• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.442-448
• /
• 2008

This paper presents an approach to define an optimal piezoactuator length to actively control structural vibration. The optimal ratio of the piezoactuator length against beam length when a pair of piezoceramic actuator and accelerometer is used to suppress unwanted vibration with direct velocity feedback (DVFB) control strategy is not clearly defined so far. It is well known that direct velocity feedback (DVFB) control can be very useful when a pair of sensor and actuator is collocated on structures with a high gain and excellent stability. It is considered that three different collocated pairs of piezoelectric actuators (20, 50 and 100 mm) and accelerometers installed on three identical clamped-clamped beams (300 * 20 * 1 mm). The response of each sensor-actuator pair requires strictly positive real (SPR) property to apply a high feedback gain. However the length of the piezoactuator affects SPR property of the sensor-actuator response. Intensive simulation and experiment shows the effect of the actuator length variation is strongly related with the frequency range of SPR property. A shorter actuator gave a wider SPR frequency range as a longer one had a narrower range. The shorter actuator showed limited control performance in spite of a higher gain was applied because the actuation force was relatively small. Thus an optimal length ratio (actuator length/beam length) was suggested to obtain relevant performance with good stability with DVFB strategy. The result of this investigation could give important information in the design of active control system to suppress unwanted vibration of smart structures with piezoelectric actuators and accelerometers.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.236-242
• /
• 2003

ATM ABR service controls network traffic using feedback information on the network congestion situation in order to guarantee the demanded service qualities and the available cell rates. In this paper we apply the control method using queue length prediction to the formation of feedback information for more efficient ABR traffic control. If backward node receive the longer delayed feedback information on the impending congestion, the switch can be already congested from the uncontrolled arriving traffic and the fluctuation of queue length can be inefficiently high in the continuing time intervals. The feedback control method proposed in this paper predicts the queue length in the switch using the slope of queue length prediction function and queue length changes in time-series. The predicted congestion information is backward to the node. NLMS and neural network are used as the predictive control functions, and they are compared from performance on the queue length prediction. Simulation results show the efficiency of the proposed method compared to the feedback control method without the prediction. Therefore, we conclude that the efficient congestion and stability of the queue length controls are possible using the prediction scheme that can resolve the problems caused from the longer delays of the feedback information.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1185-1191
• /
• 2008

This paper presents an approach to define an optimal piezoactuator length to actively control structural vibration. The optimal ratio of the piezoactuator length against the beam length when a pair of piezoceramic actuator and accelerometer is used to suppress unwanted vibration with direct velocity feedback(DVFB) control strategy is not clearly defined so far. It is well known that DVFB control can be very useful when a pair of sensor and actuator is collocated on structures with a high gain and excellent stability. It is considered that three different collocated Pairs of piezoelectric actuators (20, 50 and 100 mm long) and accelerometers installed on three identical clamped-clamped beams($30{\times}20{\times}1mm$). The response of each sensor-actuator pair requires strictly positive real(SPR) property to apply a high feedback gain. However the length of the piezoactuator affects the SPR property of the sensor-actuator response. Intensive simulation and experiment show the effect of the actuator length variation is strongly related with the frequency range of the SPR property. Thus an optimal length ratio was suggested to obtain relevant performance with a good stability under the DVFB strategy.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.379-387
• /
• 2007

In this paper, a nonlinear anti-sway controller for container cranes with load hoisting is investigated. The considered container crane involves a planar motion in conjunction with a hoisting motion. The control inputs are two (trolley and hoisting forces), whereas the variables to be controlled are three (trolley position, hoisting rope length, and sway angle). A novel feedback linearization control law provides a simultaneous trolley-position regulation, sway suppression, and load hoisting control. The performance of the closed loop system is shown to be satisfactory in the presence of disturbances at the payload and rope length variations. The advantage of the proposed control law lies in the full incorporation of the nonlinear dynamics by partial feedback linearization. The uniform asymptotic stability of the closed-loop system is assured irrespective of variations of the rope length. Simulation and experimental results are compared and discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1487-1498
• /
• 2016

In monitoring a process, in-control process parameters must be estimated from the Phase I data. When we design the control chart based on the estimated process parameters, the control limits are usually chosen to satisfy a specific in-control average run length (ARL). However, as the run length distribution is skewed when the process is either in-control or out-of-control, the median run length (MRL) can be used as alternative measure instead of the ARL. In this paper, we evaluate the performance of Shewhart $\bar{X}$ chart with estimated parameters in terms of the average of median run length (AMRL) and the standard deviation of MRL (SDMRL) metrics. In simualtion study, the grand sample mean is used as a process mean estimator, and several competing process standard deviation estimators are used to evaluate the in-control performance for various amounts of Phase I data.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.135-141
• /
• 2008

In this paper a novel tracking system is described, regarding the influence of shadow between array, aimed at improving the efficiency of PV tracking system. Comparing with a building site versus capacity power, domestic solar powers have a limited siting. Therefore, each array interferes with the shadow of other arrays. The loss by influence of those shadow can be compensated for by means of control algorithm of the tracking device. The paper suggests a method controlling an altitude for length which is received the shadow influence of PV array. By using an azimuth of current solar position and the length between arrays, the controller of tracking device is able to calculate the length between actual arrays and make a comparison of the shadow length at a specific time with the length between arrays. When the shadow length is longer than the length between arrays, the controller of tracking device can adjust a position by compensating error altitude of the length between arrays at an altitude of current solar position. In the paper, we develop the control algorithm able to minimize the loss caused by the influence of shadow on the PV tracking system, and compared this with conventional output system. The controller has been tested in the laboratory with proposed algorithm and shows excellent performance

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.213-217
• /
• 1997

The semi-active recoil system provides automatic hydraulic pressure and recoil length by an exteral impulse compared with the conventional recoil system. We developed the proto type of recoil system and validated the performance through simulation and experiment. The main issue of the system is how to adjust pressure and length simultaneously. The system consists of external pressure control valve and flow control valve outside of cylinder. The pressure control valve control the cylinder pressure and recoil length. The controlled system enhances the control performance.

• Journal of Power System Engineering
• /
• v.20 no.2
• /
• pp.58-65
• /
• 2016

Lately, tugboats are widely used to maneuver vessels by pushing or towing them where tugboats use rope. In order to correctly control the motion of tugboat and towed vessel, the dynamics of the towline would be well identified. In real application environment, the towing rope length changes and the towing load is not constant due to the various sizes of towed vessel. And there are many ropes made by many types of materials. It means that it is not easy to obtain rope dynamics, such that it is too difficult to satisfy the given control purpose by designing control system. Thus real time identification or adaptive control system design method may be a solution. However it is necessary to secure sufficient information about rope dynamics to obtain desirable control performance. In this paper, the authors try to have several rope dynamic models by changing the rope length to consider real application conditions. Among them, a representative model is selected and the others are considered as uncertain models which are considered in control system design. The authors design a robust control to cope with strong uncertain and nonlinear property included in the real plant. The designed control system based on robust control framework is evaluated by simulation.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.17 no.1
• /
• pp.14-16
• /
• 2006

Background and Objectives: The purpose of this study is to investigate the change of vocal tract length according to the level of the pitch by the singers. Materials and Methods: Fifteen tenors were asked to produce successive /a/ sound in G4(382Hz) for the head register, C3(131Hz) for the chest register and usual speaking sound. The control group consisted of 15 males of an similar age who are not professional singers. The length of vocal tract was calculated by applying the formula of Fn=(2n-1) c/4L(F : formant frequency, c : the speed of sound in the vocal tract(350m/sec), L : length of vocal tract, $n=1,2,3,4,{\ldots}{\infty}$). Results: In singer's group, there showed no significant statistical difference of length among head and chest register and usual speaking sound. However in the control group, there showed statistically significant difference of length. Comparison of the absolute difference in the length of vocal tract by changing level of pitch in phonation, between the control group and the singers group. Changing from G4 phonation to C3 phonation and C3 phonation to usual speaking sound showed statistically difference of vocal tract length was less in the singers group than the control group. Conclusion: The change of vocal tract length, in either speaking or singing, was less in singers than the control group. We could assume that the singers maintain their larynx position constantly throughout the pitch range when phonation.

• The Journal of Pediatrics of Korean Medicine
• /
• v.16 no.1
• /
• pp.149-169
• /
• 2002

This study was designed to observe the efficacy of Boyangsengjang-Tang(BST) on the growth of rats. The effects on growth, and the secretion of hormones in the serum was measure. Male BALA/C mice(weight 20-25g), and male ICR rats(weigh 120-150g), were each divided into 3 groups : Sample A, Sample B and a Control group. Each group consisted of 4 mice and 5 rats. Mice received $5{\mu}{\ell}$ BST, and rats received $50{\mu}{\ell}$ BST, daily. Sample A was administered with normal BST for 3 weeks. Sample B was was administered with 10 times the normal amount of BST for 3 weeks. Control group was administered with normal saline for 3 weeks. The body weight, body length, subcutaneous fat, length of femur, serum GH, serum IGFBP-3 and serum in TSH were measured at 1, 2, and 3 weeks. The results were as follows ; 1. The body weigh of the rats increased significantly in Sample A after 3 weeks when compared with control group. 2. The body length in rats increased significantly in Sample A when compared with control group. 3. The amount of subcutaneous fat in the mice increased significantly in Sample B after 1 week when compared with control group. The amount of subcutaneous fat in rats increased significantly in Sample A and Sample B after 3 weeks when compared with the control group. 4. The length of the femur in rats increased significantly in Sample in A and Sample B in 1, 2, and 3 weeks when compared with the control group. 5. The level of GH, IGFBP-3 and TSH in the serum was not statically different when compared with the control group. According to the above results, BST (which reinforces the Kidney's Yang and strengthens muscle and bone) increases body weight, body length, subcutaneous fat and the length of the femur when compaired with the control group. BST therefore seems to improve growth.