• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.798-803
• /
• 2015

This study was conducted to predict the effect of door opening in wooden cultural heritages (WCHs) on their conservation environment. For this prediction, measured relative humidity (RH) and surface wood moisture content (MC) of inner part of wood columns in open wooden building and neighboring closed wooden building were compared with minimum RH, including the duration of minimum RH, and MC required for spore germination and resultant growth of wood-degrading fungi reported in some literatures. Moisture conditions, namely RH of inside wooden building and MC of wood was unsuitable for decay and sap-stain fungi all the year round; however, moisture conditions during summer season was suitable for spore germination and resultant growth of surface mold fungi, regardless of door opening. When compared, the duration of minimum (75%) or higher RH and the number of wood columns with MC level greater than the minimum MC (15%) during summer season, the surface mold related to the conservation environment of inside wooden building was somewhat better in open building than in closed building. Rather, doors should be opened in closed building for reducing indoor RH as a necessary measure during summer season when outdoor RH is high.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.486-496
• /
• 2018

This study was conducted to confirm an effect of span length on bending properties of larch dimensional lumber in the four point bending test. The size of specimen in this study was 38 (width) ${\times}$ 89 (depth) ${\times}$ 3,600 (length) $mm^3$, and average air-dry density and moisture content of the specimens was $543.5kg/m^3$ and 10.5%, respectively. Visually graded No. 1 dimensional lumbers of 248 were divided by two groups to compare modulus of rupture (MOR) and modulus of elasticity (MOE). One group was tested in the four point bending test with span length of 1,650 mm, and other was tested with span length of 3,000 mm. While MOE was not different according to span length in 5% significance level, MOR was different in accordance with span lengths and was in inverse proportion to change of span length. Fifth percentiles of MOR in span length of 1,650 and 3,000 mm were 28.65 and 25.70 MPa, respectively. It was confirmed that the difference between MORs in each case increased as normalized rank increased. This is because of size effect in Weibull weakest link failure theory. Therefore, KS F 2150, in which there is only regulation about span to depth ratio of 15 or more, is needed to be revised to contain a method considering size effect for MOR. From the method, various results of bending test with different size of lumber could be used to determine design value of lumber.

• Journal of Korean Public Health Nursing
• /
• v.16 no.2
• /
• pp.239-253
• /
• 2002

Health care for women regularly focuses on the reproductive system to the exclusion of other health needs. The lack of research focusing on women's common health issues is a major problem to the enhanced optimal level of women's health. Health care providers have to recognize biological and social differences between men and women. This study was conducted to identify the baseline data and their correlation of health perception, health behavior, and health status of adult women for developing nursing intervention. The study was a descriptive correlational design. A convenient sampling method was used for collecting data from 103 adult women, over 18 years of age, during the period from Sep 1 to Nov 30, 2001. The study's subjects were interviewed using a structured questionnaire. The instruments for this study were the health perception scale modified by Lee(1985) based on the tool developed by Ware(1977) and Jenkins (1966), and the health behavior scale by Ko, Kumja(1987). Health status was measured by the short form Cornell Medical Index(CMI) modified by Nam, Hochang(1965). The data were analyzed SPSS PC+, by frequency, mean, t-test, ANOVA, and Pearson correlation coefficients. Also, the Duncan test was utilized for a post hoc test of ANOVA. The results of this study are as follows: 1. The mean score for health perception was 3.02(S.D=0.39) on a 5 point scale. 2. The mean score for health behavior was 3.08(S.D=0.43) on a 5 point scale. 3. The mean score for health status was 18.54 on 58 items. The mean score for physical symptoms of a subscale of health status was 11.30 on 36 items and the mean score for psychological symptoms was 7.37 on 22 items. 4. The relationship of sociodemographic variables to health perception. health behavior, and health status of women.: 1) There were significant differences in the scores of health perception by disease experience(t=-3.37, p=0.00). 2) There were significant differences in the scores of health behavior by age(F=10.52, p=0.00), height(F=4.73, p=0.01), marital status(t=-5.56, p=0.00), educational background(t=2.90, p=0.00), and drinking or non-drinking(t=2.17, p=0.03). 3) There were significant differences in the scores of health status by educational background(t=2.28, p=0.02) and disease experience(t=2.61, p=0.01). 5. Health perception showed significant positive correlation with health behavior(r=0.39, p=0.00). Health perception showed significant negative correlation with health status(r=-0.44, p=0.00), that is, the more women perceived health, the less she complained about unhealthy symptoms. Health behavior had no significant correlation with health status but showed a positive correlation with psychological symptoms of a subscale of health status(r=-0.19, p=0.05). Many of the leading causes of disease are preventable through changes in health perception and behavior. The need to increase individual awareness of relationships among health perception, health behavior, and health status and to enhance knowledge regarding the long-term effects of positive health behaviors, is an important nursing strategy for women's health promotion.

• Journal of Arbitration Studies
• /
• v.21 no.2
• /
• pp.85-112
• /
• 2011

These days utilization of copyright in daily life and economic activities is becoming more important than ever, and IT technology is developing day by day. Along with those fact, copyright infringement and dispute is naturally increasing. This thesis dealt with the 3 different issues of ADR on copyright. The First part, introduce ADR system that was performed by Korea Copyright Committee according to Copyright law. This paper evaluate the committee's efforts to provide resolution of copyright disputes via conciliation was effective. So it needs to be look over several countries' ADR, beside conventional judicial remedy. And Korea's copyright conciliation system which is successfully operating also introduced. Second, In many countries, including South Korea are take advantage of conciliation as the way to settle down the dispute over copyright. Furthermore, looked over if we can use arbitration as tool to settle dispute or not. Currently in Korea, patent dispute is handled by Industrial Property Dispute Conciliation Committee(The Invention Promotion Act Ch.5) and Layout-design Review and Mediation Committee(The Act on the Layout-designs of Semiconductor Integrated Circuits Art.29-34), but using performance of those two committee is still too low. In comparison, the copyright committee, a affiliation organization of the ministry of culture, sports and tourism has much more result in conciliation compare with patent dispute. Copyright disputes has arbitrability of it's subject-matter and many regulating organs are interested in it. (especially, binding of arbitral award and final resolution). Take advantage of both conciliation and arbitration could be good way to resolve copyright disputes. Third, the writer look at the proposal on the creation of Northeast Regional Center for Intellectual Property ADR. Because of the nature of copyright and rapid development of internet technology, international use of work become more frequent and accordingly infringement cases are increasing. The role of commercial arbitration regimes and institutions which has progressed significantly worldwide level, but which has only just begun in the intellectual property ADR area, leads also to a clash of often very different legal cultures and protection in a market economy. International cooperation in regional area with conflict interests becomes an important alternative. But it will depend on the building of regional institutions and mechanisms. The feasibility of this proposal and preconditions were examined. Establishment of new international organization requires a lot of time, cost and efforts. And risk of failure is much too high. Therefore factual, statistical review should be preceded. In addition, technical measures, such as on-line arbitration is necessary to review also. Furthermore in order to establish new organization, the relative law, legal environment, public sentiment and international compliance must be carefully considered with factual review about the needs and economic benefits of each country Yet on complex regulatory matters such as IP and ADR, a great deal of the potential benefits from international standards arises not from the international legal framework nor even the formal content of national legislation, but from the informed and effective use made of the possibilities within the system, including by policymakers and regulators.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.677-685
• /
• 2015

In a will to subdue the brittleness as well as the low tensile and flexural strengths of ordinary concrete, researches are being actively watched worldwide on steel fiber-reinforced Ultra High Performance Concrete (UHPC) obtained by admixing steel fibers in ultra high strength concrete. For the purpose of maximizing advantage of UHPC, this study removes the upper flange of the steel girder to apply an inverted T-shape girder for the formation of the composite beam. This paper intends to evaluate the behavior of the shear connectors and the flexural characteristics of the composite beam made of the inverted T-shape girder and UHPC slab using 16 specimens considering the compressive strength of concrete, the mixing ratio of steel fiber, the spacing of shear connectors and the thickness of the slab as variables. In view of the test results, it seemed that the appropriate stud spacing should range between 100 mm and 2 or 4 times the thickness of the slab. Moreover, the relative displacement observed in the specimens showed that ductile behavior was secured to a certain extent with reference to the criteria for ductile behavior suggested in Eurocode-4. The specimens with large stud spacing exhibited larger values than given by the design formula and revealed that the shear connectors developed larger ultimate strength than predicted owing to the action of UHPC and steel after non-composite behavior. Besides, the specimens with narrow stud spacing failed suddenly through compression at the upper chord of UHPC before reaching the full capacity of the shear connectors.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.75-82
• /
• 2000

In this paper, a new low power 16-bit ALU has been designed, fabricated and tested at the transistor level. The designed ALU performs 16 instructions and has a two-stage pipelined architecture. For the reduction of switched capacitance, the ELM adder of the proposed ALU is inactive while the logical operation is performed and P(propagation) block has a dual bus architecture. A new efficient P and G(generation) blocks are also proposed for the above ALU architecture. ELM adder, double-edge triggered register and the combination of logic style are used for low power consumption as well. As a result of simulations, the proposed architecture shows better power efficient than conventional architecture$^{[1,2]}$ as the number of logic operation to be performed is increased over that of arithmetic to logic operation to be performed is 7 to 3, compared to conventional architecture. The proposed ALU was fabricated with 0.6${\mu}m$ single-poly triple-metal CMOS process. As a result of chip test, the maximum operating frequency is 53MHz and power consumption is 33mW at 50MHz, 3.3V.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.152-159
• /
• 2016

This paper describes an offset and 1/f noise cancellation technique based hall sensor signal processor. The hall sensor outputs a hall voltage from the input magnetic field, which direction is orthogonal to hall plate. The two major elements to complete the hall sensor operation are: the one is a hall sensor to generate hall voltage from input magentic field, and the other one is a hall signal process system to cancel the offset and 1/f noise of hall signal. The proposed hall sensor splits the hall signal and unwanted signals(i.e. offset and 1/f noise) using a spinning current biasing technique and chopper stabilizer. The hall signal converted to 100 kHz and unwanted signals stay around DC frequency pass through chopper stabilizer. The unwanted signals are bloked by highpass filter which, 60 kHz cut off freqyency. Therefore only pure hall signal is enter the ADC(analog to dogital converter) for digitalize. The hall signal and unwanted signal at the output of an amplifer and highpass filter, which increase the power level of hall signal and cancel the unwanted signals are -53.9 dBm @ 100 kHz and -101.3 dBm @ 10 kHz. The ADC output of hall sensor signal process system has -5.0 dBm hall signal at 100 kHz frequency and -55.0 dBm unwanted signals at 10 kHz frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.53-60
• /
• 2009

Motion estimation for H.264/AVC video CODEC is very complex and requires a huge amount of computational efforts because it uses multiple reference frames and variable block sizes. We propose the architecture of high-performance integer-pixel motion estimation circuit based on fast algorithms for multiple reference frame selection, block matching, block mode decision and motion vector estimation. We also propose the architecture of high-performance interpolation circuit for sub-pixel motion estimation. We described the RTL circuit in Verilog HDL and synthesized the gate-level circuit using 130nm standard cell library. The integer-pixel motion estimation circuit consists of 77,600 logic gates and four $32\times8\times32$-bit dual-port SRAM's. It has tile maximum operating frequency of 161MHz and can process up to 51 D1 (720$\times$480) color in go frames per second. The fractional motion estimation circuit consists of 22,478 logic gates. It has the maximum operating frequency of 200MHz and can process up to 69 1080HD (1,920$\times$1,088) color image frames per second.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.