• 한국정보전자통신기술학회논문지
• /
• 제6권1호
• /
• pp.51-56
• /
• 2013

본 논문에서는 LED 조명을 기반으로 미디어 전송기법 가시광통신 시스템 모듈 설계 및 효율 연구와 성능분석을 하였다. 고휘도 Withe LED조명을 이용한 가시광통신(Visible Light Communication) 송 수신기 모듈을 통해 미디어 전송 시스템을 구현하기 위해 송신부에는 1~12개의 LED 발광 소자와 수신부에는 PD(Photo Diode)센서를 구성하여 전송속도에 따른 최대 송 수신의 통신 거리를 실험해 보고자 가시광통신 시스템을 제안하였다. 또한 미디어 전송 시스템의 효율을 증대시키기 위해 LED모듈에 렌즈 착용시와 미착용시 각각의 성능을 측정하여 약 20%의 효율이 증가하였음을 확인 할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.552-554
• /
• 1995

In long-haul high speed optical communications, the distance between a transmitter and a receiver depends on the amount of light coupled to a single mode optical fiber from the laser diode(LD) as well as the LD characteristic itself. And the transmitter module must have long lifetime. high reliability, and even simple structure. Such points have induced laser welding technique to be a first choice in opto-electronic module packaging because it can provide strong weld joint in a short time with very small coupling loss. In this paper, packaging considerations and characteristics for high speed LD modules are discussed. They include optical path design factors for larger aligning tolerance, and novel laser welding processes for component assembly. For low coupling loss after laser welding processes, the optical path for optimum coupling of a single mode optical fiber into the LD chip was designed with the GRIN lens system providing sufficiently large aligning tolerance both in the radial and axial directions. The measured sensitivity of the LD module was better than -33.7dBm(back to back) at a BER of $10^{-10}$ with a 2.5Gbps NRZ $2^{23}-1$ PRBS.

• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.70-74
• /
• 2011

The mobile camera module is a device to be inserted in the digital device for camera feature. The mobile camera module is being shaken by vibrations such as handshake during the exposure time. The clarity is compromised by these vibrations, thus the vibration is considered as an external disturbance. Moreover the use of mobile camera module has been being expanded for automotive vibration should be considered. These external disturbances can cause image blurring, thus optical image stabilization should be applied for image compensation. The compensator is fulfilled mechanically by movable lens group or image sensor that adjusts the optical path to the camera movement. Open loop control is useful for well-defined systems like compliant mechanism. Notch filter and lead compensator are designed and applied to improve the stability and bandwidth. The final level of image compensating is confirmed by image processing with MATLAB and CODE V to verify the better performance.

• 한국광학회지
• /
• 제26권5호
• /
• pp.269-274
• /
• 2015

본 논문에서는 code V 시뮬레이터를 이용하여 광 HDMI 인터페이스에 적용하기 위한 집적형 2채널 TO 구조 광송신기의 광학계 설계를 하였다. 제안된 집적형 2채널 TO 구조 광송신기는 지름의 6.4 mm인 하나의 8 pin TO-CAN 패키지 안에 2개의 VCSEL을 평행하게 부착하고 그 위에 반구(hemisphere) 렌즈가 부착된 직육면체 모양($1mm(H){\times}2mm(W){\times}4mm(D)$)의 렌즈필터 블록 (lens filter block) 을 올려놓은 구조이다. 집적형 2채널 TO 구조 광송신기 제작 시 1060 nm/1270 nm와 1330 nm/1550 nm로 두 개 파장씩 묶어 TO-CAN 형태로 제작하므로, 이들 파장 조합에서 반구 렌즈의 지름은 0.6 mm, 볼 렌즈와 렌즈 필터 간격(L)은 파장 1060 nm/1270 nm 조합의 경우 1.7 mm, 파장 1330 nm/1550 nm 조합의 경우 2.0 mm일 때 최적의 결과를 얻을 수 있었다. 이때 렌즈필터 블록의 초점거리($f_0$)는 1060 nm, 1270 nm, 1330 nm, 1550 nm 파장에 대하여 0.351 mm, 0.354 mm, 0.355 mm, 0.359 mm이었으며 렌즈 필터 블록과 볼 렌즈를 통과한 빛의 초점 위치(F)는 파장 1060 nm/1270 nm 조합의 경우 0.62 mm, 파장 1330 nm/1550 nm 조합의 경우 0.60 mm ~ 0.66 mm이었다.

• 한국광학회지
• /
• 제33권6호
• /
• pp.317-323
• /
• 2022

본 논문에서는 투명한 물질의 두께를 측정하기 위한 방법으로 기하 위상 렌즈 기반의 색공초점 센서를 개발하고, 성능 개선을 위한 보정 방법을 제시한다. 일반적인 색공초점 센서의 복잡한 설계로 인한 한계를 극복하기 위해, 기하 위상 렌즈를 이용하여 전체 시스템의 크기를 줄이고, 시스템 오차를 보상하기 위한 파장 첨두 위치 추출 방법과 계통 오차 제거 방법을 설명한다. 색공초점 센서를 이용하여 투명한 물질의 두께를 측정하기 위한 이론을 설명하고, 이를 사파이어 및 BK7 물질의 두께를 측정함으로써 실험적으로 검증한다. 색공초점 센서를 이용한 두께 측정 방법은 기존의 간섭계 및 공초점 센서의 방법들에 비해 측정 속도가 빠르고, 분산 등에 의한 두께 측정 영역 제한이 없기 때문에 많은 응용이 가능하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.425-426
• /
• 2006

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1112-1118
• /
• 2007

We propose a new-focusing method for test handlers of compact camera module (CCM), The MMD (max-min difference) method is applied to calculate the focus value quickly considering the noisy output of CCM. Also, the fuzzy search method is applied to find the maximum focus value effectively. We design a fuzzy processor to control the lens position by focus values and brightness values, which improves the focusing performance in the sense of speed and processor memory. The proposed method is implemented by computer program and installed at the CCM test handler machines. The simulation results are presented to verify the usefulness of the proposed method.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.629-634
• /
• 2013

This study aims to investigate a new structure for a concentrating photovoltaic (PV) module using a III-V compound semiconductor solar cellto solve the problems of existing concentrating PV modules and to explore a concentrating optical system with a flat structure, which shows remarkable advantages in terms of manufacturing cost, installation, and maintenance. This study should greatly contribute toward the development of concentrating PV modules. This study was performed to achieve an improvement in efficiency and economy and to implement an actual product. A new source of renewable energy is the only way in which countries that cannot produce oil can even emerge as an energy power. Therefore, this work can serve as a fundamental study that will help South Korea grow into a country that is a PV power generation force.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.104-107
• /
• 2005

COMS(Communication, Ocean, and Meteorological Satellite) is the geostationary satellite for the mission of satellite communication, ocean monitoring, and meteorological service. It is scheduled to be launched at the end of 2008. Ocean payload of COMS named as GOCI(Geostationary Ocean Color Imager) observes ocean color and derives the chlorophyll concentrlition, the concentration of dissolved organic material and so on. In operational oceanography, satellite derived data products are used to provide forecasting and now casting of the ocean and coastal water state. In this work, conceptual design of structural part of GOCI is carried out and two baseline concepts are proposed. The one is dioptric module that uses lens system and the other is TMA(Three Mirror Anastigmat) module that uses mirror system. Trade-off studies between two concepts are investigated by considering optical and mechanical performances. Finally, on-going tasks and future development plan are briefly discussed.