• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.345-351
• /
• 2017

A wind tunnel test for the scaled parachute models was performed to verify aerodynamic characteristics for practical usage of Korean low cost low altitude aerial delivery system. The cruciform shaped cargo parachute models for heavy and light weight were ejected into wind tunnel test section; and the drag forces acting on the models in steady condition were measured in accordance with velocity. Also, the maximum opening forces during inflation were obtained and captured by a high speed camera to analyze the inflation characteristics and evaluate the design of the low cost aerial delivery system. The results showed a reliable stability and met the design requirement of delivery operation system for R.O.K Air Force.

• 폴리머
• /
• 제36권2호
• /
• pp.149-154
• /
• 2012

생체적합성을 가진 키토산과 강력한 항산화제로 알려진 리포산을 합성하여 만든 양친매성 고분자를 이용하여 약물전달시스템으로서의 응용 가능성을 알아보았다. 수용액 상에서 자기조립의 성질을 가지는 양친매성 고분자는 나노입자를 형성하고 이 입자 안에 항암제로 널리 쓰이는 5-fluorouracil을 고체분산법을 이용하여 봉입하였다. 최적의 약물전달체를 얻기 위하여 키토산에 결합된 리포산의 비율을 조절하여 입자크기 및 약물봉입률을 비교하였다. DLS를 이용하여 측정한 나노입자는 약 250 nm 정도의 크기를 가졌고 그 봉입률은 10% 내외로 측정되었다. 42%의 리포산 치환율을 가지는 공중합체가 약물전달체로서 가장 우수한 성능을 보여주었다.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1079-1085
• /
• 2012

현재 전 세계의 많은 과학자들이 지속 가능한 에너지원을 찾기 위하여 많은 노력을 하고 있지만, 태양광에너지가 궁극적인 해답이 될 것으로 받아들여지고 있다. 이러한 광 에너지는 조명용, 발열용, 통신용 등으로 사용될 수 있으며, 심지어 최근에는 광에너지로 동작하는 광자구동 모터에 대한 연구결과도 나오고 있다. 본 논문에서는 이러한 광에너지를 광섬유를 통해 전송할 수 있는 기술에 대해 이론적인 분석을 수행하였다. 특히, 한 가닥의 광섬유에 여러 개의 코어(core)가 삽입된 멀티코어(multi-core) 광섬유를 이용한 광에너지 전송의 에너지 전송량에 대해 예측해 보았다. 본 논문의 분석 결과에 따르면, 한 가닥의 멀티코어 광섬유로 약 2 kW 의 광에너지 전송이 가능할 것으로 예측되었으며, 초고압선처럼 수 cm 의 직경으로 광섬유 다발을 묶을 경우에는 10 MW 이상의 광에너지 전송이 가능할 것으로 예측되었다. 이는 도체 전력선과 비교하여 절반수준의 에너지 전송량으로 충분한 경쟁력이 있을 것으로 생각된다.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.45-49
• /
• 2015

Process gases with vapor or liquid phase as well as gas phase may experience alteration in itself or be contaminated in the fluid pipe to the process chamber. And thus it result in as particles or defects on the substrates in semiconductor, LCD, LED manufacturing. Purifiers and filters are used for control of contamination. However, none of detection device is available in the delivery line. In this paper, we propose simple device with lighting and sensing in order to predict contamination of the fluid or the tube wall. For some general purpose gases, it showed constant voltage output regardless of the flow rates. But, the smoke and the moisture in the air lowered the figure due to its concentration. Numerical values for several solid and liquid media were obtained. And, the operating temperature tendency was investigated.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.667-675
• /
• 2016

Nanoemulsions are actively used in several applications for pharmaceutical, cosmetic and chemical industries. In this study, we propose the use of microfluidizer known as high pressure homogenizer to prepare lipid nanoemulsion as a potent cosmetic delivery carrier. The lipid nanoemulsions were prepared by O/W emulsion with hydrogenated lecithin and different type of oils. Effects of oil type on the stability of the lipid nanoemulsion were investigated with Dynamic Light Scattering (DLS) and Zeta-potential. Arbutin was used as model drug for transdermal administration through hairless mouse skin. Transdermal arbutin delivery using the lipid nanoemulsions was studied with HPLC method.

• Advances in materials Research
• /
• 제9권2호
• /
• pp.109-114
• /
• 2020

The purpose of this study was to observe the trend of compounds release from acrylic resin oral prosthesis when used for drug delivery as well as a restoration. In this study, 10 specimens of heat-cured polymethylmethacrylate material were prepared and loaded with methylene blue biological stain. The specimens were then submerged in vials with 5 ml distilled water for 24 hours. The extraction procedure continued for 4 days, each day the specimens were immersed in another 5 ml distilled water vial. All extracted solutions were analyzed by visible light spectroscopy for absorbance comparison. The statistical results showed that the absorbance values were significantly different in the first day of extraction than the following days. However, there was no statistical difference among the 2^nd, 3^rd and 4^th days of extraction. Biological stain loading to acrylic resin at the mixing stage, and then after extraction in distilled water, showed a burst release during the first day followed by a constant release during the following few days.

• 한국연초학회지
• /
• 제24권1호
• /
• pp.46-52
• /
• 2002

This study was carried out to investigate the transfer rate of I-menthol constituent into cigarette case and delivery rate to cigarette smoke. Test sample was used a light-type standard brand cigarette made in Korea. I-Menthol contents was measured according to A.O.A.C(1990) method by G.C and smoking conditions was a puff volume of 35$m\ell$ and 2.0s duration, taken once per minute to filter tipping paper plus 3mmwith 20 cigarettes. Migration rate of menthol into cigarette case had an interrelation with triacetin contents into filter and 6% triacetin level was most suitable. I-Menthol transferred to filter part from tobacco sheet by 20.2% in one month after cigarette manufacture, and the transfer was continued subsequently. Maximum menthol transfer in five months was 4.1% to foils and other packing materials and the loss outside of cigarette pack was also 3.9% below. The migration balance of menthol into cigarette pack and the delivery to cigarette smoke were the optimum condition when menthol was added at the ration of 30% in filter to 70% in the other parts into cigarette.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.646-655
• /
• 2007

To achieve targeted drug delivery for chemotherapy, a ligand-mediated nanoparticulate drug carrier was designed, which could identity a specific receptor on the surfaces of tumor cells. Biodegradable poly(ethylene oxide)/poly$({\varepsilon}-caprolactone)$ (PEG/PCL) amphiphilic block copolymers coupled to biotin ligands were synthesized with a variety of PEG/PCL compositions. Block copolymeric nanoparticles harboring the anticancer drug paclitaxel were prepared via micelle formation in aqueous solution. The size of the biotin-conjugated PEG/PCL nanoparticles was determined by light scattering measurements to be 88-118 nm, depending on the molecular weight of the block copolymer, and remained less than 120 nm even after paclitaxel loading. From an in vitro release study, biotin-conjugated PEG/PCL nanoparticles containing paclitaxel evidenced sustained release profiles of the drug with no initial burst effect. The biotin-conjugated PEG/PCL block copolymer itself evidenced no significant adverse effects on cell viability at $0.005-1.0{\mu}g/mL$ of nanoparticle suspension regardless of cell type (normal human fibroblasts and HeLa cells). However, biotin-conjugated PEG/PCL harboring paclitaxel evidenced a much higher cytotoxicity for cancer cells than was observed in the PEG/PCL nanoparticles without the biotin group. These results showed that the biotin-conjugated nanoparticles could improve the selective delivery of paclitaxel into cancer cells via interactions with over-expressed biotin receptors on the surfaces of cancer cells.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.105.2-105.2
• /
• 2016

For the rational design and facile fabrication of novel nanostructures, we present a new approach to generating arrays of three-dimensionally tunable nanostructures by exploiting light-matter interaction. To create controlled three-dimensional (3D) nanostructures, we utilize the 3D spatial distribution of light, induced by the light-matter interaction, within the matter to be patterned. As a systematic approach, we establish 3D modeling that integrates the physical and chemical effects of the photolithographic process. Based on a comprehensive analysis of structural formation process and nanoscale features through this modeling, we are able to realize three-dimensionally tunable nanostructures using facile photolithographic process. Here we first demonstrate the arrays of three-dimensionally controlled, stacked nanostructures with nanoscale, tunable layers. We expect that the promising strategy would open new opportunities to produce the arrays of tunable 3D nanostructures using more accessible and facile fabrication process for various biomedical applications ranging from biosensors to drug delivery devices.

• 한국응용과학기술학회지
• /
• 제15권4호
• /
• pp.11-20
• /
• 1998

The propagation of light radiation in a turbid medium is an important problem that confronts dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. Scattered light is measured as a function of the position(distance r, depth z) between the axis of the incident beam and the detection spot. Turbid sample yields a very forward-directed scattering pattern at short range of position from source to detector, whereas the thicker samples greatly attenuated the on-axis intensity at long range of position. The portions of scattered light reflected from or transmitted throughphantom depend upon internal reflectance and absorption properties of the phantom. Monte Carlo simulation method for modelling light transport in tissue is applied. It uses the photon is moved a distance where it may be scattered, absorbed, propagated, internally reflected, or transmitted out of tissue. The photon is repeatedly moved until it either escape from or is absorbed by the phantom. In order to obtain an optimum therapeutic ratio in phantom material, optimum control the light energy fluence rate is essential. This study is to discuss the physical mechanisms determining the actual light dose in phantom. Permitting a qualitative understanding of the measurements. It may also aid in designing the best model for laser medicine and application of medical engineering.