• 대한수학회보
• /
• 제51권2호
• /
• pp.511-517
• /
• 2014

In this paper, we prove that the 3-cycle is light in the family of 1-planar graphs with minimum vertex degree at least 5 and minimum edge degree at least 12. This generates a known result of Fabrici and Madaras [8].

• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.523-529
• /
• 2023

우수한 공간분해능을 달성하기 위해 소동물용 양전자방출단층촬영기기의 검출기에는 매우 작은 섬광 픽셀을 사용한다. 그러나 이러한 매우 작은 섬광 픽셀을 사용함으로써 배열의 가장자리 부분의 섬광 픽셀들이 평면 영상에서 중첩되는 현상이 발생할 수 있다. 이를 해결하기 위해 빛의 분포를 변화시킬 수 있는 광가이드를 사용하였다. 광가이드의 물질에 따라 빛이 퍼지는 경향이 달라지며, 이에 따라 어떠한 물질의 광가이드를 사용하느냐에 따라 겹침의 발생 유무가 달라진다. 본 연구에서는 기존의 유리 광가이드를 대신하여 섬광 픽셀과 동일한 물질의 광가이드를 적용한 검출기를 설계하였다. 섬광체 광가이드는 유리 광가이드에 비해 더 높은 굴절률을 지녀, 빛의 퍼지는 정도가 달라진다. 두 광가이드를 사용한 검출기의 가장자리 부분의 섬광 픽셀들의 분리 정도를 평가하기 위해 평면 영상을 획득하였다. 획득한 평면 영상의 가장자리 두 섬광 픽셀 영상의 공간분해능과 중심 간의 거리를 산출하여, 분리 정도를 평가하였다. 그 결과 섬광체 광가이드를 사용하였을 경우, 더 우수한 공간분해능을 보였으며, 섬광 픽셀들의 중심 간의 거리가 더 넓게 나타났다. 기존에 사용하는 유리 광가이드 대신에 섬광체 광가이드를 사용하여 검출기를 구성할 경우 더 작은 섬광 픽셀을 사용할 수 있으므로, 더 우수한 공간분해능을 확보할 수 있을 것이다.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.23-27
• /
• 2011

The correlation between the temporal and spatial variations of the elastic constant and temperature change was examined for a light guide plate (LGP) adopted in the edge-lit light-emitting-diode backlight for mobile applications, using the micro- Brillouin light scattering method. The velocity of sound and the elastic constant $C_{11}$ of an LGP made from bisphenol-A polycarbonate (PC) were investigated as functions of temperature, time, and position on the LGP. The temporal variation of $C_{11}$ exhibited an exponential decay, while the spatial variation of $C_{11}$ reflected the temperature distribution on the LGP. The glass transition temperature of the PC LGP was found to be located at $155^{\circ}C$. The result showed that systematic transformation between the elastic property and the temperature is possible and that the temperature distribution on the bulk LGP can be accurately probed via the present experiment method, without using any special temperature measurement equipment.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.571-579
• /
• 2019

가시광통신은 조명과 통신을 동시에 수행하므로, 데이터 전송과정에서 광전력의 변동으로 인하여 발생하는 플리커를 방지함과 동시에 조명제어 기능을 갖추는 것이 중요하다. 본 논문에서는 플리커를 방지하고 조명제어를 위하여 맨체스터코드를 사용하였다. 송신부에서는 맨체스터코드의 듀티율을 사용하여 LED의 조명을 제어하였고, 수신부에서는 RC-고역통과필터의 가장자리 스파이크 신호를 사용하여 인접된 잡음광을 차단하고 맨체스터코드를 복구하였다. 실험에서 LED 빛은 플리커가 없는 상태를 유지하였고, 맨체스터코드의 듀티율을 변경함으로써 평균 광전력을 CW LED 광의 약 8~68 % 의 범위에서 제어하였다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.8-12
• /
• 2016

In this paper, we theoretically and experimentally analyze the impact of speckle size of pseudo-thermal light source on ghost imaging. A larger size of speckle can bring improvements in SNR and visibility. At the same time, the edge blur of the retrieved image will become more serious. We also present a setup which can mitigate the edge blur of larger speckle while maintaining the advantages of higher SNR and visibility by changing the speckle size of the object beam with a concave lens.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.296-300
• /
• 1996

This paper presents 3D position estimation algorithm with the images of 2D vision sensors which issues Red Laser Slit light and recieves the line images. Since the sensor usually measures 2D position of corner(or edge) of a body and the measured point is not fixed in the body, the additional information of the corner(or edge) is used. That is, corner(or edge) line is straight and fixed in the body. For the body which moves in a plane, the Transformation matrix between the body coordinate and the reference coordinate is analytically found. For the 3D motion body, linearization technique and least mean squares method are used.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.111-123
• /
• 1996

In this paper, a new edge-based segmentation algorithm for range image using pseudo reflectance images (PRIs) is proposed. A model of pseudo reflectance which is useful in analyzing three dimensional scene and objects is introduced and then three PRIs are generated by the model. For generating three PRIs, bels and jain's differential window operator is selected and three different light source directions are determined. Three edge images are extracted from each PRI and a fused (logical ORing) edge image is constructed for the benefit of enhanced edge formation. The final segmentation results of the proposed algoritm are obtained after the processing of thinning, labeling and correcting erroeneous regions with the fused edge image. The good performance of edge detection and segmentation is confirmed via computer simulation with synthetic and real range images.

• 방사선산업학회지
• /
• 제11권3호
• /
• pp.157-165
• /
• 2017

In this paper, we calculate the light photons collection efficiency of large-volume plastic scintillation detector mainly used for radiation portal monitor (RPM). A Monte Carlo light photon transport code, DETECT2000, were used to quantitatively evaluate light collection efficiency of plastic scintillation detector. DETECT2000 calculated the placement of light collection efficiency based on the energy spectrum. We calculated the light collection efficiency relative to the position of the energy spectrum that proportional to the placement of the source. The $850{\times}285{\times}65mm^3$ size of polyvinyl toluene (PVT) scintillator was used for measurements. Through DETECT2000 simulation, the light collection efficiency of $5{\times}5$ arrays were calculated and verification was performed by comparing with experimentally measured. And then, the corrected MCNP simulation by applying the light collection efficiency in $21{\times}13$ arrays was compared and analyzed. Comparing the Monte Carlo simulation with measured results, it shows an average difference of 10.1% in $5{\times}5$ arrays. Particularly, about twice of the difference was found in the edge of first column, which coupled with PMT. In whole $5{\times}5$ array, the overall ratio was the same except for the first column. And then comparing the energy spectra of the $21{\times}13$ array with and without the light collection efficiency, it shows a difference of 6.69% in Compton edge area. The DETECT2000 based light collection efficiency simulation showed well agreement with the point source experiment. And comparing with measured energy spectra, we could compare the differences according to whether or not the light collection efficiency was applied. As a results, it is possible to increase the accuracy and reliability of Monte Carlo simulation results by pre-calculating the light collection efficiency according to the PVT geometry by using the DETECT2000.

• Journal of the Optical Society of Korea
• /
• 제11권4호
• /
• pp.173-176
• /
• 2007

We present a very simple and efficient bare-wafer inspection method using a knife-edge test. The wafer front surface and inner structures are inspected simultaneously. The wafer front surface is inspected visually using a knife-edge test while the inner structure is simultaneously inspected by a camera in the infrared region with a single white-light source. This paper presents a laboratory implementation of the test method with some experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.55.4-55
• /
• 2002

In the semiconductor fabrication, particle contamination is wide-spread and one of major causes to yield loss. Extensive testing has revealed that even careful handling of wafers during processing may cause photo-resist materials to flake off wafer edges. So, to remove the photo-resist at the outer 5mm of wafers, UV(Ultraviolet) rays are exposed. WEE (Wafer Edge Exposure) process station is the system that exposes the wafer edge as prespecified by controlling the positioning mechanism and maintaining the light intensity level In this work, WEE process station has been designed so as to significantly lower the amount of particle contamination which occurs even during the most r...