• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.96-103
• /
• 2006

To establish of standard technique of nano-length measurement in 2D plane, new AFM system has been designed. In the long range (about several tens of ${\mu}m$), measurement uncertainty is dominantly affected by the Abbe error of XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motion. In this paper, an AFM system with minimum offset of XY sensing is designed. And XY scanning stage is designed to minimize rotation angle because Abbe errors occur through the multiply of offset and rotation angle. To minimize the rotation angle optimal design has performed by maximizing the stiffness ratio of motion direction to the parasitic motion direction of each stage. This paper describes the design scheme of full AFM system, especially about XY stage. Full range of fabricated XY scanner is $100{\mu}m\times100{\mu}m$. And tilting, pitch and yaw motion are measured by autocollimator to evaluate the performance of XY stage. As a result, XY scanner can have good performance. Using this AFM system, 3um pitch specimen was measured. The uncertainty of total system has been evaluated. X and Y direction performance is different. X-direction measuring performance is better. So to evaluate only ID pitch length, X-direction scanning is preferable. Its expanded uncertainty(k=2) is $\sqrt{(3.96)^2+(4.10\times10^{-5}{\times}p)^2}$ measured length in nm.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제20권2호
• /
• pp.163-175
• /
• 2017

본 연구는 평면 도형의 도형 분류하기 과제를 제시할 때 길이와 각의 표기 여부가 도형의 개념 이해에 어떤 영향을 주는지 알아보는데 목적이 있다. 이를 위해, 초등학교 4학년 학생 33명을 대상으로 분류하기 과제 해결 과정을 Eye-tracker를 통해 녹화하고 정답률과 Gaze Duration을 중심으로 분석하였다. 그 결과, 이등변삼각형과 정삼각형의 분류하기에서는 길이를 제시하였을 때 정답률이 증가하고 Gaze Duration은 감소하였다. 예각삼각형과 둔각삼각형 과제에서도 직각을 표기했을 때 정답률이 증가하고 Gaze Duration이 감소하였다. 이러한 결과로 볼 때, 평면도형을 분류하는 과제를 제시할 때는 길이와 각을 표기하여 학생들이 어림하여 도형을 분류하기 보다는 도형의 개념 이해를 바탕으로 분류하는 것을 측정하는 데 초점을 두어야 할 것이다.

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.74-80
• /
• 2005

물체의 형상검사를 위한 검사 방법 가운데 광삼각법을 이용한 레이저 삼각검사 방식은 원격 비접촉식의 고정밀, 고속 측정이 가능하다는 장점이 있다. 이러한 레이저 삼각측정 방식은 평면뿐만 아니라 경사면에 위치한 홀의 길이를 측정하는데 이용하고 있다. 그러나 기존의 방식으로는 렌즈의 초점 거리가 정해져 있었으므로 한정된 영역만을 측정할 수 있다는 단점이 있었다. 이러한 문제는 CCD 카메라와 측정 대상체 사이의 거리를 변화시키는 간단한 방법으로 해결할 수 있다. 이를 원리로 좀더 효율적인 방식을 채택한 것이 가변적인 초점 거리를 갖는 줌 렌즈를 사용하는 방법이다 주 논문에서는 가변적인 초점 거리를 갖는 줌렌즈를 사용함으로써 측정 물체의 크기에 따라 렌즈 배율을 최적화하여 개선된 분해능을 갖는 형상측정 시스템을 제안하였고 정밀도의 향상을 실험적으로 실증하였다.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.309-315
• /
• 2013

This study examines the difference of surface properties according to napping characteristic of artificial suedes, measuring surface structure observation, the contact/non-contact method roughness, warm-cool feeling of touch, and subjective hand evaluation. Surface and cross-section observations showed a discernible difference in fineness, curl, length, mount of napping, and covering power of base fabric. The surface properties of artificial suede evaluated by KES-FB4 showed that the shorter napping length the more smooth surface and the roughness increased reciprocally with friction resistance and surface contour when the nap length reaches a high level. The surface roughness measuring system applied a laser displacement sensor by a non-contact method to assess napping characteristic and the base fabric and napping height. Surface roughness decreased when napping was uniformly covered with base fabric; however, the surface roughness increased specifically with the uneven covering power of the base fabric. For qmax of the suedes, those that had short and smaller amounts of napping increased; however, the napping of length and amount at some stage generated a low qmax value. The warm sensation in all suedes were strongly perceived, but the cool sensation of the perception was lower in the subjective evaluation. Smoothness and softness were perceived when the suede has a long and large amount napping; however, smoothness and hardness were perceived when the suede was short and with the uneven covering power.

• 한국방사선학회논문지
• /
• 제9권6호
• /
• pp.349-356
• /
• 2015

본 연구는 TW3법에서 골성숙 가중치가 가장 높은 7부위를 선정하여 성장판과 골 말단부 사이의 길이를 측정하여 연령과의 상관관계를 알아보고자 하였다. 실험은 2014년 3월에서 2015년 3월까지 성장판검사를 시행한 소아 72명(남 36명, 여 36명)을 대상으로 하였으며, 소아 손 전후영상에서 성장판과 골 말단부 사이의 길이를 측정하여 회귀분석을 하였다. 그 결과 각 연령마다 특정범위에 상응하는 평균과 표준편차 값이 나타났으며, 연령이 증가할수록 성장판과 골 말단부 사이 길이가 감소하였다. 또한 여아가 남아에 비해 평균값이 작게 나타났으며, 회귀분석 결과에서 성장판과 골 말단부 부위 측정 길이와 연령이 통계적으로 유의(p<0.001)한 것으로 나타났다. 따라서 소아 손 전후영상에서 TW3법의 응용을 통한 회귀방정식으로 골연령의 예측이 가능함을 알 수 있었다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2391-2397
• /
• 1993

The distribution of fatigue crack growth rate is influenced by the measuring interval and methods of calculation of crack growth rate. The purpose of this paper is to suggest a method for the evaluation of crack growth rate distribution without the influence. The constant ${\Delta}P$ test and the constant .DELTA.K test are executed by using the CT specimen. The measuring interval of (${\Delta}a$/W=0.0067~0.014) crack length is not affected by methods of the calculation of the fatigue crack growth rate is suggested.

• 한국분무공학회지
• /
• 제7권4호
• /
• pp.9-15
• /
• 2002

Convolution Fourier transformation tomographically reconstructs the spatially resolved spray injection rate from direct measuring cells. Asymmetric sprays generated from a twin-hole air shroud injector are tested with 12 equiangular projections of measurements. For each projection angle, line of sight integrated injection rate was measured at 35 positions with equal spacing measuring cells of 3 mm in width, 100 mm in length, 55 mm in depth and 0.5 mm thickness of separating wall. Interpolated data between the projection angles effectively increase the number of projections, which significantly enhances the signal-to-noise level in the reconstructed data. This modified convolution Fourier transformation scheme predicts well the structure of asymmetric sprays. Comparative study has been made between sprays with and without air shrouding. Tomograhpic reconstruction of injection rate from direct measuring cells obtained can be used to estimate the accuracy of volume fraction of spray from the LDPA tomographic reconstruction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1139-1143
• /
• 1991

Using industrial robots and sensors, we developed an inline car body inspection system which proposes high flexibility and sufficient accuracy. Car Body Inspection(CBI) cell consists of two industrial robots, two corresponding carriages, camera vision system, a process computer with multi-tasking ability and several LDS's. As industrial robots guarantee sufficient repeatabilities, the CBI cell adopts the concept of relative measurement instead of that of absolute measurement. By comparing the actual measured data with reference data, the dimensional errors of the corresponding points can be calculated. The length of the robot arms changes according to ambient temperature and it affects the measuring accuracy. To compensate this error, a robot arm calibration process was realized. By measuring a reference jig, the differential changes of the robot arms due to temperature fluctuation can be calculated and compensated.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.53-54
• /
• 2005

This paper describes that send some signal from encoder attached to crankshaft of marine-engine to measuring instrument using power line modem(PLM) and display cylinder pressure, rpm and etc. on LCD. Conventional method that sends signal along the long signal line has some inconvenience from too long signal line length caused by huge volume of ship's engine. Power line modem can have short signal line from outlets to measuring instrument. Because it use exist power line for send signals, so it have low installation cost and could have good merits in job sites. Through this experiment, pressure in cylinder, engine rpm and etc. signals through PLM are well recognized at measuring instrument.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.251-257
• /
• 1998

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate.