• 한국화재소방학회논문지
• /
• 제16권1호
• /
• pp.18-23
• /
• 2002

저독성 폴리올레핀 절연재료, Sheath재료의 저독성, 연기밀도특성, 연소가스부식성 분석을 하기 위하여 저독성 내화케이블의 성능평가 시험을 수행하였다. 화재 발생시 화염확산 및 유독성가스발생의 주원인으로 피난안전계획에 매우 중요하다. 90년대 후반기부터 연이어 발생한 씨랜드 화재사고와 인천 인현동 라이브클럽등의 동일한 유형을 가진 화재사건을 계기로 국내 내화케이블에 사용되는 재료가 화재시 인명참사에 미치는 영향이 크다는 점이 발견되었다. 본 연구에서는 고체물질에서 발생하는 연기의 특성광학밀도를 ASTM E662를 근거로 하여 실험을 하였다. 전기로의 시스템은 20분동안 밀폐된 챔버내에서 2.5$\pm$0.04w/$\textrm{cm}^2$을 지닌 조사열량을 일정한 상태 하에서 방사를 유지할 수 있도록 하였다. NFR-8과 FR-PVC 연기밀도의 분해 결과에 따라 완전연소에 의한 연기밀도 최대값 NFR-8은 25.2에서 39.6 FR-PVC에서 51.1의 값을 얻을 수 있었다. 비연소 열분해에 의한 연기밀도 최대값 NFR-8은 100.4에서 112.2 FR-PVC는 126.5에서 398.8의 값을 얻을 수 있었다. 또한 시료의 연기밀도 분석결과 PVC가 폴리올핀 시료보다 상당히 많은 양의 CO가 발생되는 반면 $CO_24의 양은 적게 발생하였다.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2004년도 Annual Meeting BioExibition International Symposium
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted

• Journal of Biosystems Engineering
• /
• 제7권1호
• /
• pp.17-32
• /
• 1982

The binders introduced in Korea were originally designed to be used for Japonica-type varieties which have relatively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during binder operation. This study was intended to investigate analytically and experimentally the major sources of grain losses caused by three kinds of binders now introduced in Korea. Actual modification for each of three binders was done and experimentally compared to see if any improvement on grain loss was achieved. The results obtained in this study are summarized as follows; 1. It was required that the power transmission of binder should have a shifting mechanism so that velocities of pick-up and traveling units could be changed independently as desired according to the Japonica-type and Tongil varieties. In other words, the desired velocity of traveling unit should be obtained by shifting the transmission and the velocity of pick-up unit should be selected by reaping clutch according to the variety independent of the velocity of traveling unit as shown in Fig. 6. 2. To reduce grain loss it was desired that the moving parts of the pick-up unit should have the lowest possible velocities in harvesting Tongil varieties, unless the reduction of the speed be hindered the conveyance of the material. Based on the study, it was concluded that the velocities of pick-up unit be reduced by about 35% of those of the existing units. 3. It was found that the lug at the upper rotating section of pick-up case gave a severe impact on the ears of rice to increase grain loss. The optimum design of pick-up case to protect the ears from the protruding part of the lug was recommended by the result of analysis of the trajectory of the end-point of lug at the position. 4. It was proved analytically and experimentally that pick-up unit at the lower-rotating part was the other important source of grain loss in pick-up and divider assembly. In order to reduce a grain loss incurred by lugs at their lower-rotating section, it was suggested to improve it by (1) widening the space between right and left lower-rotating section, (2) shortening the length of lugs, (3) enlargement of the angle between the pick-up case and ground-level, and (4) attaching guard to right and left dividers so that the rotating lug could not give a high impact to the paddy hill. 5. Pick-up and divider assembly of the original binder of three models studied was modified according to the suggestions that were given by the preliminary study. Field test showed that the modified binders were able to reduce grain losses by about 0.4-0.7 percentage points compared to those without modification.

• 대한의생명과학회지
• /
• 제11권4호
• /
• pp.509-515
• /
• 2005

This study was conducted to determine the kinetics of cyclohexane metabolites (the biomarker on cyclohexane exposure), the changes of hepatic cyclohexane metabolizing enzyme activities and the metabolites of cyclohexane in urine or serum. The rats were sacrificed at 2, 4, 8, 12 and 24 hr after administration of one dose of cyclohexane (1.56 g/kg body weight, i.p.). The metabolites of cyclohexane in urine were identified as cyclohexanol, cyclohexanone, trans-l,2-cyclohexanediol and 1,4-cyclohexanediol with cyclohexane metabolite being 124.00, 0.78, 23.28 and 2.75 (g/g of creatinine, $1\times10^{-3}$). Most of the cyclohexanol and trans-l,2-cyclohexanediol were determined to be in the form of $\beta-glucuronide$ conjugates, whereas cyclohexanone and 1 ,4-cyclohexanediol were found as free forms. In toxicokinetics of serum cyclohexane metabolites, cyclohexanol showed a rapid increase, reaching the plateau at 4 hr, after this time rapidly decreased throughout 24 hr. Changes of cyclohexanone also showed the similar pattern with cyclohexanol except somewhat lower concentration. Trans-l,2-cyclohexanediol, however, showed a gradual increase until 12 hr with the continued same levels throughout 24 hr. On the other hand, 1,4-cyclohexanediol was detected as trace levels at 4 and 12 hr, respectively. The administration of cyclohexane led to a significant increase of hepatic aniline hydroxylase activity from 2 to 8 hr. The activity of hepatic alcohol dehydrogenase showed a significant increase at 4 hr and then were recovered to the level of the control at 24 hr. On the other hand, there were no differences in liver weightlbody weight between the control and cyclohexane-treated animals. However, there were the changes of aniline hydroxylase and alcohol dehydrogenase activities on time-dependent pattern after cyclohexane treatment, which influence on the degree of cyclohexane metabolites both in blood and urine. These results suggest that differential determination of cyclohexane metabolites in urine and serum may be able to be as a biomarker of cyclohexane-exposure in the body. But in this fields further study is needed.

• 감성과학
• /
• 제23권2호
• /
• pp.103-120
• /
• 2020

본 연구에서는 운전 시뮬레이션을 이용하여 적응형 정속 주행(adaptive cruise control: ACC) 시스템에 대한 운전자의 신뢰 및 도로 혼잡도가 운전자의 작업부하와 상황인식에 미치는 효과를 알아보았다. ACC 시스템에 대한 운전자의 신뢰는 ACC 시스템이 정상 작동하는 조건과 시스템이 오작동하는 조건을 통해 신뢰상승 집단과 신뢰감소 집단으로 구분하였다. 도로 혼잡도는 운전자 차량 주변의 차량 수로 수준을 조작하였다. ACC 시스템에 대한 신뢰와 도로 혼잡도를 달리한 네 가지의 실험 조건 각각에 대해 운전자들의 작업부하와 상황인식을 측정하였다. 본 연구의 결과를 요약하면 다음과 같다. 먼저 ACC 시스템에 대한 신뢰감소 집단은 신뢰상승 집단에 비해 이 시스템의 사용으로 인한 운전부담 경감이나 안전운전 확보 등을 포함한 측정 항목 모두에서 시스템에 대한 신뢰 점수가 유의하게 더 낮았다. 둘째, ACC 시스템에 대한 신뢰감소 집단은 신뢰상승 집단에 비해 이차과제에서 더 느린 반응시간을 보였고, 시스템 사용에서의 주관적인 작업부하 수준도 더 높게 평정하였다. 셋째, 이와는 대조적으로 운전자들의 운전상황에 대한 상황인식은 ACC 시스템 신뢰감소 집단이 신뢰상승 집단보다 유의하게 더 우수하였다. 본 연구의 결과들은 ACC 시스템에 대한 신뢰가 운전 중에 수행하는 다양한 정보처리에 영향을 미칠 수 있음을 보였는데, 이것은 자동화된 운전보조 시스템의 설계에서 사용자의 시스템에 대한 신뢰가 중요한 변인으로 고려되어야 한다는 것을 시사한다.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2002년도 가을 학술발표논문집
• /
• pp.130-132
• /
• 2002

본 실험은 산란노계에서 강제환우 후에 단백질과 에너지수준이 다른 사료를 급여시에 생산성에 미치는 영향을 구명하고자 실행하였다. 76주령 이사브라운 노계를 강제환우후에 2수준의 단백질(15,17%)과 3수준의 대사에너지(2,750, 2,800, 2,850kca1/kg)를 2$\times$3요인 시험으로 처리구당 72수, 반복당 18수, 전체 432수를 배치하였다. 조사항목은 체중의 변화, 산란율, 난중, 사료섭취량, 사료요구율을 24주간 조사하였다. 체중은 2,800 kca1/kg ME 처리구에서 낮은 경향을 보였으며 이러한 처리구의 단백질 수준이 15%일 때 산란율이 가장 높게 나타났다. 사료섭취량은 사료의 대사에너지와 단백질 수준이 높아질수록 감소되었다. 본 실험의 결과 2,800 kca1/kg 대사에너지 급여구에서 15%의 단백질이 함유된 사료를 급여시에 체중의 변화가 적었으며, 산란율이 가장 높게 나타났다.

• 한국가금학회지
• /
• 제43권1호
• /
• pp.21-29
• /
• 2016

A total of 144 one-day-old male broilers (ROSS ${\times}$ Ross 308) ($42{\pm}0.1g$) were used in a completely randomized design and allotted to one of three dietary treatments to give 6 replicates per treatment (8 birds per cage). The three watery dietary treatments were 1) a corn-soybean meal-based relation [Negative control (NC); no antimicrobial compounds added] with tab water, 2) 8 ppm liquid-alpha-lipoic acid [Positive control (PC)] or 3) 100 ppm liquid-resveratrol. All dietary treatments were continuously provided as a liquid form. Birds were housed in a battery cage (n=48), and were offered liquid dietary treatments at all times. The ambient temperature was maintained at $32{\pm}1^{\circ}C$ for the first 3 weeks and decreased gradually to $28{\pm}1^{\circ}C$ by the end of the experiment (d 35) to induce moderate heat stress. One bird per pen (n=6) was euthanized via cervical dislocation at day 21 to obtain terminal ileum to measure villous height and crypt depth, while another bird per pen (n=6) was similarly euthanized at day 35 and used to harvest breast meat and drumsticks to evaluate meat quality traits. Birds fed liquid-resveratrol did not improve (P>0.05) body weight and average daily gain compared with those fed other dietary treatments from day 1 to day 35. Birds fed liquid-resveratrol had no effect (P>0.05) on villous height compared with birds were in other dietary treatments at day 21. Liquid-resveratrol had no effect (P>0.05) on thiobarbituric acid reactive substance (TBARS) in drumsticks compared with other dietary treatments at day 35. Furthermore, birds fed liquid-resveratrol had no effect (P>0.05) on DPPH radical scavenging activity both in breast meat and drumsticks compared with those fed other dietary treatments at day 35. Morphological changes of ileum were not observed by immunofluorescence, and the level of occludin protein from ileum extracts also did not differ among groups. Our results suggested that liquid form of antioxidant compounds used in the current study such as alpha-lipoic acid (8 ppm) or resveratrol (100 ppm) did not improve growth performance, meat quality traits and histology of terminal ileum compared with those fed negative control in broiler chickens under moderate heat stress for 35 days.

• 터널과지하공간
• /
• 제17권4호
• /
• pp.266-284
• /
• 2007

최근 국내 터널 분야에서는 현장타설 콘크리트 라이닝을 생략한, 이른바 무라이닝 터널을 적용하려는 시도가 수차례 있었으나 숏크리트가 영구 지보재로서의 성능을 확보하고 있는지에 대한 의구심으로 인해 시공으로는 이어지지 못하고 있다. 숏크리트는 시공 상 문제뿐만 아니라 강도기준이 유럽에 비해 현저히 낮고 내구성에서도 많은 문제를 내포하고 있는 것으로 파악되고 있다. 본 연구에서는 효율적인 배합개선을 통하여 압축강도 40 MPa, 휨강도 4.5 MPa 이상의 고강도 숏크리트를 개발하였으며 급결제 종류와 실리카퓸 첨가량을 주 변수로 하여 최대 2년까지의 성능변화 추이를 분석하였다. 또한 단기 내구성 평가를 위해서는 동결융해, 중성화, 염해에 따른 실험실 촉진 실험과 투수시험을 실시하였으며 장기 내구성 검증을 위해서는 실제 운영 중인 고속도로 터널 내에 시편을 적치하여 복합 환경에 대한 영향을 조사하였다. 분석결과 알칼리프리계만이 유일하게 고강도 목표기준을 만족하였으며, 또한 개발된 고성능 숏크리트가 내구성에 있어서도 매우 우수한 것을 확인하였다.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.418-426
• /
• 2008

인도네시아 파시르탄광에서 적용되고 있는 전형적인 발파방법은 지표면을 유일한 자유면으로 하는 일자유면 노천발파 공법이다. 일반적으로 일자유면 발파방법은 자유면이 하나뿐이므로 구속이 커서 큰 지반진동을 일으키게 된다. 큰 지반진동은 다시 채광장의 경계를 이루는 사면의 안정성에 나쁜 영향을 미칠 수 있다. 이런 측면에서 발파로 인한 지반진동으로부터 파시르탄광의 채광장 사면과 폐석장의 안전을 확보할 수 있는 발파지침을 마련하기로 하였다 먼저, 파시르탄광에서 발파로 발생될 수 있는 지반진동 수준을 예측할 수 있는 예측식을 유도하였다. 다음으로, 채광장 사면과 폐석장의 폐석더미를 관리하기 위한 지반진동 허용수준을 PPV 측정치로 각각 120mm/s 및 60mm/s로 설정하였다. 도출된 예측식과 설정된 허용수준으로부터 현장에서 사용할 수 있는 안전발파를 위한 환산거리 조건식을 설정하였다. 설정된 환산거리 조건식은 채광장 사면과 폐석더미에 대해 각각 $D_s{geq}5$ 및 $D_s{geq}10$이다. 또한, 환산거리 조건식을 만족시킬 수 있도록 천공장 $3.3{sim}8.8m$에 대하여 몇 가지 표준발파패턴을 제안하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제32권4호
• /
• pp.505-512
• /
• 1999

Objectives : The purpose of this study was to assess the relationship between job strains and absenteeism from work. Methods : The study design was cross-sectional, and the study subjects consisted of 1,166 workers who were employed in the small-sized industries. A self administered questionnaire was used to measure the general characteristics, job characteristics(job demand, job control), and social support(coworker support, supervisor support) at work. The Job Content Questionnaire(JCQ) was used to assess job demand(2 items) and decision lattitude(10 items). Social support at work (10 items) was measured using JCQ. Sick absence was collected using self-report and were rechecked by the attendance record of their company. Odds ratios and 95% confidence intervals for the association between job strain and sick absence were estimated. The modifying effect of social support was evaluated by stratification. Logistic regression was used to estimate the relationship between job strain and sick absence. Results : In the bivariate analysis, the variables related to sick absence were age, marital status, occupation, job demand. Four distinctly different kinds of level of job strain were generated by the combination of job demand and job control: low strain group, high strain group, active group, and passive group. The crude odds ratio of high job strain was 1.78(95% CI: 1.26-2.53), and those of active group and passive group were 1.33(95% CI: 1.07-1.66) and 1.13 (95% CI: 0.88-1.47), respectively. The odds ratio of high job strain after adjusting for age and occupation were still significant The odds ratio of high job strain in low social support was 5.96(95% CI: 2.45-14.51), but that in high social support was 0.73(95% CI: 0.26-2.01). Conclusions : Job strain was associated with increased risk of absenteeism from work, and social support at work modified the association between job strain and sick absence.