• Speech Sciences
• /
• v.3
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.364-369
• /
• 2004

In this Paper, a flashover prediction method using the leakage current in the contaminated EPDM distribution polymer insulator is proposed. The leakage currents on the insulator were measured simultaneously with the different salt fog application such as 25g, 50g, and 75g per liter of deionized water. Then, the measured leakage currents were enveloped and transformed as the CDFS using the Hilbert transform and the level crossing rate, respectively. The obtained CDFS having different gradients(angles) were used as a important factor for the flashover prediction of the contaminated polymer insulator. Thus, the average angle change with an identical salt fog concentration was within a range of 20 degrees, and the average angle change among the different salt fog concentrations was 5 degrees. However, it is hard to be distinguished each other because the gradient differences among the CDFS were very small. So, the new weighting value was defined and used to solve this problem. Through simulation, it Is verified that the proposed method has the capability of the flashover prediction.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.157-163
• /
• 2017

This system is a diagnosis system that checks whether it causes a partial discharge of a power cable or not. PD(Partial Discharge) is detected by FBDS(Frequency Band Detection Sensor). That is, it means a acoustic sensor capable of detecting each frequency band. The wave shape of PD sound is similar to noise and is systematically generated by partial discharge. Therefore, in this paper, we could discriminate between normal and abnormal case using relative level crossing rate(RLCR) and spectrogram of frequency energy rate.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.330-335
• /
• 1999

The goal of the study is to determine the most sensitive parameter to represent the degree of muscle force and fatigue. Various numerical parameters such as the first coefficient of Autoregressive (AR) Model, Root Mean Square (RMS), Zero Crossing Rate (ZCR), Mean Power Frequency (MPF), Median Frequency (MF) were tested in this study. Ten healthy male subjects participated in the experiment. They were asked to extend their trunk by using the right and left erector spinae muscles during a sustained isometric contraction for twenty seconds. The force levels were 15%, 30%, 45%, 60%, and 75% of Maximal Voluntary Contraction (MVC), and the order of trials was randomized. The results showed that RMS was the best parameter to measure the force level of the muscle, and that the first coefficient of AR model was relatively sensitive parameter for the fatigue measurement at less than 60% MVC condition. At the 75% MVC, however, both MPF and the first coefficient of AR Model showed the best performance in quantification of muscle fatigue. Therefore, the sensitivity of measurement can be improved by properly selecting the parameter based upon the level of force during a sustained isometric condition.

• Journal of Information Processing Systems
• /
• v.9 no.1
• /
• pp.117-140
• /
• 2013

Hindi is the most widely spoken language in India, with more than 300 million speakers. As there is no separation between the characters of texts written in Hindi as there is in English, the Optical Character Recognition (OCR) systems developed for the Hindi language carry a very poor recognition rate. In this paper we propose an OCR for printed Hindi text in Devanagari script, using Artificial Neural Network (ANN), which improves its efficiency. One of the major reasons for the poor recognition rate is error in character segmentation. The presence of touching characters in the scanned documents further complicates the segmentation process, creating a major problem when designing an effective character segmentation technique. Preprocessing, character segmentation, feature extraction, and finally, classification and recognition are the major steps which are followed by a general OCR. The preprocessing tasks considered in the paper are conversion of gray scaled images to binary images, image rectification, and segmentation of the document's textual contents into paragraphs, lines, words, and then at the level of basic symbols. The basic symbols, obtained as the fundamental unit from the segmentation process, are recognized by the neural classifier. In this work, three feature extraction techniques-: histogram of projection based on mean distance, histogram of projection based on pixel value, and vertical zero crossing, have been used to improve the rate of recognition. These feature extraction techniques are powerful enough to extract features of even distorted characters/symbols. For development of the neural classifier, a back-propagation neural network with two hidden layers is used. The classifier is trained and tested for printed Hindi texts. A performance of approximately 90% correct recognition rate is achieved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.237-243
• /
• 2014

Heart sounds of patient's chest could be heard using an analog stethoscope. However, auscultation of a heart sound can be diagnosed differently by each doctor hearing it. Therefore the condition of each patient is determined by the subjective comments based on the hearing ability of a physician who has years of experience. In this paper, through analysis of heart sound and heart rate of the patient's condition, we will define minutely how to diagnose the condition of patient using a wireless digital stethoscope diagnostic system. And it is possible to perform an objective medical diagnosis by applying LCR (Level Crossing Rate) and to show the relationship of a disease using this system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.111-115
• /
• 1982

The trials were carried out for improvement of early maturing wheat varieties, desease resistant and good quality through transfering good characters of barley to the wheat, during 1980-'81. For these purpose, Chinese Spring, a wheat variety was used as male and Manker 16 a barley variety, as female parents. EACA($\varepsilon$-Amino Caprolic Acid) known as an inhibitor of blood coagulation was injected to all barley from 14 days until heading with 1$m\ell$ per culm at the level of 500ppM. $GA_3$ solution which accelerates pollen activity was also used with 75ppM concentration after pollination for two days including check to determine the single effect of EACA. Two different methods of the cross were used. One was bud-pollination, another was post-pollination. The result indicated that the post-pollination was better than bud-pollination in terms of pollination rate, even though formation rate of normal embryo was seemingly adversed. The new plant derived from barley-wheat cross was similar in phenotype to the wheat.

• Journal of the Korean housing association
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2017

Korea is experiencing unprecedented destruction of communities and crisis of mental health represented by top suicide rate among OECD countries. Its causes are manifold of various factors. One of them is lack of social support and broken communities that are closely related to social capital that is linked to other health indicators such as mortality rates. This studies looks for ways to improve social capital through spatial structure and features especially social capital related to neighborhood. Researchers conducted research literature review and observation on physical features of neighborhood streets and alleys. Review of studies show housing types can affect social capital level. High-rise apartments are related with lower neighborhood related social capital compared to single homes and low-rise multi-housing. Studies that mainly examined the physical features such as street layout showed that social encounters happened around local stores and crossings of small roads. Researchers identified actual streets that are more likely to be related with social activities in the neighborhood. Those streets were with physical elements that helped social exchange such as narrower streets, exposed stairs, street furniture of residents, parks, crossing of streets while other streets were with wider and easier access of cars.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.237-243
• /
• 2004

A multichannel smart sound sensor capable to detect and identify sound events in noisy conditions is presented in this paper. Sound information extraction is a complex task and the main difficulty consists is the extraction of high­level information from an one-dimensional signal. The input of smart sound sensor is composed of data collected by 5 microphones and its output data is sent through a network. For a real time working purpose, the sound analysis is divided in three steps: sound event detection for each sound channel, fusion between simultaneously events and sound identification. The event detection module find impulsive signals in the noise and extracts them from the signal flow. Our smart sensor must be capable to identify impulsive signals but also speech presence too, in a noisy environment. The classification module is launched in a parallel task on the channel chosen by data fusion process. It looks to identify the event sound between seven predefined sound classes and uses a Gaussian Mixture Model (GMM) method. Mel Frequency Cepstral Coefficients are used in combination with new ones like zero crossing rate, centroid and roll-off point. This smart sound sensor is a part of a medical telemonitoring project with the aim of detecting serious accidents.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.374-381
• /
• 1995

For designing radio communication systems, radio-channel effects must be considered in order to obtain the desired communication quality, transmitting power, transmission speed and bit error rate. In radio channel, one of major factors that degrade communication quality is multipath fading between transmitting and receiving points. Therefore, a channel model which can describe fading effects correctly is requested. This paper deals with the composition of the channel simulator model that describes multipath fading effects and delay times which occur in the channel. For the performance analysis of the proposed model, trandmitting signal is used in the simulation. From simulation results, it can be shown that probability density function. level crossing rates and average fading-duration time distribution of the faded receive signal are very similar with theoretic values.