• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.942-947
• /
• 2001

This paper provides a stability analysis of the transverse vibration of a spinning disk under the torque fluctuation from a permanent magnetic motor. An analytical model has been formulated for a flexible annular disk with its spinning velocity varying harmonically with the same frequency as the cogging torque. A perturbation method based on multiple time scales is applied to perform the stability analysis. Based on expressions for the amplitude and frequency of the parametric excitation, stability boundaries are determined in terms of a nominal spindle velocity, the least common multiple of poles and slots, the magnitude of torque fluctuation and the modal characteristics of. the disk. The stability diagrams predicted by perturbation have been verified numerically using the Floquet theory, which is in good agreement. In conclusion, the fluctuation in spinning velocity is found to affect the stability of the transverse vibration of a rotating disks. The results of this work can be applied to high precision spindle systems such as computer storage systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.224-240
• /
• 1996

It is common sense for at least one or more levels of cache memory to be used in these day's computer systems. In this paper, the impact of the internal cache memory organization on the performance of the computer is investigated by using a simulator program, which is wirtten by authors and run on SUN SPARC workstation, with several real execution, with several real execution trace files. 280 cache organizations have been simulated using n-way set associative mapping and LRU(Least Recently Used) replacement algorithm with write allocation policy. As a result, 16-way setassociative cache is the best configuration, and when we select 256KB cache memory and 64 byte line size, the bus traffic ratio was decreased compared to that of the noncache system so that a single bus could support almost 7 processors without any delay and degradationof high ratio(hit ratio was 99.21%). The smaller the line size we choose, the little lower hit ratio we can get, but the more processors can be supported by a single bus(maximum 18 processors). Therefore, using a proper cache memory organization can make a single bus structure be able to support multiple processors without any performance degradation.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.3
• /
• pp.154-160
• /
• 2019

Objectives: Stillbirth is a common adverse pregnancy outcome that represents a distressing and traumatic event for women and their partners. The aim of this study was to identify factors associated with stillbirth in ever-pregnant women in Nepal. Methods: This study utilized the individual women's dataset from the Nepal Demographic and Health Survey, conducted in 2016. The dependent variable of interest was whether women had at least 1 stillbirth during their lifetime. The associations between independent variables and the dependent variable of the study were analyzed using a multiple logistic regression model. Results: Among 8918 ever-pregnant women aged 15-49 years, 488 had experienced at least 1 stillbirth during their lifetime, representing 5.5% of the total. After adjusting each factor for the confounding effects of other factors, maternal age, maternal education, place of residence, and sub-region remained significantly associated with having experienced stillbirth. Conclusions: Stillbirth continues to be a major problem among women, especially those with higher maternal age, those who are illiterate, and residents of certain geographical regions. To minimize stillbirth in Nepal, plans and policies should be focused on women with low education levels and residents of rural areas, especially in the western mountain and far-western hill regions.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.15 no.1
• /
• pp.49-54
• /
• 2015

Multiple epiphyseal dysplasia (MED) is one of the more common skeletal dysplasias. MED is characterized by joint pain and stiffness, a waddling gait, and/or mild short stature in childhood. Radiographic findings include delayed and irregular ossification of the epiphyses in multiple joints. Mutations in at least six different genes (COMP, MATN3, COL9A1, COL9A2, COL9A3, and DTDST) can cause MED, and it can be either dominant or recessive inheritance. Molecular diagnosis is important for accurate prognosis and genetic counselling. COMP mutation is the most common form of MED in Western. But, MATN3 mutation was reported as the most common type of MED in Korea. Here, we describe a boy who was diagnosed as MED by clinical and radiological features. Hip radiograph of the patient was suggested MATN3 mutation. But knee radiograph was suggested COMP mutation. MATN3 and COMP mutations direct sequencing, but were no mutation. So we tested whole exome sequencing, but significant variant was not detected as known MED six genes mutations. The patient was diagnosed as having MED clinically and radiologically. Further study to identify the other responsible genes for MED is needed.

• Wind and Structures
• /
• v.22 no.3
• /
• pp.273-290
• /
• 2016

The flutter derivatives of bridge decks can be efficiently identified using the experimentally and/or numerically coupled forced vibration method. This paper addresses the issue of inherent requirement for adopting different frequencies of three modes in this method. The aerostatic force components and the inertia of force and moment are mathematically proved to exert no influence on identification results if the signal length (t) is integer (n=1,2,3...) times of the least common multiple (T) of three modal periods. It is one important contribution to flutter derivatives identification theory and engineering practice in this study. Therefore, it is unnecessary to worry about the determination accuracy of aerostatic force and inertia of force and moment. The influences of signal length, amplitude, and frequency ratio on flutter derivative are thoroughly investigated using a bridge example. If the signal length t is too short, the extraction results may be completely wrong, and particular attention should be paid to this issue. The signal length t=nT ($n{\geq}5$) is strongly recommended for improving parameter identification accuracy. The proposed viewpoints and conclusions are of great significance for better understanding the essences of flutter derivative identification through coupled forced vibration method.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.72-75
• /
• 2004

In this paper, the task assignment strategy considering communication delay and the priority of distributed tasks is proposed for the real-time network system in order to maximize the utilization of the system. For the task assignment strategy, the relationship among priority of tasks in network nodes, the calculation time of each task, and the end-to-end response time including the network delay is formulated firstly. Then, the task assignment strategy using the genetic algorithm is proposed to optimize the utilization of the system considering the LCM(Least Common Multiple) period. The effectiveness of proposed strategy is proven by the simulation for estimating the performance such as the utilization and the response time of the system in case of changing the number of tasks and the number of network nodes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.1-6
• /
• 1993

This report proposes a novel method of identification of continuous time-delay systems from sampled input-output data. By the aid of a digital pre-filter, an approximated discrete-time estimation model is first derived, in which the system parameters remain in their original form and the time delay need not be an integral multiple of th sampling period. Then an identification method combining the common linear least squares(LS) method or the instrumental variable(IV) method with the genetic algorithm(GA) is proposed. That is, the time-delay is selected by the GA, and the system parameters are estimated by the LS or IV method. Furthermore, the proposed method is extended to the case of multi-input multi-output systems where the time-delays in the individual input channels may differ each other. Simulation resutls show that our method yields consistent estimates even in the presence of high measurement noises.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.1
• /
• pp.13-20
• /
• 2009

The IPSAP which is a finite element analysis program has been developed for high parallel performance computing. This program consists of various analysis modules - stress, vibration and thermal analysis module, etc. The M orthogonal block Lanczos algorithm with shiftinvert transformation is used for solving eigenvalue problems in the vibration module. And the multifrontal algorithm which is one of the most efficient direct linear equation solvers is applied to factorization and triangular system solving phases in this block Lanczos iteration routine. In this study, the performance enhancement procedures of the IPSAP are composed of the following stages: 1) communication volume minimization of the factorization phase by modifying parallel matrix subroutines. 2) idling time minimization in triangular system solving phase by partial inverse of the frontal matrix and the LCM (least common multiple) concept.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1505-1510
• /
• 2001

A method for mapping quantitative trait loci (QTL) was introduced incorporating the information of mixed progeny from complex pedigrees. The method consisted of two steps based on single marker analysis. The first step was to examine the marker-trait association with a mixed model considering common environmental effect and reversed QTL-marker linkage phase. The second step was to estimate QTL effects by a weighted least square analysis. A simulation study indicated that the method incorporating mixed progeny from multiple generations improved the accuracy of QTL detection. The influence of within-genotype variance and recombination rate on QTL analysis was further examined. Detecting a QTL with a large within-genotype variance was more difficult than with a small within-genotype variance. Most of the significant marker-QTL association was detectable when the recombination rate was less than 15%.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2079-2081
• /
• 2002

R/C helicopter has been used to several fields of military affairs, investigation searching and toys because it has small size hovering and vortical take-off characteristics etc. Therefore it needs more realizable control method. The paper introduces simulation and experimental results for control of a helicopter training simulator by self tuning control method. To realize the disturbance rejection and the given reference tracking, a least common multiple polynomial between the reference and disturbance model polynomials is operated to the plant model. The effectiveness of the method is shown by simulation and experimental results for a helicopter training simulator with two degree of freedom.