• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.446-454
• /
• 2022

This study proposes a carrier-based pulse width modulation (PWM) method for leakage current reduction and neutral point (NP) current control in a three-phase three-level converter, which is a carrier-based PWM version of the previously proposed low-frequency common mode voltage PWM. Three groups of space vectors with the same common mode voltage are used. When the averaged NP current needs to be positive or negative, the specific groups are employed to produce low-frequency common mode voltages. The validity of the proposed PWM method is verified through experiments.

• 설비공학논문집
• /
• 제13권2호
• /
• pp.134-143
• /
• 2001

This paper presents the characteristics of flank and tip seal leakage in a scroll compressor for air-conditioners with R-22 under actual operating conditions. It is well known that the leakage has significant effect on the performance of the scroll compressor. Experiments were performed by using indirect method for measuring mass flow rate passing through flank and tip seal under actual operating conditions, In addition, an analytical model for tip seal leakage was developed to investigate tangential and radial leakage observed at grooves and contact points of tip seals. For low oil concentration, theoretical results were compared with experimental data to verify the analytical model. As a result, leakages through flank and tip seal parts were evaluated as afunction of pressure ratio, orbiting angle, discharge pressure, tip clearance, and leakage point. It was also found that the tip seal leakage was considerable even though the tip seal provided adequate sealing effect.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.242-250
• /
• 2008

Lining systems are used for two purpose in landfills : as covers to minimize leachate generation and surface water contamination by providing a barrier from precipitation and other percolating waters, and as containment liners to contain leachate and minimize its downward migration into underlying groundwater. So identifying leaks in landfill liners is an essential part of waste management. There are many leakage detection systems to monitor and seek leakage location, such as two electrode method, electrode grid method, diffusion hoses, capacitance sensors and tracers sensing cables. However, most of them can be applied in the new landfill construction sites because sensors must be installed prior to work. This paper presents a new type of leakage detection system, so called fence type electrode arrangement system, to monitor leakage and to seek leakage location in working landfill as well as new landfill. This system is based on the measurement of an electrical current flowing through leakage point. Series of laboratory tests are performed to investigate an availability of this system and this paper present some of these results.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.22-29
• /
• 1989

The important point of MPI is the analysis of leakage field in the defective regions. The analysis of leakage field depends on many factors such like geometry and character of defect. In general the calculation of magnetic leakage fields arising from such defects presents an extremely complicated mathematical problem and is practically insoluable, since the inhomogeneities have complex geometrical shapes and may differ in physical nature. Therefore, this paper describes Hall probe measurements of residual leakage field around artificial flaws in alloy steel bar, and shows how the results to recent developments in 2D dipole and analytic models of the magnetic field defect interaction.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.346-347
• /
• 2020

This paper presents the two combination methods for leakage current reduction in photovoltaic system PCS. The leakage current in the photovoltaic system generated from the parasitic capacitance existing between the photovoltaic system and ground relevance to common mode voltage caused by PWM switching. Firstly, Leakage current reduced by a PWM method using two carriers with 180-degree phase different. Secondly, the leakage current is more reduced by connecting LCL filter to the mid-point of DC link. This combining method is revealed in PSIM simulation with 1 uF parasitic capacitance.

• 지구물리와물리탐사
• /
• 제19권4호
• /
• pp.200-211
• /
• 2016

횡단 전위 배열(cross potential array)과 동일열 전위배열(direct potential array) 자료를 뒷받침하여 다양한 수변 구조물의 누수 경로 예측을 가능하게 하는 배열을 제시하고 이를 D-Lux array 라고 명명하였다. 또한 D-Lux array 자료를 색으로 가시화한 하나의 행렬로 정리하여 D-Lux view라고 제시하고 D-Lux view에서 관찰되는 저 전위차 이상대의 위치로 누수 구역의 위치를 해석하였다. D-Lux view의 보다 직관적인 해석을 위해서 D-Lux array 자료와 동일열 전위 배열 자료를 함께 사용하여 각 지점들 사이의 전위차 자료를 각 지점의 전위값으로 역산하고 이를 이용하여 등전위 분포도를 작성하였다. 등전위 분포도는 그래프나 D-Lux view에서 알 수 없었던 누수의 유입구, 유출구 뿐만 아니라 경로까지 예측 가능하게 하였다. 수조 실험과 수치 해석으로 예비 탐사를 실시한 후 현장 탐사로 콘크리트 보와 필 댐에 대한 적용이 이루어졌다. 그 결과, 콘크리트 보와 필 댐에 대해 누수 경로 탐지가 가능함을 확인하였다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.350-359
• /
• 2013

본 논문에서는 협력 빔형성(Coordinated Multi-Point Coordinated Beamforming : CoMP CB) 시나리오에서 인접한 사용자들 때문에 발생되는 간섭(Inter User Interference : IUI)을 제거하기 위해 사용된 Block Diagonal Geometric Mean Decomposition(BD-GMD)기반의 IUI 제거 알고리즘을 Successive Signal to Leakage plus Noise Ratio(SSLNR) 환경에서의 ZF(Zero-Forcing)에 적용하여 누출 전력을 제거한다. 또 IUI 제거 알고리즘을 사용했을 시 문제가 되는 원하는 신호 전력(Desired signal power)의 크기를 크게 보장할 수 없다는 점을 보완하기 위해 적절한 채널 열 순열(Channel ordering)을 수행하여 원하는 신호의 전력을 높인다. IUI 제거 알고리즘 사용과 적절한 채널 열 순열을 통해 기존의 SSLNR-Zero-Forcing Tomlinson Harashima precoding(ZF-THP) 기법보다 더 나은 비트오류확률(Bit Error Rate : BER)성능을 낼 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.51-54
• /
• 2009

변압기 누설전류 통합 감시 장치는 변압기 중성점 접지선에 흐르는 누설전류를 검출하여 실시간으로 모니터링이 가능한 장치로, 지정 값 이상의 누설전류가 검출되면 관리자에게 경보함으로써 전기적인 사고를 사전에 예방할 수 있다. 본 논문에서는 변압기 누설전류 통합 감시장치에 대해 설명하고 실제 변압기 누설전류 통합 감시장치가 설치된 수용가의 누설전류량 측정을 통해 안전성 여부를 판단하였다.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.142-147
• /
• 2018

Private electrical facilities are judged whether it is suitable for the insulation aging condition of their incoming underground cables using DC leakage current test method. In the case where the service point of utility is the secondary side of cut out switch installed in the electric pole, there is a problem that it is difficult to separate the lightning arresters(LA) because of their high position of the pole. Therefore, the field test voltage is applied at value lower than DC 30 kV, which are stated in the inspection guideline. However, this test could reduced the insulation performance of the LA by accelerating the electrical stress of the metal oxide varistor element in the pre-breakdown region. In this study, we analyzed the relationship between the DC test voltage and the leakage current using the non-destructive DC high voltage equipment with leakage current measurement function. The results show that the leakage current increases sharply above the specified test voltage. As a consequence, it could be contributed to improve insulation aging inspection method by selecting the possible test area on the VI characteristic curve of the pre-breakdown area of the LA.