• KIEAE Journal
• /
• 제17권5호
• /
• pp.51-59
• /
• 2017

Purpose: This study aims to set up the classification system for providing infill information and draw detailed infill information required by suppliers, thereby promoting the revitalization of long-life housing and utilizing such information as preliminary data for establishing web system, on which infill information required by users in the long-life housing design process are available. Method: For the method of study, the infill information classification system and detailed information were drawn through the analysis of existing building material information systems; and the survey targeting working-level personnel was carried out in order to verify the drawn information system. The results of this study can be summarized as follows. First, the hierarchical classification system (scheme) was selected by quoting the classification system by material type as infill type, after analyzing existing DB information systems and drawing the hierarchical classification system for infill. Second, the comparative analysis between infill was available to users for the detailed infill information of long-life housing, and the essential information and general information were selected for differentiating information. Results: First, the hierarchical classification system (scheme) was selected by quoting the classification system by material type as infill type, after analyzing existing DB information systems and drawing the hierarchical classification system for infill. Second, the comparative analysis between infill was available to users for the detailed infill information of long-life housing, and the essential information and general information were selected for differentiating information. Third, only approximately 30% of the survey respondents recognized the infill of long-life housing, but they did not recognize its difference from existing building materials. Fourth, through the analysis of paths to obtain infill information of long-life housing, it was confirmed that infill information was obtained mostly through books and research papers regarding long-life housing, followed by the existing information systems. The significance of the study lies in that it is differentiated from the previous information system as the information system specialized in the infill of long-life housing was established, and can be used as a measure to revitalize long-life housing market.

• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.957-967
• /
• 2013

건설사업의 기획, 설계, 시공, 유지관리 등 생애주기 동안 방대한 분량의 전자도면이 생성되고 있으나, 비표준화 도면의 작성 및 유통으로 건설 주체 간 의사교환, 각 사업단계별 도면의 재활용 및 유지관리에 어려움을 겪고 있다. 건설분야 전자도면의 작성표준을 제시하는 건설CALS/EC 전자도면 작성표준의 특징은 선(線) 형태의 도로, 하천 및 철도분야와 단위 건축물 중심의 작성표준 체계로 구성되어 표준에 따른 전자도면 작성이 가능하다. 이에 반하여, 항만, 택지 및 부지 등과 같이 다중의 시설이 복합적으로 면(面)형태로 구성된 건설대상에 적용하기에 어려움이 있다. 특히 항만시설의 경우 일정한 연안지역에 배치된 복수 항의 목적에 따른 복합적인 부두, 시설 등으로 구성된다. 또한 배후부지와 같은 택지개념이 포함되어 있으며, 다수의 토목시설, 건축시설 및 항만 전용 시설 등으로 복합 구성되어 기존의 전자도면 작성표준의 활용이 어려운 실정이다. 이에 본 논문에서는 항만분야 수용을 위한 전자도면 작성표준의 확장 개발연구를 수행하며, 개발을 통해 도면정보관련 정보화 효율을 극대화하고, 궁극적으로 건설분야 설계정보의 원활한 정보교환이 가능하도록 하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.412-419
• /
• 2003

The most product is manufactured by mould in usual life. From drawing to manufacturing is to be automatically. But inspection is handwork usually. An alternative idea of this problem is reverse engineering. In this study, press forming is measured by 3D non-contact coordinate measuring machine and problem will be analyzed by comparing with 3D data Through the study, it will achieve improvement of press mould process.

• 오토저널
• /
• 제12권1호
• /
• pp.20-25
• /
• 1990

The design of a power transmission shaft which has the limited life under cumulative damage and various mean loads was made in consideration of shaft stiffness and shape determination. All procedures were programmed so that one can see the result by connecting to graphic terminal. The diameters of designed shaft are in good agreement with those of a commercial shaft which is manufactured according to the imported design drawing sheets.

• Mycobiology
• /
• 제49권3호
• /
• pp.249-257
• /
• 2021

Plants pollination are conducted through various pollinators such as wind, animals, and insects. Recently, the necessity for artificial pollination is drawing attention as the proportion of natural pollinators involved is decreasing over the years. Likewise, the trade in pollen for artificial pollination is also increasing worldwide. Through these imported pollens, many unknown microorganisms can flow from foreign countries. Among them, spores of various fungi present in the particles of pollen can be dispersed throughout the orchard. Therefore, in this study, the composition of fungal communities in imported pollen was revealed, and potential ecological characteristics of the fungi were investigated in four types of imported pollen. Top 10 operational taxonomic unit (OTU) of fungi were ranked among the following groups: Alternaria sp., Cladosporium sp., and Didymella glomerata which belong to many pathogenic species. Through FUNGuild analysis, the proportion of OTUs, which is assumed to be potentially plant pathogens, was higher than 50%, except for apple pollen in 2018. Based on this study of fungal structure, this information can suggest the direction of the pollen quarantine process and contribute to fungal biology in pollen

• 미래기술융합논문지
• /
• 제3권3호
• /
• pp.29-35
• /
• 2024

선(線)의 역사를 보면 인류 문명의 시작과 함께 선은 종교적, 주술적 의미나 기록을 남기기 위해 동굴 벽이나 바위 표면에 새겨졌다. 시대가 변하면서 문자가 발명되었고, 이는 의사 표현과 기록의 수단으로 사용 되었으며, 회화에도 큰 영향을 주었다. 동양에서는 '무위자연(無爲自然)' 사상에 따라 자연을 빌어 선으로 자신 뜻을 화폭에 담았으며, 그림을 그리기 전이나 후에 자신의 심상을 화폭에 적기도 하였다. 선을 단순한 경계선이 아니라 대상의 생명감을 불러일으키는 기운의 현현(顯現)으로 여겨졌다. 하나의 선이 그어진다는 것은 우주 공간 속에 새롭게 태어나는 생명 최초의 작용으로 간주 되었다. 선 자체는 공간의 깊이와 표현 요소를 함축하고 있다. 많은 작가들이 문헌에 나와 있는 이론을 바탕으로 선을 시대에 맞는 감각과 재료를 사용해 발전시켜 왔다. 본 연구는 기록된 문헌과 자료를 통해 선의 개념과 동서양의 선묘적(線描的) 특성을 연구하고, 현대적 표현 방법으로 선의 중첩성을 활용하여 작품을 연구하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.269-273
• /
• 2003

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2001

This paper describes a research work of developing system for conceptual die design system for Fine blanking. The method of approaching to the system is based on the knowledge-based rules. Knowledge for the system is formulated from experimental results and the empirical knowledge of field experts. This system has been written in VisualLISP on the AutoCAD using a personal computer and in Microsoft Visual Basic ver.6.0. Transference of data is accomplished by DXF (Drawing Exchange Format) method. This system consists of six modules, which are cognition of a drawing, cognition of shear length, calculation of shear force, materials properties database, determination of degree of difficulty of the product, determination of approximate life of punch and die modules. Results carried out in each module will provide efficiency to the designer and the manufacturer of die for Fine blanking. But the main focus of this system is the design of die for Fine blanking in the level of general concept. In order to use powerful tool in this field, developed system will be studied continuously.

• 가정과삶의질연구
• /
• 제21권5호
• /
• pp.109-120
• /
• 2003

The purpose of this study was to evaluate the effectiveness of a group art therapy program on the psychological well-being of children who have experienced domestic violence. The therapy program was designed to enhance self-esteem and reduce anxiety for these children. The participants of this study included seven elementary school students and five junior high school students. The therapy program consisted of thirteen sessions that were held between September 25, 2002 and December 17, 2002. Each session lasted approximately 100 minutes. The effectiveness of this program was evaluated by a pretest and a post-test. The instruments used in the tests were the Anxiety Scale and Self-Esteem Scale. In addition, HND (Here and Now Drawing) was adopted for qualitative evaluation. The data were analyzed by paired t-tests. The results show the following: First, the group art therapy program was effective in enhancing the children's self-esteem and in reducing their anxiety. Second, there was a qualitative change in children's HND (Here and Now Drawing) after the therapy program, which proves that the group art therapy was effective.

• 소성∙가공
• /
• 제13권1호
• /
• pp.84-89
• /
• 2004

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.