• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.67-76
• /
• 2017

In this study, the effect of caisson heel on the active earth pressure is investigated. Using limit analysis method, inclinations of slip surface developed above the heel with different lengths are analyzed. The shorter the heel length, the larger those of inside slip surface, however those of outside slip surface are not changed. According to the relative heel length, relationships of internal friction angle of backfill material - wall friction angle between caisson structure and backfill - friction angle acting on virtual section at the end of heel are presented. Earth pressures acting against caisson structure with relatively short heel are smaller than Rankine earth pressure but always greater than Coulomb earth pressure which does not consider the heel length.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.312-321
• /
• 2020

Morphology of porous cobalt electro-deposits was systematically investigated as functions of cobalt precursors in the plating bath and applied cathodic current density with a special focus on cobalt nano-rod formation. It was proved that the concentration of cobalt precursor plays little effect on the morphology of cobalt electro-deposits at relatively low plating current density while it significantly affects the morphology with increasing plating current density. Such a dependence was discussed in terms of the kinetics of two competitive reactions of cobalt reduction and hydrogen evolution. Cobalt nano-rod structure was created at specific ranges of cobalt precursor content and applied cathodic current density, and its diameter and length varied with plating time without notable formation of side branches which is usually found during dendrite formation. Specifically, the nano-rod length was preferentially increased in relative short plating time (<15 s), resulting in higher aspect ratio of nano-rod with plating time. Whereas, both the nano-rod length and diameter were increased nearly at the same level in a prolonged plating time, making the aspect ratio unchanged. From the analysis of crystal structure, it was confirmed that the cobalt nano-rod preferentially grew in the form of single crystal on a dense poly-crystalline cobalt thin film initially formed on the substrate.

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.420-429
• /
• 2022

In this paper, the details and design process of an optical system for space target detection cameras are introduced. The whole system is divided into three structures. The first structure is a short-focus visible light system for rough detection in a large field of view. The field of view is 2°, the effective focal length is 1,125 mm, and the F-number is 3.83. The second structure is a telephoto visible light system for precise detection in a small field of view. The field of view is 1°, the effective focal length is 2,300 mm, and the F-number is 7.67. The third structure is an infrared light detection system. The field of view is 2°, the effective focal length is 390 mm, and the F-number is 1.3. The visible long-focus narrow field of view and visible short-focus wide field of view are switched through a turning mirror. Design results show that the modulation transfer functions of the three structures of the system are close to the diffraction limit. It can further be seen that the short-focus wide-field-of-view distortion is controlled within 0.1%, the long-focus narrow-field-of-view distortion within 0.5%, and the infrared subsystem distortion within 0.2%. The imaging effect is good and the purpose of the design is achieved.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.1
• /
• pp.31-52
• /
• 2024

Considering the significant relationship between a tree's branch structure and physiology, understanding the detailed branch structure is crucial for fields such as species classification, and 3D tree modelling. Recently, terrestrial laser scanning (TLS) and quantitative structure model (QSM) have enhanced the understanding of branch structures by capturing the radius, length, and branching angle of branches. Previous studies examining branch structure with TL S and QSM often relied on mean or median of branch structure parameters, such as the radius ratio and length ratio in parent-child relationships, as representative values. Additionally, these studies have typically focused on the relationship between trunk and the first order branches. This study aims to explore the distribution of branch structure parameters up to the third order in Aesculus hippocastanum, Ginkgo biloba, and Prunus yedoensis. The gamma distribution best represented the distributions of branch structure parameters, as evidenced by the average of Kolmogorov-Smirnov statistics (radius = 0.048; length = 0.061; angle = 0.050). Comparisons of the mode, mean, and median were conducted to determine the most representative measure indicating the central tendency of branch structure parameters. The estimated distributions showed differences between the mode and mean (average of normalized differences for radius ratio = 11.2%; length ratio = 17.0%; branching angle = 8.2%), and between the mode and median (radius ratio = 7.5%; length ratio = 11.5%; branching angle = 5.5%). Comparisons of the estimated distributions across branch orders and species were conducted, showing variations across branch orders and species. This study suggests that examining the estimated distribution of the branch structure parameter offers a more detailed description of branch structure, capturing the central tendencies of branch structure parameters. We also emphasize the importance of examining higher branch orders to gain a comprehensive understanding of branch structure, highlighting the differences across branch orders.

• Communications of the Korean Mathematical Society
• /
• v.27 no.4
• /
• pp.653-664
• /
• 2012

We study the abstract structure of the automorphism group of the ternary self-dual code of length 8 and give its convenient presentation by generators.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.184-185
• /
• 2005

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.769-772
• /
• 2016

In this paper, the overhang structure was applied to the axial flux permanent magnet (AFPM) motor. This paper describes the overhang effect in the AFPM motor. Moreover, the overhang effect was analyzed according to the different overhang length and an optimal overhang structure was proposed. Finally, the proposed structure was applied to design, analysis and experiment of prototype motors. Through the comparison between 3D finite element analysis results and experimental ones, the validity of proposed structure is clarified.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.293-296
• /
• 2007

This study investigated the out-of-plane elastic buckling load and effective length factor of X-bracing system. The members of X-bracing system which are studied in this paper are rigidly attached to the structure at their end connections, and are pinned or rigidly connected at their point of intersection. The effective length factors are derived for the general case where the tension and compression brace have different material and geometrical properties.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.305-309
• /
• 2011

We present an efficient design approach for a plasmonic slot waveguide using a genetic algorithm. The analyzed structure consists of a nanometric slot in a thin metallic film embedded within a dielectric. To achieve high confinement without long propagation length, the thickness and width of the slot are optimally designed in order to optimize the figures of merit including mode confinement and propagation length. The optimized design is based on the finite element method and enhances the guiding and focusing of light power propagation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1129-1134
• /
• 2006

In this paper, we analyze the cycle structure of punctured finite-length RA-type LDPC codes and design interleavers which have good memory efficiency and avoid short cycles. Furthermore, we introduce the check-node merging scheme for punctured finite-length RA-type LDPC codes and design simple interleavers. Simulation results show that punctured finite-length RA-type LDPC codes using the proposed simple interleavers have better performance than those with random and S-random interleavers.