• Molecules and Cells
• /
• 제38권7호
• /
• pp.624-629
• /
• 2015

Since the emergence of proteomics methods, many proteins specific for renal cell carcinoma (RCC) have been identified. Despite their usefulness for the specific diagnosis of RCC, such proteins do not provide spatial information on the diseased tissue. Therefore, the identification of cancer-specific proteins that include information on their specific location is needed. Recently, matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) based imaging mass spectrometry (IMS) has emerged as a new tool for the analysis of spatial distribution as well as identification of either proteins or small molecules in tissues. In this report, surgical tissue sections of papillary RCC were analyzed using MALDI-IMS. Statistical analysis revealed several discriminative cancer-specific m/z-species between normal and diseased tissues. Among these m/z-species, two particular proteins, S100A11 and ferritin light chain, which are specific for papillary RCC cancer regions, were successfully identified using LC-MS/MS following protein extraction from independent RCC samples. The expressions of S100A11 and ferritin light chain were further validated by immunohistochemistry of human tissues and tissue microarrays (TMAs) of RCC. In conclusion, MALDI-IMS followed by LC-MS/MS analysis in human tissue identified that S100A11 and ferritin light chain are differentially expressed proteins in papillary RCC cancer regions.

• 한국식품영양학회지
• /
• 제23권1호
• /
• pp.23-29
• /
• 2010

Pigment concentrates with violet-red color and sweet taste were obtained from purple-fleshed sweet potato(PFSP) using ethyl alcohol and water. Extract from general potato(GP) were used as a control. The relative stability of PFSP pigment concentrate(PFSPPC) in a storage test over 15 days was confirmed in the order of dark > fluorescence > sun-light irradiation. The relative stability of GP pigment concentrate(GPPC) in a storage test over 15 days was confirmed in the order of sun-light > fluorescence > dark storage. The RRP of PFSPPC was higher than that of GPPC, but the color strength of GPPC was 1/2 that of PFSPPC. Treatment of PFSPPC with aluminum potassium sulfate(0.2~0.3%, w/w) best improved its stability. The improved RRPs of PFSPPC were 45.16~47.31% in sun light irradiation, 55.91~60.22% in fluorescence irradiation, and 76.34~75.97% in dark storage conditions. In substituting aluminum potassium sulfate for chitosan, an amount of 0.2~0.3%(w/w) was suitable, giving similar results in improving pigment stability for all concentrates tested. Also, freeze-dried PFSPPC powder was manufactured as a substitute for dextrin, and also as a substitute for chitosan to the extent of 0.25%(w/w). The results of storage stabilite for freeze-dried PFSPPC and GPPC powder over 15 days, irradiation were, PRRs of 74.47~89.36% and 61.54~76.92%, respectively. The stability improving effect of freeze dried PFSPPC powder was confirmed by the results of storage experiments at various conditions. The use of freeze-dried PFSPPC powder was therefore confirmed to be an effective treatment for general foods.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.146-146
• /
• 2011

The blue light emitting diode (LED) structure based on non-polar a-plane (11-20) GaN which was coated TiO2 nanoparticles using spin coating method was grown on r-plane (1-102) sapphire substrates to improve light extraction efficiency. We report on the emission and structural properties with temperature dependence of photoluminescence (PL) and x-ray rocking curves (XRC). From PL results at 13 K of undoped GaN samples, basal plane stacking fault (BSF) and near band edge (NBE) emission peak were observed at 3.434 eV and 3.484 eV, respectively. We also found the temperature-induced band-gap shrinkage, which was fitted well with empirical Varshini's equation. The PL intensity of TiO2 nanoparticles ?coated multiple quantum well (MQW) sample is decayed slower than that of no coating sample with increasing temperature. The anisotrophic strain and azimuth angle dependence in the films were shown from XRC results. The full width at half maximum (FWHM) along the GaN [11-20] and [1-100] directions were 564.9 arcsec and 490.8 arcsec, respectively. A small deviation of FWHM values at in-plane direction is attributed to uniform in-plane strain.

• Journal of Periodontal and Implant Science
• /
• 제30권4호
• /
• pp.793-803
• /
• 2000

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically self-curing glass-ionomer cement and light-curing glass-ionomer cement as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on maxillary third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were self-curing glassionomer cement and light-curing glassionomer cement. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. Results were as follows. 1. In all experiment group, there were not epithelial down growth and glass ionomer cement were encapsulated connective tissue. 2. In 4 weeks experiment I group slighly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, experiment groups I, II were encapsulated fine connective tissue. 4. Therefore glass-ionomer cement filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances were possible clinical methods and this technique is useful method for Maxillary furcation involvement.

• 한국식품과학회지
• /
• 제14권4호
• /
• pp.336-341
• /
• 1982

미역김의 제조와 이화학적 특성에 관한 계속 연구로 실시한 미역김의 조직화학적 특성 연구 결과는 다음과 같다. 미역잎은 표층, 피층, 속층으로 구성되어 있는데 미역김의 결합단면을 광학현미경으로 관찰한 결과 피층과 속층이 완전히 파괴되었고 표층세포끼리 결합되어 있었다. 미역김 절편을 $Na_2CO_3$용액 처리로 알진산을 추출한 후 광학현미경으로 검경한 결과 알진산이 추출된 결합부위는 periodic acid schiff reagent반응이 나타나지 않았으며, 한편 미역잎을 $Na_2CO_3$용액으로 미리 처리하여 알진산을 추출한 후에는 정상적인 미역김을 제조할 수 없었고 비정상적인 결합구조이었으므로 알진산이 미역김의 결합물질임을 확인할 수 있었다. 미역김의 결합부위를 전자현미경으로 관찰한 결과 알진산의 결합위치는 미역김의 표층세포막과 세포막사이임이 밝혀졌다. $Na_2CO_3$용액을 처리한 미역잎으로 제조한 비정상적인 미역김의 결합구조는 표층세포껍질로 인지되는 물질만이 서로 엉켜 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• 공업화학
• /
• 제21권2호
• /
• pp.148-153
• /
• 2010

본 연구는 녹차씨의 다양한 용도개발을 위한 기초자료를 얻기 위해 추출방법에 따른 녹차씨유의 물리화학적 특성 및 저장에 따른 안정성 테스트를 하였다. 녹차씨유의 수율은 SGS법을 이용할 경우 수율이 가장 높게 나타났고 비중은 추출방법에 관계없이 $0.91{\sim}0.94g/cm^{3}$ 범위였다. 명도는 SG법을 이용할 때가 가장 밝았으며, 적색도는 PRGS법을 이용할 경우가 가장 높게 나타났고 황색도의 경우는 SG법을 이용할 경우가 가장 높았다. 여러 지방산 중에서 C16 : 0, C18 : 1, 및 C18 : 2가 농도가 가장 높았다. 특히 C18 : 1 농도는 PGS (43.35%) > SGS (42.7%) > SG (39.0%)법의 순으로 다른 지방산에 비해 높은 수준이었다. 포화 지방산 농도는 SG (40.46%) > PGR (31.49%) > SGS (29.96%)법 순이었고 불포화 지방산의 경우는 SGS (69.9%) > PGR (68.39%) > SG (59.41%) 법 순이었다. SGS 및 SG법에 의해 추출된 녹차씨유의 산가는 저장기간이 10일 이후부터는 $6{\sim}8mgKOH/g$ 범위였다. 그러나 PGR법에 의해 추출된 녹차씨유의 산가는 저장기간과 비례하여 저장 60일 후에 49.3 mgKOH/g였다. SGS 및 SG법에 의해 추출된 녹차씨유의 과산화물가는 저장기간 10일부터 60일까지는 60~100 mEq/g 범위였다. 그러나 PGR법에 의해 추출된 녹차씨유의 과산화물가는 저장기간이 10일에서 30일로 증가할 경우 평균 60에서 240 mEq/g로 증가했다. 녹차씨유의 산패축진 작용도는 추출방법에 관계없이 $Fe^{2+}$ > $Cu^{2+}$ > $Cr^{2+}$ > $Zn^{2+}$ > $Ni^{2+}$의 순서로 나타났다. 특히 $Fe^{2+}$이 함유된 녹차씨유에 BHA을 첨가할 경우 과산화물가는 평균 60%가 감소하였고 $Cu^{2+}$의 경우는 평균 63%가 감소하였다. 이상의 결과는 녹차(Camellia sinensis) 씨유는 화장품, 세제, 그리고 식의약품 재료로써 가치가 있다고 사료된다.

• 대한소아치과학회지
• /
• 제30권3호
• /
• pp.348-353
• /
• 2003

정중 과잉치를 이른 시기에 발견하고 이를 신중하게 관리하는 것은 인접 영구 전치가 맹출하고 정상적인 위치로 자리 잡는데 미칠 수 있는 유해한 영향을 줄일 수 있다. 초기 혼합치열기에 있어 정중 이개가 정상적인 것으로 간주되지만 정중 과잉치의 존재를 이른 시기에 파악하고 이를 적절한 시기에 제거하는 것은 이어지는 영구 중절치의 자발적인 배열과 근접화를 가능하게 한다. 정중 이개의 관리에 있어서 가장 바람직한 선택은 주기적인 관찰이라 할 수 있다. 그러나 관찰 기간 동안에 정중 이개가 자발적으로 폐쇄되지 않을 때에는 교정 치료가 필요할 수 있다. 본 보고에서는 정중 과잉치로 인한 정중 이개의 폐쇄에서 정중 과잉치의 제거 이후 자발적 즉 생리적으로 폐쇄되는 증례(증례 1-3)와 함께 교정적 처치로 정중 폐쇄를 시행한 증례(증례 4)를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제25권3호
• /
• pp.279-285
• /
• 2009

본 연구의 목적은 인산칼슘제제인 $MBCP^{(R)}$, $Polybone^{(R)}$을 발치와에 이식 후 치유 양상을 조직학적으로 관찰하는 것이다. 비글견의 소구치를 발치 후 발치와에 골이식재를 이식하였으며, 3개월간의 치유기간을 거친 후 조직표본을 제작하여 현미경으로 치유 양상을 관찰하였다. $MBCP^{(R)}$, $Polybone^{(R)}$은 조직학적으로 비슷한 치유 양상을 보였으며 이물반응이나 염증 반응 없이 신생골 생성을 유도하여 정상적인 치유를 도모하였다. 치유된 조직의 조직 계측학적 평가에서 신생골 비율은 골이식재를 이식하지 않은 대조군이 34.5%, $MBCP^{(R)}$는 28.4%, $Polybone^{(R)}$은 23.8%였으며, 골이식재를 포함한 전체 mineralized tissue의 비율은 각각 34.5%, 42.9%, 37.3% 였다. 이상의 결과에서 $MBCP^{(R)}$, $Polybone^{(R)}$은 발치와에 사용할 골이식재로 가치가 있는 것으로 생각된다.

• 한국의류학회지
• /
• 제37권4호
• /
• pp.506-513
• /
• 2013

Rubia cordifolia L (Indian madder) contains red color purpurin (65-67%) and yellow color munjistin (10-12%) as well as nordamncanthal (9-10%). Purpurin is a traditional red dye. The purpose of this research is to increase the dyeability of silk and light fastness of dyed silk fabric. We dyed silk fabrics after pretreatment to remove the yellow component of madder using various solvents such as ethyl acetate, ethanol, methanol, chloroform, and acetone. The total K/S value was the highest in the case of chloroform and reflectance was the lowest at the red color region from 470nm to 530nm. Chloroform dissolved the yellow color of Rubia cordifolia; in addition, we found that the total K/S value increased and the ${\Delta}E$ value decreased by chloroform pretreatment for silk dyeing.