• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.1
• /
• pp.45-49
• /
• 1981

The hot spot on liver scan was demonstrated by many authors in various conditions such as SVC obstruction, Budd-Chiari syndrome, liver abscess, hemangioma of liver, hepatic venoocclusive diseases, IVC obstruction, and tricuspid insufficiency. And the appearance of hot spot in SVC obstruction is due to unsual collateral circulation. But there was no report of this hots pot on liver scan in our country. We have recently observed one patient with SVC obstruction who shows well-defined area of increased radioactivity between right and left lobe of liver on liver scan using $^{99m}Tc-tin$ colloid, and demonstrated collateral circulations with RI venography using $^{99m}Tc-O_4$. The injection site of radiocolloid was left antecubital vein. This hot spot did not appear when the radiocolloid was injected into right leg vein. We report here this hot spot on liver scan in SVC obstruction with review of some liter atures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.34-41
• /
• 2009

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This task has substantially complicated several factors. For example, the size, geometry and features of the various vehicles which might enter the monitored zone is varied widely and therefore present various reflective characteristics. This study proposes the optimal specification and configuration of optical system and IR array sensor of blind spot detection system, and shows the results of the performance evaluation of developed system.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.22-34
• /
• 2003

Objective : To ascertain whether the concept of the treatment side is associated with changes in the blind spot mapping that represents the brain function. Methods : Among the outpatients who visited to Department of Acupuncture & Moxibustion, National Medical Center from March 2002 to October 2002, we selected 40 clinical trial volunteers that showed right side physiological blind spot more enlarged than left, and underwent the examinations of Department of Opthalmology, National Medical Center for ruling out the pathological conditions. Physiological blind spot maps were used as an integer of brain activity before and after electroacupuncture application on the unilateral ST36 meridian point by dividing 40 subjects into two comparative groups for double-blind controlled study. Results: The significant changes in the blind spots were observed. Electroacupuncture application on the ipsilateral or contralateral ST36 of an enlargement cortical map were associated with the concept of determining the treatment side. In the case of electroacupuncture application on the ipsilateral side of an enlarged blind spot, there were decrease of $4.11{\pm}8.56cm$(17.3%) in blind spot perimetry length(p < 0.05). In the case of contralateral side, there were increase of $3.19{\pm}5.40cm$(13.7%) in blind spot perimetry length(p<0.05). The Differences were statistically significant(p<0.05). Conclusions: We found that eletroacupuncture application was associated with an increase or decrease in the brain function in the view of blind spot changes depending on the treatment side. These results suggest that the traditional acupuncture therapeutic strategy with determining the treatment side has clinical significance in the view of the brain function.

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.66-70
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body is spot welding. And $CO_2$ arc welding is used in a small part. In production field, $CO_2$ arc welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ arc welding process frequently. But $CO_2$ arc welding process should be used at robot interference parts and closed parts where spot welding couldn't. $CO_2$ welding is divided into lap welding and plug arc spot welding. In case of plug arc spot welding, burn through and under fill were caused in various welding environment such as different thickness combinations of base metal, teaching point, over the two steps welding and inconsistent voltage/current. It makes some problem like poor quality of welding area and decrease the productivity. In this study, we will evaluate the effect of teaching point through the weld pool behavior and bead geometry in the arc spot welding at the plut hole. Welding position is horizontal position. And galvanized steel sheet of 2.0mm thickness that has plug hole of 6mm diameter was used. Teaching point was changed by center, top, bottom, left and right of the plug hole. At each condition, the phenomenon of weld pool behavior was confirmed using a high-speed camera. As the result, we find the center of plug hole is the most optimal teaching point. In the other teaching point, under fill was occurred at the plug hole. This phenomenon is caused by gravity and surface tension. For performance of arc spot welding at the plug hole, the teaching condition should be controlled at a center of plug hole.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.2
• /
• pp.9-16
• /
• 2008

GongJu is a historical city. There has been scattered Baekje, Chosun and modern cultural heritages in GongJu. Cultural heritages in Baekje is simply preserved in their current condition. Chosun and modern cultural heritages have left their traces only, so that faded from the memory of the world. We must not lose the historical interconnectedness that is created by these heritages. This study is to analyze the architectural culture contents and its practical use program in urban side, and search for the strategy. The purpose of this study is as follows: The first is to retrieve the scattered heritages according to the age and area(as a spot). The second is to improve the street landscape through the linear linkage connecting from spot to spot.(as a line) The last is to create the image of historical city through the regional development.(as an area)

• Advances in pediatric surgery
• /
• v.6 no.1
• /
• pp.68-69
• /
• 2000

A case of primary hyperparathyroidism due to parathyroid adenoma is presented. A 14 year-old male was admitted to the hospital comptaining of voiding difficulty. The intravenous pyelogram demonstrated a stone in the proximal one third of the left ureter and marked hydronephrosis of the left kidney. The Tc-99m sestamibi nuclear scan demonstrated a hot spot below the lower pole of the left lobe of the thyroid. Laboratory study demonstrated hypercalcemia (12.4 mg/dL) and elevated parathyroid hormone (143.67 pg/mL). A parathyroid gland located below the lower pole of the left lobe of the thyroid was excised. A parathyroid adenoma, consisting of mainly chief cells was found on pathologic examination. Postoperatively the patient had transient hypocalcemic symptoms, which resolved with administration of calcium preparation and vitamin D.

• Journal of Oriental Medical Thermology
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2002

Objectives : This study was performed to apply thermography as an method in diagnosis of hwabyung patients. We studied 11 Hwabyung patients who visited to chronic diseases center and circulatory oriental internal medicine of Kangnam oriental medicine hospital and 11 patients control group. Methods : Diagnosis of Hwabyung was based on the dignostic criteria of Hwabyung. The temperature was measured on Chonjung(CV17) Shimsu(B15), Kansu(B18), Kyonjong(G21) in each group. The ${\Delta}T$ was measured between Chonjung(CV17) and Chungjong(CV16), left and right Chungjong(CV16), Shimsu(B15), Kansu(B18), Kyonjong(G21) in each group. We compared the ${\Delta}T$ and DITI types between patients and control group. Results : The ${\Delta}T$ between left and right Chungjong(CV16), Shimsu(B15), Kansu(B18), Kyonjong(G21) were not statistically significant. But the ${\Delta}T$ between Chonjung(CV17) and Chungjong(CV16) was statistically significant(P<0.05) in each group. In control group, DITI type was straight 36%, diamond 27%, multiple small spot 18%, others 18%. In Hwabyung patients group, DITI type was inverse triangle 64%, multiple small spot 9.1%, round 9.1%. Conclusions : The ${\Delta}T$ between Chonjung(CV17) and Chungjong(CV16) and DITI type is considered useful diagnostic methods on Hwabyung patients.

• Imaging Science in Dentistry
• /
• v.36 no.3
• /
• pp.157-162
• /
• 2006

Familial gigantiform cementoma is a rare fibre-cemento-osseous disease of the jaws which appears to be transmitted as an autosomal dominant trait with variable expressivity of the phenotype. A 7-year-old girl visited DKUDH complaining of the painless facial deformity. Clinically, significant facio-lingual expansion was observed at the left maxilla, left mandibular body and symphysis portion. Malposition of lower anterior teeth was found. Panoramic radiograph and CT scan showed the extensive expansile mixed lesion at maxilla and mandible. Bone scan revealed hot spot at the maxilla and left side of mandible. Histologic examination revealed moderately dense fibrous connective tissue with scattered masses resembling cementum. The patient's mother had a history of the mandibular resection due to benign tumor. Her younger brother had buccal expansion of right mandible. We report our finding of a family that has exhibited clinical, radiographic and histologic findings consistent with the familial gigantiform cementoma.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.164-170
• /
• 2013

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This study proposes SILS system with PreScan and Matlab/Simulink to verify practical applicability of developed BSDS. PreScan yields realistic driving environments and road conditions and vehicle model dynamics and collision warning is controlled by Matlab/Simulink.