• 디지털산업정보학회논문지
• /
• 제13권4호
• /
• pp.41-48
• /
• 2017

It is necessary to develop an LED traffic light lens having a snow removal function capable of clearly providing a traffic signal to the driver even when a traffic light is blurred due to heavy snow and wind in the winter season. This study is focused on the research and development of the traffic light lens in the process of developing the LED traffic light with the snow removal function. In the developed traffic light lens, instead of attaching the film heater, the coated nichrome wire was wound into a coil shape and inserted directly into the groove in the lens. The developed heater system facilitates the insertion of the heating wire with high elasticity into a curved lens and can provide a sufficient heat without deformation of the PC lens. The proposed traffic lights were tested in various external environments and the test results showed that complete snow removal is possible without tunnel effect.

• 한국안광학회지
• /
• 제18권3호
• /
• pp.297-304
• /
• 2013

목적: 광원에 따른 청광차단렌즈의 청광차단율과 청광비율을 조사하고, 이를 활용한 청광차단렌즈의 처방에 대하여 고찰하였다. 방법: 광원에 따른 청광차단렌즈의 청광차단율과 청광비율의 조사를 위해 UV-VIS 분광광도계를, 청광차단렌즈와 관련된 처방을 평가하는 기준으로 태양광에 대한 청광비율을 이용하였다. 결과: 렌즈의 청광차단율과 청광비율은 광원에 따라 다르게 나타났다. 모든 BLU 광원의 청광비율은 태양광($D_{65}$ 광원)의 청광비율보다 큰 것으로 확인되었다. 태양광의 청광비율과 렌즈 투과광의 청광비율을 통해 각 광원에 적합한 청광차단렌즈들을 선별할 수 있었다. 결론: 청광차단렌즈 처방에 있어서 렌즈의 청광차단율과 청광비율이 광원에 의존하므로 사용자의 광원에 대한 문진이 선행되어야 한다. 태양광의 청광비율에 기준한 렌즈 투과광의 청광비율은 청광차단렌즈의 처방과 관련된 하나의 평가 방법으로 유용하게 활용될 수 있다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.612-618
• /
• 2016

본 연구의 목적은 청색광 차단 렌즈에서 발생하는 미광이 상의 질에 미치는 영향에 대하여 알아보는 것이다. 이상적인 안경 렌즈, 내부 반사가 없는 무반사 안경 렌즈, 내부 반사가 있는 무반사 안경 렌즈, 그리고 내부 반사가 있는 청색광 차단 렌즈를 설계하고 광도 분포 및 미광 분포를 도출하였다. 설계된 안경 렌즈는 굴절능 0.00 D, 굴절률 1.56, 반지름 155.16 mm 인 메니스커스 렌즈이다. 청색광 차단 렌즈의 피크는 430~440 nm 영역 사이에 있으며, 반사율은 5%, 10%, 15%, 20%이 되도록 설계하였다. 분석 결과에 따르면 청색광 차단 렌즈의 반사율이 증가함에 따라 중심부의 광도의 세기는 감소하고 중심-주변부와 주변부의 미광의 세기는 증가하였다. 이러한 현상은 청색광 차단 렌즈의 반사율이 증가할수록 심화되는 것으로 나타났다. 청색광 차단 렌즈의 반사율 증가는 중심-주변부 및 주변부의 미광을 증가시켜 상의 질을 떨어뜨리므로 청색광 차단 렌즈에서의 반사율은 청색광 차단율 및 시감 투과율을 고려하여 시각적으로 불편함이 없는 수준에서 조절할 필요가 있다.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.1-7
• /
• 2012

Recently an optical diffusion of LED lamps has been studied actively. In this paper, the second lens applied to a cover of the LED lamp was analytically designed to having a wide angle distribution of light without diffuser characteristic by dispersing agent. In this process, We found a major factors that can help improve the performance of the lens. It is the refractive power of the lens, the Mie particle density of phosphor, and the arrangement of the LED. Through the final simulation, we can see the LED lamp is possible to get wide angle light distribution by proper source modeling and second lens designing. Also, we can see this simulated results are entirely consistent with measured data for light distribution. In this research, we present the shape of the second lens with wide angle distribution and derive the important factors for the second lens design.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• 한국재료학회지
• /
• 제28권8호
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• 한국정보전자통신기술학회논문지
• /
• 제1권2호
• /
• pp.21-25
• /
• 2008

A CCFL which commonly used in the back light units for the LCD, possess very high brightness hence, was widely used as a line light source. However, the use of CCFL, caused for several environmental concerns since it contain highly toxic mercury, gradually replaced into a LED. But the LED is a spot light source, the dark area occurs in the surface of the back light units. In this paper, we proposed the lens that can convert the spot light into the line light and it can remove the dark area in the surface of the back light units. The lens is composed with the light condensation part and the light guiding part. The conditions obtained will be helpful to plan an optimum structure for such preparation.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.260-268
• /
• 2020

Currently, it is usually a 3D scanner processing method as a laser method. However, the laser method has a disadvantage of slow scanning speed and poor precision. Although optical scanners are used as a method to compensate for these shortcomings, optical scanners are closely related to the distance and precision of the object, and have the disadvantage of being expensive. In this paper, 3D scanner using variable focus lens-based structured light module with improved measurement precision was designed to be high performance, low price, and usable in industrial fields. To this end, designed a telecentric optical system based on a variable focus lens and connected to the telecentric mechanism of the step motor and lens to adjust the focus of the variable lens. Designed a connection structure with optimized scalability of hardware circuits that configures a stepper motor to form a system with a built-in processor. In addition, by applying an algorithm that can simultaneously acquire high-resolution texture image and depth information and apply image synthesis technology and GPU-based high-speed structured light processing technology, it is also stable for changes to external light. We will designed and implemented for further improving high measurement precision.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.421-426
• /
• 2015

This paper presents a hybrid single optical system for an LED surgical light that combines the advantages of both lens- and reflector-type single optical systems. The proposed hybrid single optical system includes a lens in the center and the LED light originating from the lens is redirected using a reflector to achieve a high beam spread. Iterative optical software simulations are used to provide data for the design of the lens and reflector for a single optical system, and for a complex optical system for the LED light assembly. The resulting data is also used to fabricate a prototype system. Experiments using the prototype of the hybrid single optical system and a mock-up LED surgical light confirm the system's shadow dilution performance and its applicability to surgical operations.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.1-8
• /
• 2013

The study carried out in this dissertation focuses on the lens structure design and the light distribution for LED safety luminaires using COB type LED module. Lens structures for LED lights has been designed 1) to induce light diffusion by dual process of internal reflection and refraction, 2) to minimize the inherent LED lights' glittering, and 3) to have uniform brightness. The lens designed with the proposed structures function as diffusers for the divergence of the LED lights so that they form a wide angle of view and adjust the light distribution. We designed of lens with stable uniformity factor and average roughness using aspheric optics property. Finally we made the analysis data of the simulated data.