• 한국물환경학회지
• /
• 제25권1호
• /
• pp.84-89
• /
• 2009

Our nation's water resources remain susceptible to contamination by phenolic agrichemicals. These compounds can be toxic to a variety of organisms including humans. Their disposal is restricted in many countries with strict limits for acceptable concentrations in drinking water. Enzyme-mediated in situ stabilization has been advocated as an approach for the treatment of phenolic compounds in soils and groundwater. This study reports the development of a new approach to quantify the activity of the HRP enzyme in aqueous systems. The method is based on the coupled processes of energy transfer and enhanced chemiluminescence using a luminol-$H_2O_2$-HRP system. In this study, the effects of solution pH, ionic strength and aqueous concentrations of HRP, $H_2O_2$ and enhancer were evaluated on the p-iodophenol-enhanced, HRP-catalyzed chemiluminescence reaction intensity in Tris-HCl buffer. All assay components were found to affect the maximum chemiluminescene intensity. The calibration curve for HRP showed the linear relationship with maximum light intensity.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.213-221
• /
• 2013

We present the first BVRI CCD photometric observations of V345 Cas made on 22 nights during the observing seasons in 2007-2008. Our light curves, resembling those of EB-type binary stars, are analyzed with the 2003 version of the Wilson-Devinney binary code. The photometric study shows that V345 Cas is a typical semi-detached binary system with the primary star being about ${\Delta}T$ = 2400 K hotter, two times more massive, but only 17% larger than the secondary star being filled with it's Roche-lobe. The orbit has a relatively large inclination of about $88^{\circ}$. A cool spot on the secondary component is modeled to explain a small light curve asymmetry. Absolute dimensions and related radiometric parameters of the eclipsing pair are calculated and their evolutionary states are discussed with the HR diagrams of mass-radius and temperature-luminosity. A period analysis of all available times of minima, including our measurements, indicates that the orbital period may vary in a cyclical way, unfortunately the secondary period for the variation can not be uniquely determined because of lack of present timing data.

• 한국가축번식학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 1987

We describe a simple, solid-phase chemiluminescence immunoassay for the meausrement of serum T4. An immunoglobulin G fraction of antibody to thyroxine was passively absorbed onto the walls of polystyrene tubes. The labeled antigen was thyroxine-aminobutylethylisoluminol. After the bindings reaction (37$^{\circ}C$ for 1 hour), the solution is removed by aspiration and the antibody-bound fraction was washed once with buffer. Sodium hydroxide (5mol/1,200${mu}ell$) was added and the mixture incubated for 30 minutes at 6$0^{\circ}C$. Luminescence was initiated by oxidation of the label with micropeeroxidase-hydrogen peroxide and the signal of light emission was intergrated for 10 sec. The light yield was inversely proportional to the concentration of T4 in the standard or sample. An evaluation of the method gave the following values sensitivity of calibration curve 7.5$\pm$2.8 nmol/l (mean$\pm$SD). The intra-assay precision (CV%) was 8.9, 7.3 and 5.4. The inter-assay precision (CV%) was 10.2, 8.1 and 7.1. When seum samples were assayed for T4, the results obtained by solid-phase CIA and the conventional RIA agreed well(n=3.5, r=0.954).

• 분석과학
• /
• 제35권5호
• /
• pp.218-227
• /
• 2022

A simple and fast throughput flow injection (FI) system with a merging-zone technique was designed to determine ferrous and ferric in an aqueous solution. The method is based on the direct reaction of ferrous with a Bathophenanthroline reagent (Bphen) in acidic media. The forming red complex absorbs light at 533 nm. All conditions of the flow injection system were investigated. The analytical curve of ferrous was linear in the range of 0.07 to 4 mg/L with an r² value of 0.9968. The detection and quantification limits were 0.02 and 0.04 mg/L, respectively. The molar absorptivity and Sandell's sensitivity were 4.0577 × 10⁶ L/mol cm and 25 × 10^-5 ㎍/cm², respectively. The homemade valve was low-cost with high repeatability (n = 7) at an RSD of 1.26 % and zero dead volume. The values of the dispersion coefficient were 2.318, 2.022, and 1.636 for the concentrations of 0.2, 1, and 3 mg/L, respectively. The analysis throughput of the designed flow injection unit was 57 sample per hour.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.343-349
• /
• 2007

One of the useful technologies for light-weightening of components required in the automobile and machine industry is to use high strength materials. To improve material properties, the carbonizing treatment, nitrifying treatment, and shot-peening method are representatively applied. However, the shot-peening method is generally used to remove surface defect on steel and to improve the fatigue strength of the surface. Benefits of shot-peening are increasing resistance against fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this paper, the effect of shot-peening on the corrosion of SUP-9 steel immersed in a 3.5% NaCl solution and corrosion characteristics from heat treatment during the shot peening process has been investigated. The immersion test was performed on four kinds of specimens. Corrosion potential, the polarization curve, residual stress etc. Were analyzed from the experimental results.

• Journal of Astronomy and Space Sciences
• /
• 제17권1호
• /
• pp.19-32
• /
• 2000

접촉쌍성 VW Cep의 BV 측광관측을 1999년 4-5월 중 7일간 소백산천문대에서 수행하여 총 1,018개의 관측점을 얻었다. 이 관측 자료를 사용하여 광도곡선을 만들었고 이로부터 극심시각 HJD2454327.2282을 결정하였다. 우리의 광도곡선을 Wilson-Devinney 프로그램을 사용하여 분석하였다. 이때 모드 3을 적용하였고, $i,T_2,\Omega_1,q,L_1$을 수정인자로, 나머지 요소는 모두 고정인자로 사용하였다. WD 프로그램 초기 입력값으로 $T_1,a,V_r$은 Kaszas et al. (1998)의 값을, A는 Hendry et al. (1992)의 값을, X1는 van Hamme (1993)의 값을 사용하였다. 우리의 광도곡선해와 Kaszas et al. (1998)의 분광학적 해를 결합하여 VW Cep의 절대량$M_1=0.95M_\odot,M_2=0.33M_\odot,R_1=1.02R_\odot,R_2=0.66R_\odot$을 산출했다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.832-838
• /
• 1995

The purpose of this study was to evaluate the amount of marginal microleakage of 2 light curable GI cements(Fuji II LC & VariGlass), which contain some resin components. 4 volunteers kept on acrylic resin plates, which contained dentin disks with cavities filled with test materials for 2 weeks. The time when polishing was done(5 minutes and 24 hours after filling) and the use of protective agents were varied, so 8 groups with each 6 specimens were tested. After having specimens(disks with cavities filled with materials) penetrated with 1% Methylene Blue solution, specimens were stored in 40% nitric acid solution for 4 days to extract adsorbed dye material. Supernatants of centrifuged samples were diluted 5 times and Spectrophotometer was used to determine the degree of absorption. Dye concentration was calculated through the pre-obtained Linear Regression Curve. The results were as follows. 1. The best result was seen in groups (PF24, PV24) which were protected and polished 24 hours later and the opposite phenomenon was seen in groups(NF24, NV24) which were held without protection and polished 24 hours later. Groups polished S minutes later showed moderate leakage pattern. 2. Groups polished 5 minutes later showed similar leakage amount irrespective of using of protective agent. But statistically insignificant lower values were seen in VariGlass than in Fuji II LC groups, So It was considered that VariGlass may be more resistant to early moisture attack than Fuji II LC. 3. In groups polished 24 hours later, there was no significant difference between materials but was definitely significant difference according to the use of protective agent. If the cement in which polishing will be done 24 hours later, Protective agent should be used to cover the surface.

• 한국약용작물학회지
• /
• 제21권3호
• /
• pp.213-219
• /
• 2013

This study was carried out to find out the optimum method of preparation of indigo standard solution and its stability, and to investigate the indigo contents in Niram, blue dye extract, from a total of 7 indigo plants and 34 breeding lines of Persicaria tinctoria H. Gross. Proper solvent for indigo standard was dimethyl sulfoxide (DMSO), and appropriate concentration was 1 mg of indigo in 10 mL of DMSO. Absorbance value of UV/Vis Spectrophotometer at 620 nm of standard solution was changed decreasingly 12 hours after the preparation of standard solution irrespective of the storage conditions such as temperature and light. Average value of absorbance of 8-fold diluted standard solutions prepared daily during 16 days was $0.210{\pm}0.005$, indicating the powder of indigo compound was stable chemically. Calibration curve was made for quantitative analysis of indigo of 7 Niram samples, and indigo contents ranged from 0.69% to 18.76% showing relatively larger variation. Across all 34 breeding lines, the range of indigo content was from 7.9 mg to 56.4 mg per 100 g of fresh leaves, averaging 25.2 mg of indigo content and showing a 47.7% coefficient of variation.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.121-128
• /
• 2008

High strength 7xxx aluminum alloys have been applied to automotive bump back beam of the some limited model for light weight vehicle. The aluminum bump back beam is manufactured through extrusion, bending and welding. The residual stress given on these processes combines with the corrosive atmosphere on the road spreaded with corrosive chemicals to melt snow to occur the stress corrosion cracking. The composition of commercial 7xxx aluminum has Zn/Mg ratio about 3 and Cu over 2 wt% for better strength and stress corrosion cracking resistivity. But this composition isn't adequate for appling to the automotive bump back beam with high resistance to extrusion and bad weldability. In this study the composition of 7xxx aluminum alloy was modified to high Zn/Mg ratio and low Cu content for better extrusion and weldability. To estimate the resistivity against stress corrosion cracking of this aluminum alloy by slow strain rate test, the corrosion atmosphere and strain rate separate the stress corrosion cracking from conventional corrosion must be investigated. Using 0.6 Mol NaCl solution on slow strain rate test the stress corrosion cracking induced fracture was not observed. By adding 0.3% $H_2O_2$ and 0.6M $Na_2SO_4$ to 1M NaCl solution, the corrosion potential and current density of polarization curve moved to active potential and larger current density, and on the slow strain rate test the fracture energy in solution was lower than that in pre-exposure. These mean the stress corrosion cracking induced fracture can be estimated in this 1M NaCl + 0.3% $H_2O_2$ + 0.6M $Na_2SO_4$ solution. When the strain rate was below $2{\times}10^{-6}$, the stress corrosion cracking induced fracture start to be observed.

• Journal of Astronomy and Space Sciences
• /
• 제10권2호
• /
• pp.123-145
• /
• 1993

충북대학교 천문우주학과의 UBVRI 측광기가 부착된 20 cm 망원경을 이용하여 1988년 12월부터 1991년 3월 사이의 33일밤 동안 Algol을 광전측광 관측하여 총 3465점의 관측값을 얻었다. 이 관측값을 이용하여 UBVRI 광도곡선을 만들었고 5개의 극심시각 JDHel 2447898.0938, JDHel 2447908.1014, JDHel 2448265.1205, JDHel 2448288.0598, JDHel 2448275.146 을 결정하였다. 우리가 얻은 UBVRI 광도곡선을 동시에 Wilson-Devinney 방법으로 분석하여 측광학적 해를 구했다. 이 해로 부터 얻은 i= $82.{\circ}47$, q=0.227, $r_1$=0.2102, $r_2$=0.2512와 Hill et al.(1971)의 분광학적 해의 인수들을 이용하여 Algol A,B,C, 각각에 대한 질량에 반경을 $m_1$=3.36, $m_2$=0.76, $m_3$=1.6, $R_1$=2.97, $R_2$=0.76과 같이 구했다. 여기서 사용한 단위는 태양질량 단위와 태양반경 단위이다. 이러한 우리의 결과들은 Kim(1989)이 보고한 값들과 대체로 비슷하다. 우리의 해로 부터 은 5색의 $l_1$, $l_2$, $l_3$ 값들을 Planck 곡선에 fitting 시키는 방법에 의해 Algol C의 온도를 $T_3$=8800로, 그리고 $R_3$=$1.6R_\odot$을 유도했다. Algol A와 B의 배치 형태가 준접촉형인 것은 case B 질량 이동에 의해 생긴 결과로 믿어지며, 질량-반경동에 나타난 이들의 위치에 의하면 Algol B는 수소연소 단계에서도 상당히 진화된 상태에 있는 것으로 추정된다.로 추정된다.