• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.524-529
• /
• 2012

This paper proposes a novel control strategy of a PV tracking system considering the shadow influence. If distance of between PV arrays is not enough, shadow can be occurred to PV module. In PV system, if shadow is occurred to PV modules then PV modules operates reverses bias, and will eventually cause hot-spot and loss. To reduce loss by shadow influence, this paper proposes shadow compensation algorithm using distance between arrays and shadow length of array. The distance between arrays is calculated by using azimuth of solar, and length of array shadow is calculated using by altitude of solar. The shadow compensation algorithm proposed in this paper compares distance between arrays and length of array shadow. When the shadow length is longer than the distance between arrays, the algorithm adjusts altitude of array to avoid the shadow effects. The control algorithm proposed in this paper proves validity through compared with conventional algorithm and proposes experiment result.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.994-1002
• /
• 2008

In this paper a novel tracking system is described, regarding the influence of shadow between array, aimed at improving the efficiency of PV tracking system. Comparing with a building site versus capacity power, domestic solar powers have a limited siting. Therefore, each array interferes with the shadow of other arrays. The loss by influence of those shadow can be compensated for by means of control algorithm of the tracking device. The paper suggests a method controlling an altitude for length which is received the shadow influence of PV array. By using an azimuth of current solar position and the length between arrays, the controller of tracking device is able to calculate the length between actual arrays and make a comparison of the shadow length at a specific time with the length between arrays. When the shadow length is longer than the length between arrays, the controller of tracking device can adjust a position by compensating error altitude of the length between arrays at an altitude of current solar position. In the paper, we develop the control algorithm able to minimize the loss caused by the influence of shadow on the PV tracking system, and compared this with conventional output system. The controller has been tested in the laboratory with proposed algorithm and shows excellent performance.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.174-177
• /
• 2003

The automatic temperature control valve is used to control the flow rate of heating water in the large apartment complex and buildings. It is important to have simillar heating flow rate in the apartments, even though the apartment is top or bottom floors. To achieve those purposes, the automatic flow-temperature control valve was developed. The perfromance of this control valve is effected by the catridge shape and spring length. The flow capacity of this control valve is obtained with the different shape of catridges and with change of spring length.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.4
• /
• pp.334-340
• /
• 2013

Using a relationship between step length and accelerometer output, step length can be estimated. In this paper, we propose a new step length estimation algorithm, which can be used both for the plane and the slope by compensating the slope angle. The slope angle is estimated using a barometer and the slope angle is compensated by observing how the slope affects the step length estimation. The proposed algorithm is verified using five adult man walking data, where the average length error is about 3% regardless of the slope.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.04a
• /
• pp.7-14
• /
• 2004

In this paper, we present an effective method for process control using the Demerit-EWMA control chart in the process where nonconforming units or nonconformities are occurred by various types. We compare performance of Demerit control chart, Demerit-CUSUM control chart and Demerit-EWMA control chart based on the average run length.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.431-439
• /
• 2004

In this paper, we present an effective method for process control using the Demerit-EWMA control chart in the process where nonconforming units or nonconformities are occurred by various types. We compare performance of Demerit control chart, Demerit-CUSUM control chart and Demerit-EWMA control chart based on the average run length(ARL).

• Journal of Acupuncture Research
• /
• v.22 no.2
• /
• pp.141-146
• /
• 2005

Objectives: To investigate the effect of Ginseng herbal acupuncture at GB39 and ST36 on growth in mice. Methods: Mice were divided into four groups (n=10); G-ST36 group treated with Ginseng Radix herbal acupuncture at right ST36, G-GB39 group treated with the same at GB39, Control-ST36 group and Control-GB39 group injected with saline at right ST36 and GB39 respectively. The saline injection and herbal acupuncture were performed 3 times a week for 3 weeks. The length( total height, body length and tail length), weight and the protein efficiency ratio were measured as well as IGF-I level in serum Results: The weights of Ginseng herbal acupuncture groups were not significantly increased compared to the control groups but the protein efficiency ratios were significantly higher in Ginseng herbal acupuncture groups compared to the control groups. The increases of the total length, body length and tail length were significantly higher in Ginseng herbal acupuncture groups than the control groups. The serum IGF-I level of G-GB39 was significantly increased compared to control-GB39, not that of G-ST36 compared to control-ST36. Conclusions: Ginseng herbal acupuncture at GB39 and ST36 are both effective to promote growth in terms of height and weight. GB39 may be effective for growth by way of increasing IGF-I, and more closely related to growth in height than ST36.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.31-35
• /
• 2010

The Ring Laser Gyroscope makes use of the Sagnac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. The space launch vehicle use require the high accuracy Gyro to control and determine the altitude to deliver the satellite in the space. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller is described. The Design for Path Length Controller is composed of the demodulator, integrator, phase shifter, high voltage amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.341-343
• /
• 2009

The Ring Laser Gyroscope makes use of the Sagnac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. The Low Earth Orbit satellite for observatory use require the high accuracy Gyro to control and determine the altitude because of the need of payload pointing accuracy. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller Is described. The Design for Path Length Controller is composed of the demodulator, integrator, phase shifter, high voltage amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.256-260
• /
• 2008

The Ring Laser Gyro makes use of the Sagnac effect within a resonant ring cavity of A He-Ne laser and has more accuracy than the other Gyros. The Low Earth Orbit satellite for observatory use require the high accuracy Gyro to control and determine the altitude because of the need of payload pointing accuracy. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller is described. The Design for Path Length Controller is composed of the demodulator, Integrator, Phase shifter, High Voltage Amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.