• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.111-133
• /
• 2015

This study was carried out to survey the vascular plants of Baekdudaegan Arboretum area. The results are as follows. The numbers of flora in this study area were summarized as 655 taxa including 95 families, 332 genera, 567 species, 5 subspecies, 72 varieties and 11 formas. The rare plants were 17 taxa including Parasenecio firmus, Rhododendron micranthum, Iris odaesanensis, Lysimachia coreana and so forth. The Korean endemic plants were 16 taxa including Weigela subsessilis, Heloniopsis koreana, Salix koriyanagi, Vicia chosenensis and so forth. Plants Adaptable to Climate Change were Northern plants 18 species, Southern plants 2 species, endemic plants 10 species. The naturalized plants were 44 taxa and ratios of naturalized index and urbanization index were estimated Core area 10.2% and 4.9%, Mt. Munsu 4.9% and 2.3% and Mt. Okseok 5.5% and 2.6%. The floristic regional indicator plants found in this area were 3taxa(2.5%) of grade V, 12taxa(11.0%) of grade IV, 22taxa(20.2%) of grade III, 35taxa(32.1%) of grade II. In life forms, hemicryptophytes were The most dominant. Next was a Therophytes. In addition, 492 taxa were categorized by usage into 8 groups, as follows: Edible 239taxa(36.5%), Fiber 10taxa(1.5%), Industrial 1taxon(0.2%), Miscellaneous 183taxa(27.9%), Ornamental 65taxa(9.9%), Pasturing 259taxa(39.5%), Siscellaneousg 14taxa(2.1%) and Timer 21taxa(3.2%).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3472-3480
• /
• 2010

The Clustering technology of Energy efficiency wireless sensor network gets the energy efficiency by reducing the number of communication between sensor nodes and sink node. In this paper, First analyzed on the clustering technique of the distributed clustering protocol routing scheme LEACH (Low Energy Adaptive Clustering Hierarchy) and HEED (Hybrid, Energy-Efficient Distributed Clustering Approach), and based on this, new energy-efficient clustering technique is proposed for the cause the maximum delay of dead nodes and to increase the lifetime of the network. In the proposed method, the cluster head is elect the optimal efficiency node based on the residual energy information of each member node and located information between sink node and cluster node, and elected a node in the cluster head since the data transfer process from the data been sent to the sink node to form a network by sending the energy consumption of individual nodes evenly to increase the network's entire life is the purpose of this study. To verify the performance of the proposed method through simulation and compared with existing clustering techniques. As a result, compared to the existing method of the network life cycle is approximately 5-10% improvement could be confirmed.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.615-626
• /
• 2006

The natural resources and material life-cycle include all human activities related to resources and material extraction, transportation, processing, use, recovery and disposal. Sustainable material management (SMM) is an integrated set of policy approaches targeted on economic agents throughout the material life-cycles and designed to result in economically efficient and environmentally effective material use. The material flows of industrial mineral, ores and fossil fuels have also long been a focal area for environmental policies because of the high environmental pressures associated with extraction, processing, consumption, and final disposal of these materials. OECD work on material flow is to improve the quantitative and analytical knowledge bases about natural resource and material flows within and among countries, so as to better understand the importance of material resources in member countries' economies. In several EU Member States, material flow accounts are part of official statistics. Material flow analysis (MFA) is a valuation method which assesses the efficiency of use of materials using information from material flow accounting. Material flow analysis helps to identify waste of natural resources and other materials in the economy which would otherwise go unnoticed in conventional economic monitoring systems. Resource use and resource efficiency has emerged as a major issue for long-term sustainability and environmental policy.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.1
• /
• pp.32-41
• /
• 2019

Objective : The purpose of this study is to develop a personal health record(PHR) application of atopic dermatitis in Korean Medicine(KM). Methods : We have identified the items necessary to provide an PHR application that helps to record and manage the symptoms of an atopic dermatitis in KM. We also derived the symptom collection process and method and applied it to the application. Results : In this study, the types of symptoms collected for atopic dermatitis were derived. Symptoms include daily check, stool/urine/sleep, daily emotion, meal management, symptom photographs, SCORAD, quality of life, progress check, original symptom, pediatric health check, weakness check, and subjective symptoms. The recording cycle can be divided into the first, daily, weekly, specific day, and subjective. We developed the PHR application of atopic dermatitis in KM by deriving the type of symptoms and symptom recording process. The app organized menus into dashboards, checklists, daily checks, and health records. Conclusions : We developed a PHR application for atopic dermatitis by deriving symptom collection items of atopic dermatitis and developing symptom collection process and collection technique. The app does not make an accurate diagnosis of atopic dermatitis symptoms, but it helps facilitate symptom collection and helps to identify or predict a person's health condition. It can also be used for medical treatment through sharing symptoms with Korean medicine. Patients are able to communicate in both directions on a daily, weekly, self-aware basis, at the request of a doctor, to record their symptoms and use them for medical purposes. If the doctor asks for a progress check to refer to the next examination, it can be written through the system. This manages atopic dermatitis in daily life and can be used in the clinical field.

• Korean journal of applied entomology
• /
• v.59 no.2
• /
• pp.153-163
• /
• 2020

This study was conducted to evaluate the fitness of Tetranychus kanzawai Kishida on different host plants: young and old leaves of the mandarin orange 'shiranuhi' ((Citrus unshiu × C. sinensis) × C. reticulata), Japanese violet (Viola japonica Langsd.) and kidney bean (Phaseolus vulgaris L.). The development and oviposition experiments were conducted at constant temperatures (20, 25 and 30℃) and a life table parameters were estimated. T. kanzawai could complete it's development on 'shiranuhi' young leaves, japanese violet and kidney bean, while all died during the immature period on 'shiranuhi' old leaves. The total developmental period of T. kanzawai feeding on 'shiranuhi' young leaves was 17.4, 13.4 and 10.2 days at each temperature, respectively, which was longer than 16.1, 9.5 and 7.0 days of kidney bean. The female longevity of T. kanzawai on young leaves of 'shiranuhi' were 19.1, 15.0 and 12.3 days at each temperature, respectively, and there was no significant difference from 22.1, 14.1 and 10.9 days investigated from kidney bean. The fecundity was 18.1, 23.9 and 17.8 eggs per female, which was less than them of japanese violet and kidney bean at each temperature, respectively. As a result of estimating the life table parameters based on the experimental data, intrinsic rate of increase (r_m) were significantly different from each other, and appeared in the following order: kidney (0.1542, 0.2563 and 0.3251), japanese violet (0.1087, 0.2007 and 0.2673) and 'shiranuhi' young leaves (0.0868, 0.1002 and 0.1217) at each temperature, respectively. Finally, the management strategy against T. kanzawai in citrus orchards was discussed based on the results.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.4
• /
• pp.733-762
• /
• 2014

The government mandates that national research facilities & equipments through R&D business budget should be registered on the National Science and Technology Information Service (NTIS) for the purpose of the efficient use of the research facilities & equipments. This study is to contribute to the national policies on the efficient management of the research facilities & equipments by recognition methodology with the university's members and analysis of the impact factors of the universities' registration process improvement through the Define level and Measure level of the Six Sigma DAMIC. The survey and interview were conducted on research directors, professors joining university administration, graduate students, researchers, and staffs of A University. The findings are the lack of understanding specific steps and life-cycle management of research facilities & equipments. It is necessary to collect suggestions from universities and pursue policies considered the unique characteristics of the university for advanced operating and maximizing use of university's national research facilities & equipments. Research facilities & equipments enrollment compliance rate and registration accuracy were selected as CTQ-Y through the Six Sigma. 72 potential cause variables were derived through Process Map and C & E Diagram. 13 variables were determined as core potential factors through the X-Y Matrix and Pareto Chart. Research institutions should maximize utilization of research facilities & equipments through deriving a potential variables of the process improvements and designing a detail improvements based on the characteristics of each institutions.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.98-106
• /
• 2015

VE aims at reduction in a budget, improvement of function, structural safety and quality security for public construction projects. However, there is possibility for the structural safety and quality security review to be insufficient because related regulations are mostly composed of analysis on economic efficiency of design. In addition, due to the misconception about VE as a cost saving methodology, an alternative is being presented which still focuses mainly on cost saving, but with no objective evaluation of function related to cost. In order to improve this, the government adopted the reduction of life cycle cost and proposal of value improvement, and let people specify the cost and function of the original plan versus the alternative plan, and the value changes between them. However, it is written mainly into practical convenience rather than theoretical basis since a specific way is not suggested. The current method sets a different starting point by applying the attributional difference of function and cost. Furthermore, an evaluation standard for correlating is an important element in rational decision making for assessing and choosing an alternative. This paper analyzes the process and method of function & cost scoring when performing VE and suggests a mathematical normalization model in order to support rational decision making when selecting an optimum plan.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.61-70
• /
• 2016

Construction enterprises have performed various projects such as buildings, infrastructure and plant projects in the international market. Among these, the plant project's amount of orders accounted for about 68.9% of all. However, because of the enterprises won a contract with a low-budget for plant project in the last 10 years, the profit has dropped dramatically. And it is forecasted that there are extreme competition for bid award of plant projects because of the current falling oil prices and raising interest rates. In this circumstance, the comprehending of enterprises strength and weakness must be a priority to get a sustainable competitive advantage. Therefore this research suggests the enterprises's capability assessment framework and it is in order to diagnose the korean construction enterprises capabilities. The framework is based on the VRIO model that is on the basis of resource based theory. First, the capability assessment indices and their importance and priority that based on the life-cycle of plant project is deducted by literature review and survey. Second, the 5 point likert score applied VRIO survey is conducted to diagnose the enterprises and quantified the survey result using the fuzzy theory. Lastly, the competitvie implication and capability assessment are deducted.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.111-118
• /
• 2009

This study is to analyze the performance of SWH(Solar Water Heating) and GSHP(Ground Source Heat Pump) systems by evaluating their energy efficiency and LCC(Life Cycle Cost) as being applied to the OO hall as a selected building in the Army. The OO hall, used as bathrooms, dining rooms, accommodations and offices, has reinforced concrete structure system with three floors above the ground and one underground, and its total floor area is approximately 2,917$m^2$. Two energy simulations are conducted to predict the yearly cooling and heating energy of the selected building: One is for analysis of an air-conditioning energy consumption using the e-Quest program, and another is for two new-renewable energy facilities as a water heating source using the RETScreen. The installed capacity of two new-renewable energy facilities is determined according to the 5% level of total standard construction cost. As a briefly result, SWH system is more energy-effective than GSHP system. Considering the break-even point, it is expected that SWH can take only 3 years 11 months to pay for itself in savings while the investment of GSHP can be recovered in more than 16 years 6 months.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.859-864
• /
• 2002

The life cycle of new information technologies is getting shorter, and the technologies are becoming more complex and difficult to understand. The need to better understand adoption of object orientation motivates this paper. Adoption of object orientation should certainly be influenced by prior software process technologies, such as the process-oriented structured methods, because object orientation is considered to be a paradigm shift from conventional software process technologies. This study aims to empirically analyze knowledge interference of the structured methods with object orientation. A two factorial quasi-experimental design is set forth. The period of experience using the structured methods and the period of experience using object orientation are selected as two independent variables, and the perceived ease of use is chosen as one dependent variable. Data are gathered from active members of Data Processing Management Association (DPMA), who have experiences in using both the structured methods and object orientation. The final results empirically show that previous experience using the structured methods negatively influences the perception of using object orientation that is one of critical factors to technology adoption. It is suggested here that a future study dealing with the same research topic in other countries will provide new insights about comparative studies.