• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2000년도 정기총회 및 특별심포지움
• /
• pp.19-40
• /
• 2000

본 연구에서는 해수에 의한 누수지점 파악을 위하여 방조제 4개소에 대해 단극배열 전기비저항탐사, SP탐사 및 SP 모니터링을 실시하였고, 해석 자료들을 조석변화와 비교한 결과 본 방법들이 방조제 누수지점 파악에 효과적임을 확인하였다. 저수지의 경우는 그라우팅 보강공사가 계획된 1개소에 대하여 그라우팅 보강 전후에 각 각 쌍극자배열 전기비저항 탐사와 SP탐사를 실시하여 누수구간에 대한 탐사기법 적용성 검토 및 그라우팅 효과를 비교한 결과 저수지의 경우에도 SP탐사의 적용성이 높음을 알 수 있었다. 방조제의 경우는 해수의 영향으로 안정된 전기비저항 값을 얻기 어려워, 단극배열을 이용하여 측정전위값을 크게 만들어 높은 SiN비를 확보한 결과 지하의 정보가 단순화되는 단점에도 불구하고 적용성이 높음을 확인하였고, 방조제 제체를 통한 누수에 의해 발생되는 유동전위를 대상으로 SP 모니터링을 실시한 결과와 조석변화를 비교한 결과, SP값의 변화가 조위 변화와 일치되어 나타나므로 SP탐사가 누수지점의 탐지뿐만 아니라 누수 추세를 밝히는데 효과적인 탐사법으로 판단된다.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.95-101
• /
• 2016

Purpose: Recently, high-rise buildings are popular in korea due to high rate of land usage and cost performance in urban area. However, high-rise building causes several problems such as safety issues, cooling/heating load, stack effect, disaster prevention etc. The stack effect is one of the representative problems. Even though there are many researches on stack effect, there are few studies on design guideline considering local condition. Method: This study focuses on the change of pressure distribution according to the design factors which affects the airflow in high-rise residential buildings by simulation analysis. In this study, city, building floor, stairwell door leakage area, elevator door leakage area and changes of layout were considered ad the design factor. Result: The simulation results indicate that building height and ambient air temperature are significant design factor for stack effect.

• 융합보안논문지
• /
• 제10권4호
• /
• pp.1-11
• /
• 2010

최근 인터넷을 통해 개인정보 유출사례가 빈번히 발생하고 있으며, 한번 유출된 개인정보는 회수 변경이 어렵고, 명의도용 사기 등 제3의 범죄로 까지 이어지고 있어 국가차원의 대책 마련이 요구된다. 현재 각 포털사(社) 쇼핑몰 등 인터넷 사업자는 회원 가입시 개인정보를 무분별하게 수집하고 있으며 제대로 된 보안관리가 이루어지지 않고 있는 실정이다. 이러한 상황은 시간이 지날수록 해커가 공격할 수 있는 취약 요인의 수만 증가 시킬 뿐이며 보안 관리 범위도 통제할 수 없게 된다. 또한 국내 외 해커들은 금전적 이득을 얻기 위해 개인정보를 선호하고 있어 향후에도 개인정보 유출 사고는 지속 증가할 것으로 예상된다. 이에 본 논문에서 인터넷 회원가입을 위해 수집하는 개인정보 보안 관리 실태를 살펴보고 유출된 개인정보를 인터넷에서 재사용할 수 없도록 하는 공인인증서 기반 개인 인증체계 개선 모델을 제안하기로 한다.

• 한국농공학회지
• /
• 제12권2호
• /
• pp.1965-1970
• /
• 1970

The experiment was carried out in order to improve the leakage stopping work in the irrigation canal founding on the porous soil. But the experiment had many problems to be studied more owing to the insufficient time and facilities. The results obtained are summarized as follows; 1. Polyethylene film is estimated not to make strength decrease owing to buring in the subsoil, but to make owing to the sunlight. 2. Coated nylon shows the tendency to deteriorate strength when it is buried in the earth or exposed to the sun for long time, but leakage is all but impermeability generally. 3. Leakage loss rates for one hour show some differences in the canal to be full with water in accordance with operating methods, that is, the clay lining section is 12.6%, the coated nylon lining section is 1.7%, the polyethylene film lining section is 1.3%, respectively. 4. Leakage quantities per wetted perimeter unit area show $3.556cc/cm^2/hr$. in the clay lining section, $1.574cc/cm^2/hr$. in the coated nylon section, $0.695cc/cm^2/hr$. in the polyethylene film lining section, respectively. 5. When the construction fund make the clay lining section as a standard, the polyethylene film section is 92.1%, the coated nylon section is 174.2%, respectively. But, the unit cost of execution may be low when the polyethylene film and the coated nylon will enable to mass-produce for the purpose of execution.

• International journal of advanced smart convergence
• /
• 제8권2호
• /
• pp.77-87
• /
• 2019

One of important concerns in information security is to control information flow. It is whether to protect confidential information from being leaked, or to protect trusted information from being tainted. In this paper, we present Piosk (Physical blockage of Information flow Kiosk) that addresses both the problems practically. Piosk can forestall and prevent the leakage of information, and defend inner tangible assets against a variety of malwares as well. When a visitor who carries a re-writable portable storage device, must insert the device into Piosk installed next to the security gate. Then, Piosk scans the device at the very moment, and detects & repairs malicious codes that might be exist. After that, Piosk writes the contents (including sanitized ones) on a new read-only portable device such as a compact disk. By doing so, the leakage of internal information through both insiders and outsiders can be prevented physically. We have designed and prototyped Piosk. The experimental verification of the Piosk prototype implementation reveals that, Piosk can accurately detect every malware at the same detection level as Virus Total and effectively prevent the leakage of internal information. In addition, we compare Piosk with the state-of-the-art methods and describe the special advantages of Piosk over existing methods.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.15-22
• /
• 1998

Recently, the importance of variable displacement piston pump is increasing in industrial world. Especially, most consumers require various range of pressures and flow rates. Pressure compensator is a system controlling flow rate in piston pump at low cost and, therefore, satisfies the need of consumers. However, the system has serious problems, such as response and leakage. The response and leakage are affected by clearance between actuator piston and cylinder, roughness of surface, and spool overlap. In this paper, these effects are investigated experimentally, and optimal clearance and chamfer is obtained. While diameter of cylinder is fixed and diameter of actuator piston is changed in this experiment, response and leakage are measured. Also parameters such as roughness and processing accuracy are changed for piston of fixed clearance. Experimental setup modelled into several parts of actuator piston, cylinder, spool, and swash plate. Input pressure is changed by function generator and proportional valve. The result of this experiment shows that leakage increases very much in proportion to the increase of clearance, and especially leakage occurs enormously when clearance is more than 0.002. The response is not good because as clearance increases leakage increases and as clearance decreases viscous damping effect increases. Accordingly, it is found out that optimal clearance range exists for tile response, within about 0.0012∼0.0014, at this time. Futhermore, the better roughness and geometrical accuracy of actuator piston are, the smaller are leakage and friction. The paper informs that response and leakage are influenced by and geometrical accuracy of actuator piston, roughness of surface, and the clearance between actuator piston and cylinder, and that optimal design of actuator piston in the pressure compensator is possible.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.34-40
• /
• 2011

This paper is purposed to develop an leakage current detecting system(LCDS) which can prevent electrical fires on breaker capacity expansion as well as ruptures of XL(Extra long) pipelines and power failure by operation of ELB(Earth leakage breaker) at auto water machine in winter. In order to develop LCDS, this paper studied field state investigation, field state experiment, development of leakage alarm system and verification experiments. Field states investigation at livestock companies(10 companies) in cheong-won location to deduce the problems of auto water machine is analyzed. The field state experiment is conducted at B livestock company in cheong won location. The field state experiment method is measured with leakage current when ELB tripped by environment factor(fine, cloudy, and rainy day). The LCDS is developed as MCU(Micro Control Unit) part applied leakage current values at B livestock company. Verification experiments for the leakage current detecting system were conducted by two methods of current supply and field test. Results show that LCDS suggested in this paper are valuable and usable in auto water machine based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in livestock.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.23-27
• /
• 2002

Waterproofing is one of the important factor to improve performance of building elements. But existing repair system for waterproofing have many problems like a damage of waterproof layer due to movement of concrete substrate, blistering effect and moisture condition. So waterproofing layer can not play an important part to improve waterproofing function and performance of building. Therefore, new waterproofing system to solve these problems of existing waterproofing system is developed. In this paper, new waterproofing system in water-leakage repair for remodeling is introduced

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.46-51
• /
• 2007

Environmental contamination creates shortages of potable water. In such situations, the leakage of water due to breakage or aging of rubber valve seats is a serious problem. Rubber is apt to break when it is placed between two materials that contact each other. One way to avoid water leakage due to rubber damage and breakdown is to replace the rubber with metal, which is currently taking place in water distribution systems. In tribology, a severe form of wear is characterized by local macroscopic material transfer or removal, or by problems with sliding protrusions when two solid surfaces experience relative sliding under load. One of the major problems when metal slides is the occurrence of galling. Experimentally, various conditions influence incipient galling, such as hardness, surface roughness, temperature, load, velocity, and the external environment. This study sought to verify the galling tendencies of metal according to its hardness, surface roughness, load, and sliding velocity, and determine the quantitative effect of each factor on the galling tendencies.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.81-88
• /
• 2018

In this paper, we present some problems with the Groupware Messenger functionality based on dot net 2.0 and implement a new design structure to solve them. They include memory leakage, slow processing, and client window memory crash. These problems resulted in the inconvenience of using instant messaging and the inefficient handling of office tasks. Therefore, in this paper, instant messaging functionality is implemented according to a new design architecture. The new system upgrades dot net 4.5 for clients and deploys the new features based on MQTT for the messenger server. We verify that the memory leak problem and client window memory crash issues have been eliminated on the system with the new messenger functionality. We measure the amount of time it takes to bind data to a set of messages and evaluate the performance, compared to a given system. Through this comparative evaluation, we can see that the new system is more reliable and performing.