• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.51-54
• /
• 2002

Polymer EL devices of glass/ITO/PI/MEH-PPV/Al structure were fabricated using spin coating and the Ionized Cluster Beam deposition technique. PMDA-ODA type thin polyimide films which can be used as a impurity blocking layer of EL device were deposited by ICB. According to our previous results, the packing densities of polyimide films were subject to change and depend on their deposition condition. By inserting a Pl layer with various thickness and packing density, I-V characteristics and life time of the devices were investigated to determine the role of a interlayer. The blocking of impurity diffusion from ITO to luminescent layer were confirmed by XPS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.249-255
• /
• 2007

Under the situation of a fire, it is difficult for a rescue robot to use sensors such as vision sensor, ultrasonic sensor or laser distance sensor because of diffusion, refraction or block of light and sound by dense smoke. But, braille blocks that are installed for the visaully impaired at public places such as subway stations can be used as a map for autonomous mobile robot's localization and navigation. In this paper, we developed a laser sensor stan device which can detect braille blcoks in spite of dense smoke and integrated the device to the robot developed to carry out rescue mission in various hazardous disaster areas at KIST. We implemented MCL algorithm for robot's attitude estimation according to the scanned data and transformed a braille block map to a topological map and designed a nonlinear path tracking controller for autonomous navigation. From various simulations and experiments, we could verify that the developed laser sensor device and the proposed localization method are effective to autonomous tracking of braille blocks and the autonomous navigation robot system can be used for rescue under fire.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.680-684
• /
• 2018

We investigate the effect of light intensity and wavelength of a solar cell device using photoconductive atomic force microscopy(PC-AFM). A $POCl_3$ diffusion doping process is used to produce a p-n junction solar cell device based on a polySi wafer, and the electrical properties of prepared solar cells are measured using a solar cell simulator system. The measured open circuit voltage($V_{oc}$) is 0.59 V and the short circuit current($I_{sc}$) is 48.5 mA. Moreover, the values of the fill factors and efficiencies of the devices are 0.7 and approximately 13.6 %, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, is used for direct measurements of photoelectric characteristics in limited areas instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics are observed. Results obtained through PC-AFM are compared with the electric/optical characteristics data obtained through a solar simulator. The voltage($V_{PC-AFM}$) at which the current is 0 A in the I-V characteristic curves increases sharply up to $18W/m^2$, peaking and slowly falling as light intensity increases. Here, $V_{PC-AFM}$ at $18W/m^2$ is 0.29 V, which corresponds to 59 % of the average $V_{oc}$ value, as measured with the solar simulator. Furthermore, while the light wavelength increases from 300 nm to 1,100 nm, the external quantum efficiency(EQE) and results from PC-AFM show similar trends at the macro scale but reveal different results in several sections, indicating the need for detailed analysis and improvement in the future.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1489-1490
• /
• 2011

The $O_2$ plasma treatment is used as improvement of ITO roughness glass for organic light-emitting diodes and organic photovoltaic cells. This study examined the effect of the electrical properties of OLED according to variation of $O_2$ plasma power. In experiment, we found that the electrical characteristics of device are excellent when the power of $O_2$ plasma is 250 W. And when the power of $O_2$ plasma increases over 250 W, the electrical properties were getting worse. $O_2$ plasma treatment not only prevents the diffusion of indium, a metal constituent, to an organic layer but also plays a significant role as improvement of ITO roughness. By considering organic light-emitting diodes treating $O_2$ plasma, it could contribute to the improvement of the efficiency of the device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1437-1439
• /
• 2007

We fabricated white organic light emitting device (WOLED) with the layered fluorescent blue material and phosphorescent green/red dye-doped materials. Addition of the non-doped phosphorescent host material between the fluorescent and phosphorescent light emitting layers provided the result of broadband white spectrum, with improved balance, higher efficiency, and lower power consumption. In our devices, there was no need of exciton-blocking layer between the each emission layer for the further confinement of the diffusion of excitons.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.512-515
• /
• 2009

We have fabricated blue phosphorescent organic light emitting diodes (PHOLEDs) using a 3,5'-N,N'-dicarbazole-benzene (mCP) host and iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$] picolinate (Flrpic) guest materials, The Flrpic was partially doped into the mCP host layer, for investigating recombination zone, current efficiency, and emission characteristics of the blue PHOLEDs. The recombination of electrons and holes takes place inside the mCP layer adjacent to the mCP/hole blocking layer interface. The best current efficiency was obtained in a device with an emission layer structure of mCP (10 nm)/mCP:Flrpic (20 nm, 10%). The high current efficiency in this device was attributed to the confinement of Ffrpic triplet excitons by the undoped mCP layer with high triplet energy, which blocks diffusion of Ffrpic excitons to the adjacent hole transport layer with a lower triplet energy.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.6
• /
• pp.15-24
• /
• 2006

Recently, the importance of the area efficient implementation of cryptographic algorithm for the portable device is increasing. Previous ARIA(Academy, Research Institute, Agency) implementation styles that usually concentrate upon speed, we not suitable for mobile devices in area and power aspects. Thus in this paper, we present an area efficient AR processor which use 32-bit architecture. Using new implementation technique of diffusion layer, the proposed processor has 11301 gates chip area. For 128-bit master key, the ARIA processor needs 87 clock cycles to generate initial round keys, n8 clock cycles to encrypt, and 256 clock cycles to decrypt a 128-bit block of data. Also the processor supports 192-bit and 256-bit master keys. These performances are 7% in area and 13% in speed improved results from previous cases.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.160-163
• /
• 2013

We investigated the effect of light intensity and wavelength of a solar cell device by using photoconductive atomic force microscopy (PC-AFM). The $POCl_3$ diffusion doping process was used to produce a p-n junction solar cell device based on a Poly-Si wafer and the electrical properties of prepared solar cells were measured using a solar cell simulator system. The measured open circuit voltage ($V_{oc}$) is 0.59 V and the short circuit current ($I_{sc}$) is 48.5 mA. Also, the values of the fill factors and efficiencies of the devices are 0.7% and approximately 13.6%, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, was used for direct measurements of photoelectric characteristics in local instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics were observed. Results obtained through PC-AFM were compared with the electric/optical characteristics data obtained through a solar simulator. The voltage ($V_{PC-AFM}$) at which the current was 0 A in the I-V characteristic curves increased sharply up to 1.8 $mW/cm^2$, peaking and slowly falling as light intensity increased. Here, $V_{PC-AFM}$ at 1.8 $mW/cm^2$ was 0.29 V, which corresponds to 59% of the average $V_{oc}$ value, as measured with the solar simulator. Also, while light wavelength was increased from 300 nm to 1,100 nm, the external quantum efficiency (EQE) and results from PC-AFM showed similar trends at the macro scale, but returned different results in several sections, indicating the need for detailed analysis and improvement in the future.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.507-519
• /
• 2015

Along with the rapid diffusion of smart devices, smart learning has been taking place as a main pedagogy in education. Under these drastic changing circumstances, social presence and interaction between learners have been highlighted as key factors in educational research. In this light of rising importance, this study examined the effects of modality and smart device on users' perceived social presence and interaction experience in a smart learning environment. It conducted 2(text based interface vs. audio/video based interface) by 2(smartphone vs. tablet PC) between-subjects experiment. 80 participants were systematically recruited and randomly assigned to four conditions. The findings showed that social presence was higher in audio/video based interface condition than in text based interface condition. Modality also had a positive effect on learner's interaction experience. On the other hand, the effect of smart device is found to be statistically insignificant. Instead, interaction effect existed between modality and device on social presence. The result of this study suggests that the modality and characteristics of device should be considered seriously when designing interface of smart learning contents. The findings in this study provide future studies with heuristic implications by highlighting users' perceived cognition and experience.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.377-382
• /
• 2014

We have investigated the effects of spacer layer inserted between blue and red doped emission layers on the emission and efficiency characteristics of phosphorescent OLEDs. N,N'-di-carbazolyl-3,5-benzene (mCP) was used as a host layer. Iridium(III)bis[(4,6-di-fluorophenyl)- pyridinato-N,$C^2$']picolinate (FIrpic) and tris(1-phenyl-isoquinolinato-$C^2$,N)iridium(III) [Ir(piq)3] were used as blue and red dopants, respectively. The emission layer structure was mCP (1-x) nm/mCP:$Ir(piq)_3$ (5 nm, 10%)/mCP (x nm)/mCP:FIrpic (5 nm, 10%). The thickness of mCP spacer layer was varied from 0 to 15 nm. The emission from $Ir(piq)_3$ and the efficiency of the device were dominated by energy transfer from mCP host and FIrpic molecules, and by diffusion of mCP host triplet excitons.