highest separation factor for the rare earth elements from hydrochloric acid solution among the organophosporus acidic extractants, D2EHPA and PC 88A. Solvent extraction of Tb(III) from weak hydrochloric acid solution with an initial pH 3 to 6 was compared with Cyanex 272, its mixture with Alamine 336, and ionic liquid with Aliquat 336. The solvent extraction reaction of Tb(III) using Cyanex 272 was the same as that of light rare earth elements. Synergism was observed for the extraction of Tb(III) by the mixture with Alamine 336 when the initial concentration ratio of Cyanex 272 to Alamine 336 was higher than 5. Use of the ionic liquid led to a great increase in the extraction percentage of Tb(III) from the same initial extraction conditions. While the equilibrium pH of the mixture was always lower than the initial pH, under some conditions extraction with the ionic liquid resulted in a higher equilibrium pH than the initial pH. The loading capacity of the mixture and the ionic liquid was the same and 2.6 times larger than that using Cyanex 272 alone. Ionic liquid was recommended as a suitable extractant for the extraction of Tb(III) from hydrochloric acid solution based on the ease of handling and higher extraction percentage.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.115-122
• /
• 2007

The purpose of this study is to extract design concepts, especially in relation to light, as a part of extracting design concepts in architectural interior design. This study consists of two steps. Firstly, appropriate design concepts are extracted from various design characteristics. Secondly, these concepts are classified in the frame of other components of architectural space, as well as in the frame of the plastic characteristics of light. Various design characteristics were analyzed, those of which relating to the plastic character of space, namely, visual phenomenon. As a result of the analysis, 32 concepts were extracted. These concepts, in the frame of other components of architectural space (space, form, structure, opening of space, material, color, inside & outside relationship), were classified, as well as In the frame of the plastic character of Light (transparency, perception, direction, ornament). As the results of this research, the suggested design concepts will be a study material, available to the interior designers as well as students who want to utilize the organized study concepts.