• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.992-996
• /
• 2004

Small electric motors in an automobile perform various tasks such as engine cooling, pumping, and in heating, ventilating, and air-conditioning (HVAC) system. At present, most of dc motors are supplied by 12V or 24V batteries. However, DC motors surfer from lack of efficiency, low life cycles and unreliability. Therefore, there is a growing interest in substituting DC motors for advanced AC motors including switched reluctance motors. Although there are several other forms SRM converters, they are either unsatisfactory to the control performance or unsuitable for the 12V-battery powered 3-phase SRM drives. Taking into account the requirement for effective operation and simplicity structure of converter in the limited internal environment of automobiles, the author inclines toward selecting the modified C-dump converter as well as the energy efficient C-dump converter. This is so that more economical and efficient converter topology in automobile industries can be utilized. This paper describes the foundation for the design and development of a 12V-250W-3000rpm SRM drives for automobiles. Furthermore, complete circuit, computer simulation and experiment results are presented to verify the performance of the C-dump converters.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.377-380
• /
• 2005

In this paper, accelerated stress test(AST) for Magnetic Switch (MS) are applied to assure specified reliability of the products. Magnetic contactor that functions with over-current relay is called MS. Magnetic contactor closes and opens the motor load with ON/OFF switch of electronic contactor. It is also used for protecting and controlling the load. Magnetic contactor detects the over-current flow in the load with a over-current relay and disconnects the load by opening its control power. In this study, AST for product assembly are developed in order to improve the weak point so that increase the product reliability. Also we will show the basic information for the accelerated life test(ALT). The proposed AST results and procedures may be extended and applied to testing similar kinds of products to reduce test times and costs of the tests remarkably. Finally the results of this study will contribute to improving reliability of products and strengthening competitiveness of our products in the world markets.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.101-114
• /
• 2018

Several different approaches and mechanisms are introduced to solve the UAV path planning problem. In this paper, we designed and implemented an agent-based simulation software using the Repast platform and Java Genetic Algorithm Package to examine an evolutionary path planning method by implementing and testing within the Repast environment. The paper demonstrates the life-cycle of an agent-based simulation software engineering project while providing a documentation strategy that allows specifying autonomous, adaptive, and interactive software entities in a Multi-Agent System. The study demonstrates how evolutionary path planning can be introduced to improve cognitive agent capabilities within an agent-based simulation environment.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.35-41
• /
• 2011

Recently, board level solder joint reliability performance of IC packages during drop impact becomes a great concern to semiconductor and electronic product manufacturers. The handheld electronic products are prone to being dropped during their useful service life because of their size and weight. The IC packages are susceptible to solder joint failures, induced by a combination of printed circuit board (PCB) bending and mechanical shock during impact. The board level drop testing is an effective method to characterize the solder joint reliability performance of miniature handheld products. In this paper, applying the JEDEC (JESD22-B111) standard present a finite element modeling of the FBGA. The simulation results revealed that maximum stress was located at the outermost solder ball in the PCB or IC package side, which consisted well with the location of crack initiation observed in the failure analysis after drop reliability tests.

• Corrosion Science and Technology
• /
• v.8 no.3
• /
• pp.116-118
• /
• 2009

Korea Institute of Construction Materials founded Seosan Outdoor Exposure Test Site 2005 at Korea, which is a part of Worldwide Exposure Network (WEN). To evaluate the test site along with other exposure test sites, three different types of paints have been under real time weathering conditions at three major weathering test facilities around the world. Using these test specimens several spectroscopic experiments along with physical tests have been performed. Also acceleration tests have been performed using the same paints. The correlation of weathered paints among three different test facilities and accelerated test results has been compared. From the results the reliability of Seosan Weathering Test Facility and reasonable life time prediction tests are discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.307-312
• /
• 2015

The sandwich panel is commonly used domestically because it's less costly and easier to handle. But fires have frequently occurred in buildings employing sandwich panels, such as the fires in Eecheon cold storage and in Gwangju Pyungdong industrial zone. Sandwich panels with steel plates on their surface prevent fire water from penetrating to the fire source, which makes it difficult to extinguish a fire in a timely manner. Toxic gas generated from some insulation material leads to serious loss of life and property. This study is intended to develop an extinguishing system for sandwich panels, thereby reducing the fire risk. Fire water and volume were determined in the wake of the study on the structure of a sandwich panel extinguishing system, and improvement and testing of the fire characteristics of the sandwich panel. Based on such study and test, a fire model test was conducted. Consequently, the sandwich panel with extinguishing system was proven to have a reduced fire risk, compared to traditional or fire retardant panels.

• Journal of Information Technology Applications and Management
• /
• v.23 no.4
• /
• pp.117-125
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure non-homogeneous Poisson process software reliability models, the failure occurrence rates per fault. can be presented constant, monotonic increasing or monotonic decreasing pattern. In this paper, the reliability software cost model considering decreasing intensity function was studied in the software product testing process. The decreasing intensity function that can be widely used in the field of reliability using power law process, log-linear processes and Musal-Okumoto process were studied and the parameter estimation method was used for maximum likelihood estimation. In this paper, from the software model analysis, we was compared by applying a software failure interval failure data considering the decreasing intensity function The decreasing intensity function model is also efficient in terms of reliability in the arena of the conservative model can be used as an alternating model can be established. From this paper, the software developers have to consider life distribution by preceding information of the software to classify failure modes which can be gifted to support.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.9-14
• /
• 2008

Ubiquitous implementation of indoor location-based technology is recognized that one of the important elements of the technology. Specifically, the hospital management of patients, the silver-town management, the implementation of the smart home for the indoors rather than outdoors in a range of broadband users for location-aware technology is needed. This paper in wireless devices with an indoor location awareness shows about the system's technical design and implementation. Location-based technology for wireless LAN users aware of the strength of radio signals (Received Signal Strength Indication, RSSI) using trilateration. Topographic mapping system will be implemented wireless devices and servers, Access Point (AP), which is the system's development and testing throughout the physical environment to determine the potential for real-life applications.

• Journal of Home Health Care Nursing
• /
• v.10 no.2
• /
• pp.141-147
• /
• 2003

The purpose of this study was to develop and apply a Web-based Nursing Education & Instruction Program to help the clinical nurses improving their knowledge and skills of ostomy care. This program was developed in three different steps: analysis. design. and development. The results of the study were as follows: The analysis step was designed to select the study contents for effective and easy educationthrough the analyses of specialized books. This surveyed and analyzed study contents were categorized into five different sections. Introduction. ostomy classification. ostomy management. elimination management. and life style. After that each section describes necessary information of each category. In the design step. the image files used in this program were created using Adobe Photoshop 6.0. and HTML files were designed and developed using Namo Editor 5.0. In the development step. the developed program was published into Web using FTP (File Transfer Protocol) and then finalized after trial operation for testing of real users. In addition. this Web-based Nursing Education & Instruction Program will be used as excellentand effective tool for continuous and lifelong education in nursingfield. In this study. computer-aided education program was developed for ostomy management and managed at the Web-Server (http://hshong.knu.ac.kr/ostomy) in order to help nurses real-time education in clinical field by this program.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.3-10
• /
• 2012

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. When correcting or modifying the software, finite failure non-homogeneous Poisson process model, considering learning factor, presented and propose release policies of the life distribution, log linear type model which used to an area of reliability because of various shape and scale parameter. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, the parameters estimation using maximum likelihood estimation of failure time data, make out estimating software optimal release time.