• Journal of Korean Neurosurgical Society
• /
• v.47 no.6
• /
• pp.424-427
• /
• 2010

Objective : Chronic subdural hematomas (CSDH) are more common on the left hemisphere than on the right. We verified this left predilection of CSDH and tried to explain the reason for this discrepancy. Methods : We investigated the laterality of CSDH in 182 patients who were treated from January 2005 to December 2009. We examined the symmetry of the cranium and the location of the lesion. Results : CSDH was more common on the left-side. The cranium was symmetric in 63 patients, asymmetric in 119 patients. The asymmetric crania were flat on the right-side in 77 patients, on the left-side in 42 patients. The density of the CSDHs was hypodense in 29 patients, isodense 132 patients, and the others in 21 patients. Bilateral hematomas were more common in the hypodense group. In the right flat crania, the hematoma was more commonly located on the opposite side of the flat side. While in the left flat crania, the hematoma was more common on the same side. Conclusion : CSDHs occurred more frequently on the left side. The anatomical asymmetry of the cranium influences the left predilection of CSDH.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.515-521
• /
• 2015

The SymMerge algorithm is an efficient merging algorithm for input sequences u and v of sizes $\left|u \right|=m$ and $\left|v \right|=n$, $m{\leq}n$. We consider complexity analysis for SymMerge algorithm regarding to the required number of comparisons. The focus of the previous complexity analysis was on finding the values of upper bounds, i.e. showing the asymptotical optimality. In this paper, in a different way from the previous complexity analysis, we show that the overall required number of comparisons for two representative special cases "symmetric case" and "maximum spanning case" can be calculated exactly i.e. the least upper bounds regarding to the required number of comparisons are calculated. Symmerge requires exactly $m\;log\frac{n}{m}+4m-logm-3$ comparisons for symmetric case of sizes $m=2^k,\;n=2^l,l{\geq}k$ of input sequences and exactly $\frac{1}{2}m^2+(m+1)logm-\frac{3}{2}m+2$ comparisons for maximum spanning case of sizes $m=2^k,n=2^m-m$ of input sequences. Additionally we show that the complexity of the Symmerge algorithm regarding to the overall required number of comparisons for these special cases can be defined by recurrence relations.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.279-286
• /
• 2010

The purpose of this study was to compare the electromyographic(EMG) activities of trunk and hip muscles between right and left sides while subjects performed prolonged manual task in asymmetric and symmetric weight-bearing posture. Fifteen healthy male college students were recruited for this study. The subjects were asked to perform bimanual upper extremity task for 6 minutes in two different standing postures. In the symmetric weight-bearing posture, the subjects were standing with evenly distributed body weights to both legs. In the asymmetric weight-bearing posture, the subjects distributed about 90% of their body weight onto their preferred(supporting) leg and 10% of their body weight onto the opposite leg while they were standing. EMG activities of the right and left internal oblique, erector spinae, gluteus maximus, and gluteus medius were measured and normalized as % MVIC. Then the EMG data were statistically analyzed using paired t-tests. The EMG activities of all measured muscles were not significantly different between the right and left side in the symmetrical weight-bearing posture(p>0.05). However, the EMG of the supporting side internal oblique was significantly lower than the opposite side(p<0.05), and the EMG of the erector spinae, gluteus maximus, and gluteus medius were significantly greater on the supporting side(p<0.05). The results of this study support that unbalanced use of right and left muscle possibly causes the changes in muscle length which results in asymmetry of trunk and hip muscles. Furthermore, the uneven weight support onto right and left legs will cause a distortion of viscoelastic ligaments around hip and sacroiliac joints in the long run. Further studies to determine the effect of various manual tasks on the trunk and hip muscles as well as the effect of asymmetrical weight-bearing standing posture on hip and back muscle fatigue may be required.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.380-387
• /
• 2006

Objective: The purpose of this study was to compare the right and left differences of frontal ramal inclination in chin-deviated individuals. Methods: Thirty adult patients with clinically apparent chin deviation were selected as the chin-deviated group, and 30 adult patients with symmetric faces were selected as the control group. On the posteroanterior cephalograms, the frontal ramal inclination was measured, and the right and left differences were compared and analyzed. Results: While the control group did not show right and left differences of frontal ramal inclinations, the chin-deviated individuals showed right and left differences of frontal ramal inclination. In chin-deviated individuals, the frontal ramal inclinations of the non-deviated side were statistically greater than those of the deviated side. The right and left differences of frontal ramal inclinations, with menton deviation and the right and left differences of maxillary heights showed statistically significant correlation. Conclusion: We conclude that the frontal ramal inclinations should be considered in the diagnosis of facial asymmetry.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.146-152
• /
• 2006

Most upland in Korea have irregular field shapes. Boom sprayers working alone winding row will show considerable differences of spraying amount per unit area between left and right booms. If flow rates of both booms are equal. This phenomenon becomes significant as steering radius of sprayer decreases. This study was performed to seek a method which reduce the difference of the spray amount between left, right and center booms while spraying along curvy rows. A flow rate control method for keeping application rate of each boom section constant was proposed and experimentally proved using a boom sprayer attached to a cultivating tractor. The flow rate control device was composed of 3 ball valves and a rotary angle sensor. The rotary angle sensor showed a symmetric voltage output with respect to steering radius. The spray overlapping was happened in a boom nearby the steering center when steering radius of the sprayer was less than 5.2 m. Flow rates for left, right and center booms were regulated using ball valves based on the steering radius and spraying areas ration of right/left boom. The Maximum spraying area ratio ($S_{LR}$) of left to right boom section was 1:3.6 at the steering radius of 5.2 m. However, The Maximum achieved right and left spraying flow ratio was 1:2.7.

• Kyungpook Mathematical Journal
• /
• v.61 no.1
• /
• pp.11-21
• /
• 2021

We study the structure of rings whose factor rings modulo nonzero proper ideals are right duo; such rings are called right FD. We first see that this new ring property is not left-right symmetric. We prove for a non-prime right FD ring R that R is a subdirect product of subdirectly irreducible right FD rings; and that R/N∗(R) is a subdirect product of right duo domains, and R/J(R) is a subdirect product of division rings, where N∗(R) (J(R)) is the prime (Jacobson) radical of R. We study the relation among right FD rings, division rings, commutative rings, right duo rings and simple rings, in relation to matrix rings, polynomial rings and direct products. We prove that if a ring R is right FD and 0 ≠ e2 = e ∈ R then eRe is also right FD, examining that the class of right FD rings is not closed under subrings.

• Journal of the Korean Society of Costume
• /
• v.13
• /
• pp.51-72
• /
• 1989

In this thesis, I examined the mental, philosophical aspects and the aesthetic sense of our ancestors through the study of the patterns pictured in the mural paintings of Koguryo dynasty's old tomb. To view the mode of construction in Koguryo dynasty from present angle, the detailed analysis of the patterns was done. As a result, I could fully understand the formative consciousness of our nation. 1. I defined the process of transition of the mural paintings by putting some 70 mural aintings into the form of a diagram. 2. The cultural aspects of the mural paintings in Koguryo dynasty were characterized by the fusion of our primitive religion and Buddhism, Confucianism and Taoism which were introduced from China. From this fact, I could inferred that Koguryo people were giving off the strong desire for the faith by means of the mural paintings. Further more I found that configuration of the patterns such as religious elements. 3. The types of the patterns were classified into four types, this is, geometric type, natural type, cultural type and abstract type, Among these types, geometric type and natural type were nonsymbolic in nature but became cultured and abstracted in course of time. cultural pattern and abstract pattern got the symbolic meaning in the long run. Of all the constitution of the patterns represented in the mural paintings such as repeat constitution, left and right symmetric constitution, top and bottom symmetric constitution and rotary symmetric constitution, the left and right symmetric constitution was mainly used and some monotony of left and right symmetric constitution. The analysis of motif which was got from the mode of the patterns showed that the mixing of symbolic and nonsymbolic patterns made it possible to regard the separate symbol as compound in nonsymbolic patterns and the combination between nonsymbolic patterns ensured the understanding of other patterns in certain cases. Our ancestors made great efforts to transmit certain meaning symbolically. Also to heighten the symbolism, they drew the meangless patterns firstly and then appended meaning to those patterns secondly. Furthermore, they offered the background to the patterns comblined with symbolism, so that meaning transmission was clarified at last. As mentioned above, the patterns shown in the mural paintings of Koguryo dynasty's old tomb were characterized by natural beauty. And natural beauty was found out clearly in the form and constitution of the patterns. Therefore I concluded that our nation's religious, philosophical tradition was acted on the patterns strongly.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1758-1769
• /
• 1995

The heat transfer of oscillating flow in a cylinder with regenerator was investigated by the moving boundary technique. The flow in regenerator was modeled by means of Brinkman Forchheimer-Extended-Darcy equation . Results showed that when piston moved toward right, velocity vectors near cylinder wall at left piston and right side of regenerator inclined to symmetric axis and velocity vectors near cylinder wall at right piston and left side of regenerator inclined to cylinder wall. And the time averaged Nusselt number was increased by 46.73% when the oscillatory frequency became twice and decreased by 31.46% when the oscillatory frequency became half. The time averaged Nusselt number was increased by 18.09% when thickness of the regenerator became twice and decreased by 7.53% when thickness of the regenerator became half. But mesh size of regenerator hardly affected the Nusselt number. And efficiency of regenerator was larger as the oscillatory frequency was smaller, thickness and mesh size of regenerator was larger.

• Communications of the Korean Mathematical Society
• /
• v.11 no.4
• /
• pp.1123-1135
• /
• 1996

In this paper, we introduce some properties of Steinhaus graphs of order n, and prove that the size of some special type of induced cycles in Steinhaus graphs of order n is bounded by $\left\lfloor \frac{n+3}{2} \right\rfloor$.