• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제12B권1호
• /
• pp.7-12
• /
• 2002

This paper presents a method to estimate an effective length of a 1000-kVA superconducting generator using three-dimensional FE analysis. Flux linkage of stator coil and the induced voltage are calculated with FEM program and Faraday's law. An effective length of the stator coil is estimated using the calculated voltage and geometric configurationn of the machine. In order to verify the estimation method, 30-kVA superconducting generator is built and tested. The test result agrees reasonably well with the estimation.

• 한국건설관리학회논문집
• /
• 제24권5호
• /
• pp.83-94
• /
• 2023

In order to devise a rebar usage optimization algorithm, it is necessary to calculate the exact rebar length and revise the arrangement of rebars into special lengths. However, the process of rearranging numerous rebars and manually calculating their quantities is time-consuming and requires significant human resources. To address this challenge, it is necessary to develop an algorithm that can automatically estimate the length of rebars and calculate their quantities. This study aims to create an automatic estimation algorithm that improves work efficiency while ensuring accurate and reliable calculations of rebar quantities. The algorithm considers various factors such as concrete cover, hook length, development length, and lapping length, mandated by the building codes, to calculate the quantity of rebars for wall structures. The effectiveness of the proposed method is validated by comparing the rebar quantities generated by the algorithm with manually calculated quantities, resulting in a difference rate of 1.14% for the hook case and 1.37% for the U-bar case. The implementation of this method enables fast and precise estimation of rebar quantities, adhering to relevant regulatory codes.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.67-72
• /
• 2009

The flux cored arc welding (FCAW) process is one of the most frequently employed and important welding process due to high productivity and excellent workability. The process is performed either as an automated process or as a semi-automatic process. In FCAW process, welding voltage has been considered as a qualitative indication of arc length. But it is necessary to let welding operators know, maintain and manage the arc length directly by estimating and displaying it. In this study, to develop arc length estimation technique, we measured a welding circuit resistance($R_sc$) and then we calculated welding circuit voltage drop($V_sc$). Also, we measured arc peak voltage($V_ap$). By subtracting $V_sc$ from $V_arc$, we can easily calculate net arc voltage drop($V_arc$). Consequently, we suggested arc length estimating equation and basic algorithm by regressive analyzing the relationship between net arc voltage drop($V_arc$) and real arc length(Larc) measured by high speed camera. Therefore, arc length can be predicted by just monitoring welding current and voltage.

• 한국가스학회지
• /
• 제15권2호
• /
• pp.27-32
• /
• 2011

본 논문에서는 자기 누설 탐상법을 이용하여 획득한 자기 누설 신호에 SQI(self quotient image)를 적용하여 지하에 매설된 가스 배관에 발생한 결함의 길이를 추정하는 방법을 소개한다. 자기 누설 탐상 시스템(MFL)이 지나간 가스 배관은 탐상 시스템의 영구 자석에 의해 착자(magnetization) 된다. 착자된 가스 배관에 결함이나 부식 등의 손상이 있을 경우 손상 부위에서는 누설 자속이 증가한다. 본 논문에서는 자기 누설 탐상 시스템의 홀센서를 이용하여 누설 자속을 계측한 후 SQI를 적용하여 결함의 길이를 추정한다. 한국가스공사(KOGAS)의 모의 시험 배관(KPSF)에 설치된 74개의 인공결함에 대해 제안한 알고리즘과 기존의 결함 길이 추정 알고리즘들의 성능을 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.502-507
• /
• 2003

Toward the development of practical methods for observed data oriented bispectral estimation, an automatic means for determining the smoothing bandwidth of bispectral windows is proposed, that can also provide an associated optimum bispectral estimate of stationary non-Gaussian signals, systematically only from an observed time series datum of finite length. For the conventional non-parametric bispectral estimation, the MSE (mean squared error) of the normalized estimate is reviewed under a certain mixing condition and sufficient data length, mainly from the viewpoint of the inverse relation between its bias and variance with respect to the smoothing bandwidth. Based on the fundamental relation, a systematic method not only for determining the bandwidth, but also for obtaining the optimum bispectral estimate is presented by newly introducing a MSE evaluation index of the estimate only from an observed time series datum of finite length. The effectiveness and fundamental features of the proposed method are illustrated by the basic results of numerical experiments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.84-85
• /
• 2014

Green frame is column-beam structure composed of precast concrete members. Based on Revision of Structural Concrete Design Code, the bottom rebar of beam shall be extend at least 150mm into the support member. However, if the bottom rebar extend to satisfy Revision of Structural Concrete Design Code, the installation fo beam is impossible due to interference between the columns and beams. Thus, the aim of this study is estimation of production length of precast concrete beam by using splice length of bottom rebar. In this study to solve this problem, lap splice were used on the join. This study was calculated length of the reinforcement by the diameter. According to the length of the rebar, the production length of beam concrete was calculated. The results of this study will satisfy the Revision of Structural Concrete Design Code about column-beam connection when green frame will be applied.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.247-250
• /
• 2006

Based on the possibility theory and the fuzzy set, the Maximum Possibility Estimation method and its applications in kinematic GPS positioning are presented in this paper. Firstly, the principle and the optimal criterion of the Maximum Possibility Estimation method are explained. Secondly, the kinematic GPS positioning model of single epoch single frequency with baseline length constraint is developed. Then, the authors introduce the artificial immune algorithm and use this algorithm to search the global optimum of the Maximum Possibility Estimation model. The results of some examples show that the method is efficient for kinematic GPS positioning.

• 보건행정학회지
• /
• 제5권2호
• /
• pp.18-34
• /
• 1995

To clarify the relationship between the medical supply(medical persons and goods) and the use of bed, the author has made comparison among OECD 24 countries. Per Capita Bed-days can be divided into Average Length of Stay and Admission Rate, and these three variables were regressed upon both In-patient Care Beds of all medical institutions including acute somatic, psychiatric, special, nursing homes and other long-term care and Share of Total Health Employment in Total Employment. The result of regression analysis shows a statistically significant positive relationship between In-patient Care Beds and Average Length of Stay, and negative relationship between Share of Total Health Employment and Admission Rate. In addition to Ordinary Least Square(OLS) estimation, amended Bounded Influence Estimation(BIE) was also made to adjust the influence of outliers. Japan shows a very large number of In-patient Care Beds and a very low Share of Total Health Employment, and this medical situation is judged to have close relation to her long Average Length of Stay and low Admission Rate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.167-168
• /
• 2023

Construction of reinforced concrete structures required massive amounts of concrete and steel rebar. The current procedure to estimate the quantity of rebar requires tedious and time-consuming manual labor. Consequently, this circumstance made the engineers vulnerable to error and mistake, which led to the rebar waste. No system that is capable of automatically calculating rebar length has yet been developed Thus, this study proposes a preliminary investigation of automatic rebar length estimation of beam element by using BIM-based shape codes drawn in Revit. Beam is chosen due to its complexity in the rebar arrangement. In addition, the development of this study could assist engineers on the construction site and effectively contribute to the minimization of rebar waste in the future.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.200-208
• /
• 2009

H.264/AVC의 매크로블록 단위의 비트율 제어 방법은 부적당한 양자화 파라미터 할당으로 인해 한 프레임에 할당된 목표 비트가 일찍 고갈되곤 하는 문제가 있다. 이 경우 잔여 매크로블록들을 부호화 하기 위해 제한 범위내의 가장 큰 양자화 파라미터가 사용되고 화질 저하로 이어진다. 또한 양자화 파라미터의 할당을 위해 사용되는 헤더 비트량 예측도 이전 프레임과 현재프레임의 부호화된 매크로블록들의 헤더 비트량의 평균으로 구해진다. 따라서 실제 발생하는 헤더 비트량과 오차가 크다. 본 논문에서는 현재 프레임에서 부호화 도중 발생하는 조기 목표 비트 고갈을 막기 위해 이전 프레임들에서 음수 목표 비트를 갖는 매크로블록의 수를 이용한 적응적 양자화 파라미터 결정 방법과 정확한 양자화 파라미터 결정을 위해 향상된 헤더 비트량 예측 방법을 제시한다.