• 한국광학회지
• /
• 제17권6호
• /
• pp.537-543
• /
• 2006

단일 줌 카메라를 사용한 거리추정 방법은 시야 범위가 광 축으로 제한되기 때문에 거리 추정에는 한계가 있다. 본 논문에서는 넓은 범위에서 거리추정을 위한 수평이동 방식의 줌 렌즈를 이용한 입체영상에서의 물체의 거리 추정 방법을 제안한다. 거리 추정을 위하여 줌렌즈를 이용한 수평이동방식 카메라를 구현하였다. 제안한 방법으로 또한 편광 입체영상 모니터를 사용하여 카메라의 좌, 우 영상 정보를 획득하였다. 인간이 볼 수 있는 시야 범위를 추정하기 위해 좌, 우로 $0mm{\sim}500mm$ 범위에서 실 거리와 추정 거리를 구하였고 이의 오차는 10mm 미만이었다. 입체 카메라의 주시각 제어에 줌 기능을 사용하여 제어의 오차를 줄였기 때문에 주시각에 의한 거리 추정에서 보다 더욱 정확한 거리를 추정 할 수 있었다. 또한 교차방식과 수평이동방식의 거리 추정의 오차를 비교하여 수평이동 방식이 교차방식보다 더욱 정확한 거리 정보를 추정을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제26권6_1호
• /
• pp.1001-1010
• /
• 2023

To solve the problem that photovoltaic panels can not harvest electrical energy at a cloudy day and night, a floating solar thermoelectric generator (FSTEG, hereafter) is studied. The FSTEG is consisted of a dome shaped Fresnel lens to condense solar energy, a thermoelectric module connected with a heat sink to keep temperature difference, a floating system simulating a wavy ocean and an electrical circuit for energy storage. The dome shaped Fresnel lens was designed to have 29 prisms and its optical performance was evaluated outdoors under natural sunlight. Four thermoelectric modules were electrically connected and its performance was evaluated. The generated energy w as stored in a Li-ion battery by using a DC-DC step-up converter. For the application of ocean environment, the FSTEG was covered by the dome shaped Fresnel lens and sealed to float in a water-filled reservoir. The harvested energy shows a potential and a method that the FSTEG is suitable for the energy generation in the ocean environment.

• 방송공학회논문지
• /
• 제28권1호
• /
• pp.79-89
• /
• 2023

다시점 디스플레이는 관찰자의 위치에 따라 적절한 시점의 영상을 제공할 수 있어 시청자에게 입체적인 효과를 줄 수 있는 가장 실용적인 기술로 여겨진다. 하지만 대부분의 다시점 디스플레이는 평면 형태로서 시청자가 전방의 제한된 시야각 내에서만 입체 영상을 볼 수 있는 단점이 있다. 본 논문에서는 시청 영역을 360도로 확장하여 완전 시차 시차를 제공하는 구 대칭성을 가지는 볼 렌즈를 적용한 광학계로 구성된 구형 디스플레이를 제안하였다. 제안한 시스템에서 각각의 프로젝션 렌즈는 소형 모듈화하여 어레이로 구성할 수 있으며 모듈 어레이를 볼 렌즈 주위에 구면으로 배치하여 수직, 수평 시차를 제공할 수 있다. 적용된 광학 모듈을 통해 볼 렌즈 내부 중앙에 이미지가 결상되고, 사용자는 디스플레이의 시야창을 통해 선명한 영상을 시청할 수 있다. 따라서 볼 렌즈의 구면 수차를 극복하여 넓은 시야 부피를 제공하는 360도 완전 시차 디스플레이의 실현 가능성을 실험적으로 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.213-216
• /
• 2005

A novel hyperspectral imaging spectrometer controlling spatial and spectral resolution individually has been proposed. This imaging spectrometer uses a zoom lens as a telescope and a focusing element. It can change the spatial resolution fixing the spectral resolution or the spectral resolution fixing the spatial resolution. Here, we report the concept of the hyperspectral imaging spectrometer with the novel zooming function and the optical design of a zoom lens as the focusing element. By using lens module and third-order aberration theory, we have presented the initial design of four-group zoom lens with external entrance pupil. And the optimized zoom lens with a focal length of 50 to 150 mm is obtained from the initial design by the optical design software. As a result, the designed zoom lens shows satisfactory performances in wavelength range of 450 to 900 nm as a focusing element in an imaging spectrometer. Furthermore, the collimator lens of the imaging spectrometer is designed through the third-order aberration correction by using an iterative process.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.206-212
• /
• 2009

This study presents the compact zoom lens with a zoom ratio of 5x for a mobile camera by using a prism. The lens modules and aberrations are applied to the initial design for a four-group inner-focus zoom system. An initial design with a focal length range of 4.4 to 22.0 mm is derived by assigning the first-order quantities and third-order aberrations to each module along with the constraints required for optimum solutions. We separately designed a real lens for each group and then combined them to establish an actual zoom system. The combination of the separately designed groups results in a system that satisfies the basic properties of the zoom system consisting of the original lens modules. In order to have a slim system, we directly inserted the right-angle prism in front of the first group. This configuration resulted in a more compact zoom system with a depth of 8 mm. The finally designed zoom lens has an f-number of 3.5 to 4.5 and is expected to fulfill the requirements for a slim mobile zoom camera having high zoom ratio of 5x.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 2007

We have developed a compact and cost-effective camera module on the basis of wafer-scale replication technology. A multiple-layered structure of several aspheric lenses in a mobile camera module is first assembled by bonding multiple glass-wafers on which 2-dimensional replica arrays of identical aspheric lenses are UV-embossed, followed by dicing the stacked wafers and packaging them with image sensor chips. We have demonstrated a VGA camera module fabricated by the wafer-scale replication processing with various UV-curable polymers having refractive indices between 1.4 and 1.6, and with three different glass-wafers of which both surfaces are embossed as aspheric lenses having 200 um sag-height and aspheric-coefficients of lens polynomials up to tenth-order. We have found that precise compensation in material shrinkage of the polymer materials is one of the most technical challenges, in order to achieve a higher resolution in wafer-scaled lenses for mobile camera modules.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.193-197
• /
• 2003

As one of the core technologies in the field of the optical communication with WDM, the optical cross connector with movements of micro mirrors is getting important day by day. The packaging structure of 2-dimensional NxN MOEMS switch should be determined by the harmonization of the following items such as the geometrical compatability between optical and structural components, the characteristics of optical input and output parts with device, and the electrical performance for the operation of micro mirrors. Therefore, the packaging process could be defined as the integrated technology completed by the optical and electrical science and the material science for the understanding of its thermo-mechanical properties with packaging materials. In the present study, the harmonization between the optical and structural components as well as the optical characteristics of lens system used will be investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.145-146
• /
• 2006

• 한국산업정보학회논문지
• /
• 제12권3호
• /
• pp.124-131
• /
• 2007

3 Megapixel, 2.5배 Zoom 카메라폰 모듈용 광학계 중 비구면과 평면으로 설계된 평볼록형 비구면 Glass렌즈를 고온압축성형법으로 제작하였다. 제작된 비구면 Glass 성형렌즈의 성능은 성형렌즈의 형상정도(PV) 전사성과 해상도로 평가하였다. Glass렌즈 성형용 몰드의 형상정도(PV)는 비구면의 경우 $0.127\;{\mu}m$, 평면의 경우 $0.168\;{\mu}m$이었고, 성형된 렌즈의 형상정도(PV)는 비구면의 경우 $0.205\;{\mu}m$, 평면의 경우 $0.223\;{\mu}m로 $90{\sim}95%$의 전사정도를 보였다. 성형렌즈의 해상도 평가를 위해 렌즈의 MTF[Contrast]를 측정하였다. 공간주파수 80 lp/mm에서 Contrast가 32.9%을 보였으며, 이 값은 렌즈 광학설계의 전산모사에서 얻어진 Contrast 33%에 근사한 값으로 성형렌즈의 해상도 특성이 우수함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.57-57
• /
• 2007

Aspheric glass lenses have many optical advantages, for glass have superior optical performance and an aspheric form can reduce optical aberrations. Recently, the use of it is rapidly expanding as the mass production becomes possible by glass molding press and so this method is considered as the best method for fabricating an aspheric glass lens, but it is difficult to control many parameters for pressing and cooling process. Design of experiments (DOE) is a very useful tool to design and analyze complicated industrial design problems. This study investigated the pressing conditions to mold aspheric glass lenses for mega pixel phone camera module using DOE method. We have applied fractional factorial design and the response variable was set form accuracy (PV) of aspheric surface of molded lens. The results of analysis indicates that all factors expect for pressing force of each step are available for the form accuracy (PV). It was the optimum condition of the designed pressing conditions for lowering the form accuracy(PV) value of molded lens that all factors were at the low level. The form accuracy (PV) of mold and molded lens under the optimum condition are $0.85\;{\mu}m$ and $0.922\;{\mu}m$ respectively.