• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.469-480
• /
• 2004

The radon concentrations were measured to survey distribution of radon concentrations in Seoul subway stations. The radon concentrations in air and water were measured at seventeen subway stations(Mapo, Chungjongno, Sodaemun, Kwanghwamun, Chongno3ga, Ulchiro4ga, Tangdaemun, Sangildong on Line 5;Nowon, Chunggye, Hagye, Kongnung, Taenung, Mokkol, Chunghwa, Sangbong, Myomok on Line 7) using the $RAdtrak^{TM}$ radon gas detector, Pylon AB-5 continuous passive radon detector and liquid scintillation counting method from January to May 1999. The major results obtained from this study were as follows: The long-term mean concentrations of radon were $61.8\;Bq/m^3$ in office, $78.9\;Bq/m^3$ in platform, $38.2\;Bq/m^3$ in concourse and $20.1\;Bq/m^3$ in outdoor, respectively. These levels were less than the action level ($148\;Bq/m^3$) of the U.S. EPA. The highest level of short-term mean concentrations was $116.55\;Bq/m^3$ at Chongno3ga station on the 5th line subway stations, while the lowest mean concentration was $19.55\;Bq/m^3$ at Mokkol station on the 7th line subway stations. The highest concentration of radon in the road water and storing underground water in the subway stations was $234.7\;KBq/m^3\;and\;155.5\;KBq/m^3$ in Sodaemun subway station, respectively. The results suggest that radon concentration in subway stations seems to be affected by ventilation and radon concentratin in underground water in the subway stations.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1532-1536
• /
• 2020

For ensuring nuclear safeguards, we report the analytical signal-detection performance of thermal ionization mass spectrometry (TIMS) with continuous heating for the measurement of isotopic ratios in samples containing ultra-trace amounts of uranium. As methods for detecting uranium signals, peak-jumping mode using a single detector and static mode using multiple detectors were examined with U100 (10% ²³⁵U-enriched) uranium standard samples in the femtogram-to-picogram range. Uranium isotope ratios, n(²³⁵U)/n(²³⁸U), were measured down to levels of 1 fg and 3 fg in static and peak-jumping modes, respectively, while n(²³⁴U)/n(²³⁸U) and n(²³⁶U)/n(²³⁸U) values were measured down to levels of 100 fg in both modes. In addition, the dependency of the ²³⁸U signal intensity on sample quantity exhibited similar tendencies in both modes. The precisions of the isotope ratios obtained in the static mode over all sample ranges used in this study were overall slightly higher than those obtained in peak-jumping mode. These results indicate that isotope ratio measurements by TIMS with continuous heating are almost independent of the detection method, i.e., peak-jumping mode or static mode, which is characteristic of isotope-ratio measurements using the TIMS method with continuous heating. TIMS with continuous heating is advantageous as it exhibits the properties of multiple detectors within a single detector, and is expected to be used in various fields in addition to ensuring nuclear safeguards.

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.11
• /
• pp.11-14
• /
• 1990

The detection of pulmonary blood vessels is very difficult owing to their complex tree structures and different widths. In this paper, We propose a new detection algorithm. The motivation of this algorithm is that Han is the best detector. So, this algorithm is developed to imitate the human searching process. To realize it, the algorithm consist of two components. One is Pyramid Images whose one pixel is median value of four pixels of the previous low level. Searching gradually from high level to low level, We concentrate on global and main information of structure at the first. Then based on it, We search the detailed data in low level. The other is fuzzy logic which makes it easy to convert searching process expressed as human language into numeric multi_value. This algorithm showes speedy and robust results. But the more study on both human searching process and the detection of small part is needed.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.89-94
• /
• 1991

In the quantitative analysis of oxygenated exhaust emissions (unburned methanol, formal- dehyde) from methanol fueled vehicles, the oxygen contained in oxygenated exhaust gases lowers the FID (Flame Ionization Detector) response factor of conventional THC analyzer and leads to erroneous HC reading. For correct measurement of various HCs including oxygenated HCs emitted from FFV(Flexible Fuel Vehicle), first of all, the measurement technique of real HC emissions should be established. GC and HPLC-DNPH measuring methods specified by the EPA are used in this paper to analyze unburned methanol and formaldehyde components in the exhaust emissions. In emission test of FFV, unburned methanol and formaldehyde are emitted mostly during cold transient period, and it is shown that formaldehyde emission level is proportional to engine displacements. In view of the HC emission level, vehicle using M85 has 40% advantage over gasoline-fueled vehicle in OMHCE and has a good potential of a low emission vehicle.

• Korean journal of food and cookery science
• /
• v.23 no.4 s.100
• /
• pp.413-422
• /
• 2007

In this study, changes in the volatile compounds of Artemisia capillaris essential oil were investigated under six different storage conditions for 6 months. The essential oil was collected by steam distillation and analyzed by a gas chromatography-mass selective detector (GC-MSD). Seventy-five volatile compounds were identified from the fresh essential oil of Artemisia capillaris. During storage, the total levels of aldehydes, alcohols, and ketones slightly decreased and the level of hydrocarbons greatly decreased; the total level of esters also decreased in the essential oil. Notably, the levels of carvacrol, eugenol, myrcene, 1,8-cineole, caryophyllene, coumarin, ${\alpha}-thujone$, ${\beta}-thujone$, borneol, and ${\gamma}-terpinene$, known as antioxidants and antimicrobial agents, decreased during storage. Finally, aerobic storage conditions caused greater reductions in some compounds even at low temperatures.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.76-83
• /
• 2008

A low power(9 mW) highly-digitized 2.4 GHz receiver for sensor network applications(IEEE 802.15.4 LR-WPAN) is realized by a $0.18{\mu}m$ CMOS process. We adopted a novel receiver architecture adding an intermediate frequency (IF) level detection scheme to a low-power complex fifth-order continuous-time(CT) bandpass L:tl modulator in order to digitalize the receiver. By the continuous-time bandpass architecture, the proposed $\Sigma\Delta$ modulator requires no additional anti-aliasing filter in front of the modulator. Using the IF detector, the achieved dynamic range(DR) of the over-all system is 95 dB at a sampling rate of 64 MHz. This modulator has a bandwidth of 2 MHz centered at 2 MHz. The power consumption of this receiver is 9.0 mW with a 1.8 V power supply.

• The Journal of Korea Robotics Society
• /
• v.3 no.3
• /
• pp.186-193
• /
• 2008

We propose a novel real-time obstacle avoidance method for rescue robots. This method, named the ELA(Emergency Level Around), permits the detection of unknown obstacles and avoids collisions while simultaneously steering the mobile robot toward safe position. In the ELA, we consider two sensor modules, PSD(Position Sensitive Detector) infrared sensors taking charge of obstacle detection in short distance and LMS(Laser Measurement System) in long distance respectively. Hence if a robot recognizes an obstacle ahead by PSD infrared sensors first, and judges impossibility to overcome the obstacle based on driving mode decision process, the order of priority is transferred to LMS which collects data of radial distance centered on the robot to avoid the confronted obstacle. After gathering radial information, the ELA algorithm estimates emergency level around a robot and generates a polar histogram based on the emergency level to judge where the optimal free space is. Finally, steering angle is determined to guarantee rotation to randomly direction as well as robot width for safe avoidance. Simulation results from wandering in closed local area which includes various obstacles and different conditions demonstrate the power of the ELA.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.511-514
• /
• 2003

본 연구는 입력된 영상으로부터 특정한 형태를 이루고 있는 대상 물체를 추출함에 있어, 처리에 소요되는 시간 비용(Time cost)을 줄이는 것을 목적으로 하고 있다. 이를 위하여 특정 관심 지역(Region of Interest)이나 대상 물체(Tareet object)의 경계 검출(Boundary detection)을 하는 과정에 통계학적 수치자료(SSM : Statistical Shape Model)를 사용한 접근법을 이용하였다. 또한, 향후 연구 방향인 의료 영상해석(Medical image analysis)으로의 확장성을 고려, 의료 영상 해석에 많이 사용되어지는 MRI, CT, X-Ray 이미지가 Gray level 영상이라는 것을 감안하여 Gray level 영상을 연구 대상으로 삼았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1734-1737
• /
• 1997

The conventional fire detection devices are operated after a processed fire phase, which are sensing only a high density of somke level or high temperature heat. They are not so precision to detect a fire in the early phase to protect the facility form the fire. We need to develope a new high precision smoke detection system to keep expensive industrial facilities most reliably form fire. A new optical precision smoke detection system was developed. It monitors very low level density of smoke particles in the air. It is operated continously through many years without a stop or any malfunction. The developed precision smoke detection system will be installed in important industrial facilities, such as power plants, underground common tunnel, main control rooms, computer rooms etc.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.111-120
• /
• 2014

BACKGROUND: This study was conducted to investigate the levels of pesticide residues in fruits and to assess their risk to human health. METHODS AND RESULTS: Monitoring of 215 samples of fruits collected from local markets in incheon during 2013 was performed. 259 pesticides were analyzed by multi-residue method and Quick, Easy, Cheap, Effective, Rugged, and safe/Mass/Mass(QuEChERS/MS/MS) method using Gas Chromatography-Electron Capture Detector/Nitrogen Phosphorus Detector(GC-ECD/NPD), GC-MS, LC(Liquid Chromatography-Mass/Mass(LC-MS/MS) and High Performance Liquid Chromatography-Photodiode Array/Fluorescence Detector(HPLC-PDA/FLD). In 56.3% of the samples detected pesticide residues and were not found to exceed Maximum Residue Limits(MRL). The highest detected samples were found in citrus fruits(83.9%). Among the detected compounds, carbendazim(13.1%), imazalil (11.7%), thiabendazole(10.7%) and fludioxonil(9.8%) were frequently found in fruits. A risk assessment of pesticide residues in fruits was performed by calculating Estimated Daily Intake(EDI) and Acceptable Daily Intake(ADI). Also, we were evaluated removal efficiency of pesticide residues by washing and peeling. The removal efficiency of pesticide residues in citrus and tropical fruits by peeling processes were 91.6%. After the washing process, the removal rates were 43.1%(Cherry, Grape, Blueberry). CONCLUSION: The level of pesticide residues in fruits was within the MRL. The range of %ADI values was from 0.00011 to 0.98795%. The process of washing or peeling reduces the level of pesticide residues. The results of this research concluded that the detected pesticides are not harmful to human being.