• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1087-1091
• /
• 2009

The concept for algorithm needs to be established in various fields such as architecture, medicine and life science but understanding only theoretically has its limits. It is therefore educated using many multimedia factors but still is difficult to bring interests and carry out the higher level courses. For algorithm and programming, due to the subject's peculiarity it is very important to actually execute the program to understand the realization theory. In this paper, it aims to design a basic concept of algorithm using a flow chart of visualizing program and an algorithm education system to learn the basic programming C language, which is the fundamental element in algorithm learning.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.38-46
• /
• 2000

In this paper, a grating to apply for the optical interconnection is designed using a Genetic Algorithm(GA) as a robust and an efficient schema. A hybrid optical interconnection system architecture is implemented by the liquid crystal panel as a programmable spatial light modulator. As the result of geometrical transformation to obtain the quantitative data for $3{\times}3$ spot beams at CCD array detector by optical experiment truthfully, the mean of beam intensity as a gray level is 202, the maximum value is 225, the minimum value is 186, and a uniformity is quantitatively $1.93{\times}10^{-1}$ similar to simulation result.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.755-759
• /
• 2009

The ability to recognize human emotion is one of the hallmarks of human-robot interaction. Especially, speaker-independent emotion recognition is a challenging issue for commercial use of speech emotion recognition systems. In general, speaker-independent systems show a lower accuracy rate compared with speaker-dependent systems, as emotional feature values depend on the speaker and his/her gender. Hence, this paper describes the realization of speaker-independent emotion recognition by rejection using confidence measure to make the emotion recognition system be homogeneous and accurate. From comparison of the proposed methods with conventional method, the improvement and effectiveness of proposed methods were clearly confirmed.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.61-69
• /
• 1990

We have investigated the digital bit synchronization problem in baseband communication receiver systems using the Gauss-Markov estimation technique which is equivalent to the weighted least square method. The realized bit synchronizer, including the data detector, processes the input signal two dimensionally into the transition phase and data level under the white Gaussian noise environment. We have confirmed the relization of the bit synchronizer via computer simulation. In addition, we have compared and evaluated the estimation error performance of the proposed method with that of the conventional DTTL method and of the minimum likelihood method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.42-49
• /
• 2006

In this research. the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engines to the high expansion diesel cycle, and general cycle features were analyzed after comparing these two cycles. Based on these analyses. an experimental single cylinder a long stroke with high expansion-diesel engine. of which S/B ratio was more than 3, was manufactured. After evaluating the base engine through basic experiments, a diesel engine was converted into the high expansion diesel engine by establish VCR device and VVT system Accordingly, the high expansion diesel cycle can be implemented when the quantity of intake air is compensated by supercharge and the effective compression ratio is maintained at its initial level through the reduction of the clearance volume. In this case, heat efficiency increased by $5.0\%$ at the same expansion-compression ratio when the apparent compression ratio was 20 and the fuel cut off ratio was 2. As explained above, when the atkinson cycle was used for diesel cycle, heat efficiency was improved. In order to realize high expansion through retarding the intake value closing time, the engine needs to be equipped with variable valve timing equipment, variable compression ratio equipment and supercharged pressure equipment. Then a high expansion diesel cycle engine is realized.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.12
• /
• pp.1044-1052
• /
• 1990

We have investigated the digital bit synchronization problem in baseband communication receiver systems using the Gauss-Markov estimation technique which is equivalent to the weighted least square method. The realized bit synchronizer, including the data detector, processes the input signal two dimensionally into the transition phase and data level under the white Gaussian noise environment. We have confrmed the realiation of the bit synchronizer via computer simulation. In addition, we have compared and evaluated the estimation error performance of the proposed method with that of the conventional DTTL method and of the minimum likelihood method.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.115-119
• /
• 2022

A readout circuit for a mercury-cadmium-telluride (MCT)-amplified mid-wave infrared (IR) photodetector was realized and applied to noncontact chemical agent detectors based on a quantum cascade laser (QCL). The QCL emitted 250 times for each wavelength in 0.2-㎛ steps from 8 to 12 ㎛ with a frequency of 100 kHz and duty ratio of 10%. Because of the nonconstant QCL emission power during on-duty, averaging the photodetector signals is essential. Averaging can be performed in digital back-end processing through a high-speed analog-to-digital converter (ADC) or in analog front-end processing through an integrator circuit. In addition, it should be considered that the 250 IR data points should be completely transferred to a PC during each wavelength tuning period of the QCL. To average and minimize the IR data, we designed a readout circuit using the analog front-end processing method. The proposed readout circuit consisted of a switched-capacitor integrator, voltage level shifter, relatively low-speed analog-to-digital converter, and micro-control unit. We confirmed that the MCT photodetector signal according to the QCL source can be accurately read and transferred to the PC without omissions.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.317-319
• /
• 1996

In this paper, an active vibration control system using a voice coil type linear oscillating actuator(LOA) is studied to suppress structural vibration. Being compared with a hydraulic actuator, a LOA has simplified structure and requires a few elements in the driving system, so it has lots of merits with respect to economics and maintenance. The general mathematical dynamic model to obtain the algorithm for the realization of vibration active control system is treated. Actually, the performance test of the control system using LOA is carried out on a steel test structure under sinusoidal and white noise excitation. From this test it is conformed that acceleration level of test structure is reduced near the resonance region. In the future research on the application to large structures will be studied.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.261-270
• /
• 2004

The study was designed to forecast and derive future core technologies using Delphi method in Korea agriculture. Based on the technologies, agriculture in Korea will be expected to improve as a core and strategic industry producing high value added in 21 century. Questions were given to specialists by each technology in order to survey importance, realization time, level of R&D in Korea and the leading country, leading group of R＆D, effective policy, etc. for each technology. The survey for Delphi was confined to the specialists in the area of crop production. The 44 core technologies were derived and 39 specialists answered the survey.