• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.17-23
• /
• 1994

Carboxylic acid group gradient surface where the density of carboxylic acid groups changes gradually along the sample length was prepared. Carboxylic acid group gradient surface was produced by the treatment of low density polyethylene sheet using a corona with gradually increasing power, followed by the grad polymerization of acrylic acid. The prepared gradient surface was characterized by the measurement of water contact angle, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis.

• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.301-317
• /
• 2011

Statistical and probabilistic behaviors of fibers forming fiber webs of all kinds are of great significance in the determination of the uniformity and physical properties of the webs commonly found in many industrial products such as filters, membranes and non-woven fabrics. However, in studying the spatial geometry of the webs the observations must be theoretically as well as experimentally confined within a specified unit area. This paper provides a general theory and framework for computer simulation for quantifying the fiber segments bounded by the unit area in consideration of the "edge effects" resulting from the truncated length segments within the boundary. The probability density function and the first and second moments of the length segments found within the counting region were derived by properly defining the seeding region and counting region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1559-1565
• /
• 1997

A new multitrack RLL codes with immunity to intertrack interference (ITI) is proposed. This code takes aim at a high density storage channels by reducing the track width and/or guard bands between tracks since it prevents transition in neighboring tracks at the same time epoch. The capacities of the codes are found for each maximum and minimum constraint pair.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.162-166
• /
• 2014

This study was conducted to evaluate effects of planting densities ($60{\times}5cm$, $60{\times}10cm$, $60{\times}15cm$) and PE mulching (polyethylene film mulching, non- mulching) on growth and yield of foxtail millet in drained paddy field for 2 years. In PE plots, culm length, culm diameter and fresh weight were higher than control plot. Additionally, spike length, seed weight per hill and thousand seed weight were also higher in PE plot. The yield of foxtail millet were increased with 104% and 112% at PE plot. Culm diameter was highest at $60{\times}15cm$ plot with 8.90 and 8.06 mm, however, culm length was highest at $60{\times}5cm$ plot with 130, 142 cm in $1^{st}$ and $2^{nd}$, respectively. Plant height was higher by the increase of planting density. As plant density decreased, that spike length and seed weight per hill were increased. Yield of planting density were highest at $60{\times}10cm$ plot $298kg{\cdot}10a^{-1}$, $436kg{\cdot}10a^{-1}$ yearly, respectively that it were in order of $60{\times}10cm$ plot > $60{\times}5cm$ plot > $60{\times}15cm$ plot.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.4
• /
• pp.380-387
• /
• 2023

Stocking density is associated with Paralichthys olivaceus growth; thus, fish should be rapidly reared at high densities for commercial reasons. Studies have reported that high stocking density retards growth; however, few have investigated the malformations caused by stocking density stress. This study compared the growth and malformation rates of P. olivaceus at different densities and stress- and immune-related gene expression between malformed and normal fish. Forty days post-hatching, fish (total length, 1.49±0.02 cm) were reared at 800 (low density; LD), 1500 (medium density; MD), and 4000 (high density; HD) fish/m², and the growth rate was measured weekly. On day 30, RNA was extracted from the kidneys, and the expression of stress-, immune-, and malformation-related genes was analyzed using qRT-PCR. The malformation rate in the HD groups was approximately three times higher (62%) than that in the LD and MD groups (approximately 20%), and growth was lower regarding length and weight. The stress-related (HSP70 and GPX) and immune-related (PIR and IgM) genes showed higher mRNA expression in the HD group and malformed fish than in the LD group and normal fish. However, TLR3 showed the opposite results. In summary, high stocking density suppressed growth and increased malformation risk in P. olivaceus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.56-56
• /
• 2010

Using first-principles density-functional theory calculations, we find dramatically different electronic states in the C chains generated on the H-terminated C(111) surface, depending on their length and parity. The infinitely long chain has $\pi$ electrons completely delocalized over the chain, yielding an equal C-C bond length. As the chain length becomes finite, such delocalized $\pi$ electrons are transformed into localized ones. As a result, even-numbered chains exhibit a strong charge-lattice coupling, leading to a bond-alternated structure, while odd-numbered chains show a ferrimagnetic spin ordering with a solitonlike structure. These geometric and electronic features of infinitely and finitely long chains are analogous to those of the closed (benzene) and open (polyacetylene) chains of hydrocarbons, respectively.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.137-141
• /
• 2005

A transverse flux, PM-exited linear motor (TFM-LM) with inner mover was designed and built. Its output power density is higher and its weight is lower than those of the conventional PM exited linear synchronous motors (PM LSM). To obtain the maximum thrust force under the given volume, the thrust force density with respect to the ratio of the slot width and the length of pole pitch is analyzed by the 3-dimension finite element method (FEM). Finally, calculated static thrust forces was compared with the experimental values. The calculated and measured performance of the transverse flux, PM-exited linear motor with inner mover revealed great potential for system improvements by reducing the mass of the linear motor. For examples, when this motor was applied to a ropeless elevator, it was possible to increase the power density by more than 400% over the conventional PM-LSM. The results of this study recommend this type of motor for the ropeless elevator or gearless direct linear driving system.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.2
• /
• pp.69-76
• /
• 1984

In order to obtain high proportion of Y sperm the semen was laid over 6%,10% and 20% bovine serum albumin. Separated sperm were stained with quinacrine mustard in order to see F - body which could be seen in human Y sperm. But we could'nt find F-body in the bull sperm. So sperm were compared with size of sperm head. As a result of observation separated sperm was small in size of length and width of sperm head as compared with control sperm. So it was found that the proportion of Y sperm showed a marked increase in separated layer. Then the higher albumin density was, the higher the proportion of Y sperm which had smaller head and faster motility was. But the higher albumin density was, the lower the recovery rate of sperm was. So it was hard to separate Y sperm in oligospermia.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.213-216
• /
• 2006

The effect of cashmere yarn twist, knitted fabric density, and cashmere properties on pilling rates of cashmere knitted fabric is investigated in this paper. The experimental results show that yarn twist and fabric density have little influence on pilling rates of cashmere knitted fabric for yarn 38.4 tex/2 when yarn twist varies from 234 T/m to 272 T/m, and the fabric density is 9.7, 10.7, and 11.2 yarns/inch, respectively. The length of cashmere fiber, in particular less than 7.5 mm, is responsible for the pilling rates of cashmere knitted fabric based on optimal scaling regression analysis.