• 제목/요약/키워드: leaf movement

검색결과 62건 처리시간 0.026초

치료조사면 및 블록 유형분석을 통한 적정 다엽 콜리메이터 규모에 관한 연구 (Analysis of Radiation Field and Block Pattern for Optimal Size in Multileaf Collimator)

  • 안승도;양광모;이병용;최은경;장혜숙
    • Radiation Oncology Journal
    • /
    • 제12권2호
    • /
    • pp.253-262
    • /
    • 1994
  • The patterns of the conventional radiation treatment fields and their shielding blocks are analysed to determine the optimal dimension of the MultiLeaf Collimator (MLC) which is considered as an essential tool for conformal therapy. Total 1109 radiation fields from 303 patients (203 from Asan Medical center, 50 from Baek Hosp and 50 from Hanyang Univ. Hosp.) were analysed for this study. Weighted case selection treatment site (from The Korean Society of Therapeutic Radiology 1993). Ninety one percent of total fields have shielding blocks. Y axis is defined as leaf movement direction and it is assumed that MLC is installed on the cranial-caudal direction. The length of X axis were distributed from 4cm to 40cm (less than 21cm for $95\%$ of cases), and Y axis from 5cm to 38cm (less than 22cm for $95\%$ of cases). The shielding blocks extended to less than 6cm from center of the field for $95\%$ of the cases. Start length for ninety five percent of block is less than 10cm for X axis and 11cm for Y axis. Seventy six percent of shielding blocks could be placed by either X or Y axis direction, $7.9\%$ only by Y axis, $5.1\%$ only by X axis and It is reasonable to install MLC for Y direction. Ninety five percent of patients can be treated with coplanar rotation therapy without changing the collimator angle. Eleven percent of cases of cases were impossible to replace with MLC. Futher study of shielding technique is needed for $11\%$ impossible cases. The treatment field dimension of MLC should be larger than $21cm{\times}22cm$. The MLC should be designed as a pair of 21 leaves with 1cm wide for an acceptable resolution and 17cm long to enable the leaf to overtravel at least 6cm from the treatment field center.

  • PDF

한국산 거머리말(Zostera marina L.)의 해류에 대한 형태적 적응 (Morphological Adaptation of Zostera marina L. to Ocean Currents in Korea)

  • 임동옥;윤장택;한경식
    • 한국환경생태학회지
    • /
    • 제23권5호
    • /
    • pp.431-438
    • /
    • 2009
  • 한국산 거머리말(Zostera marina L.)의 해류에 대한 형태적 적응 연구를 통해 향후 거머리말의 번식방안을 강구하기 위한 기초자료를 제공하고자 본 연구를 시도하였다. 영양지는 지하경, 엽초 및 엽신으로 구성되어 있다. 영양지의 엽초는 볼록렌즈형인 4층의 집합엽과 중앙에 분화중인 2개의 선상엽이 있다. 외부 4층의 원형으로 둘러 싼 엽초는 한쪽은 2세포층으로 되고 반대편은 유세포가 다층구조를 이루고, 사이사이에 통기조직이 발달하였다. 이런 구조는 제 1엽초, 제 2엽초, 제 3엽초 및 제 4엽초로 가면서 서로 교호적인 배열 상태를 보였다. 엽신부의 양표면부 표피세포 층은 엽맥부위를 이루는 1~2세포로 된 피층세포가 연결되어 있고, 그 사이는 통기조직으로 되어 있다. 생식지는 원형 또는 타원형인 지하경, 줄기, 중심화축과 분지된 측화축인 소화축으로 구분된다. 소화축의 육수화서는 생식엽의 한쪽에 배열되어 불염포에 싸여 있다. 지하경, 줄기 및 중심화축은 전부 중앙에 유관속 1개, 양측에 각각 작은 것이 1개씩 총 3개가 존재하지만, 횡단한 지하경의 모양은 원형, 줄기는 장타원형 그리고 소화축은 볼록렌즈형이다. 줄기의 보강조직은 12~15세포 폭으로 지하경의 7~12층 보다 더 많은 세포층이다. 거머리말 종자의 종피는 섬유상 보강조직이 잘 발달되어 있어서 발아하기 전에 해수의 침투를 막는 기능을 하고, 외부압에 견딜 수 있는 구조로 발달되었다. 따라서 볼록렌즈형의 엽초에서 원형 집합잎은 교호적인 다층상 구조를 함으로서 해류의 흐름에 잘 견딜 수 있는 탄성구조고 형태적 적응을 보였다. 생식지는 원형 또는 타원형인 가늘고 긴 줄기와 가지를 만들어 해류의 영향을 최소화시키는 형태적 적응구조를 발달시켰다.

다엽콜리메이터에 의한 조사경계면에서의 요동현상을 완화시켜주는 가상미세다엽콜리메이터의 임상 적용 (Clinical Implementation of a Virtual-Micro MLC for Smoothing MLC Field Edge)

  • 조병철;박희철;배훈식
    • 한국의학물리학회지:의학물리
    • /
    • 제15권3호
    • /
    • pp.167-172
    • /
    • 2004
  • 지멘스(Siemens)사에서 개발된 가상미세다엽콜리메이터인 HD-270은, 전형적 다엽콜리메이터에 있어 폭의 유한성 때문에 불필요하게 발생하는 조사경계면의 요동현상을 완화시켜준다. 저자들은 이 기법을 사용했을 때의 선량분포의 변화를 확인하고, 치료계획단계에서 이를 평가해 볼 수 있도록 Pinnacle (Philips Radiation Oncology Systems, 미국) 전산화치료계획장치에 구현하였다. 그리고 임상적용에 앞서 선량학적 특성을 파악하기 위해, 가상미세다엽콜리메이터의 해상도, 조사경계면과 다엽콜리메이터가 형성하는 각도가 요동현상 및 유효반음영에 미치는 영향을 평가하였다. 또한 가상미세다엽콜리메이터 구현에 수반되는 치료테이블 움직임에 대한 위치 정확도를 평가하였다. HD-270의 임상적용을 위해 추가적으로 소요되는 치료계획과 치료 시간은 무시할 수 있음을 확인할 수 있었다.

  • PDF

Altering Conidial Dispersal of Alternaria solani by Modifying Microclimate in Tomato Crop Canopy

  • Jambhulkar, Prashant Prakash;Jambhulkar, Nitiprasad;Meghwal, Madanlal;Ameta, Gauri Shankar
    • The Plant Pathology Journal
    • /
    • 제32권6호
    • /
    • pp.508-518
    • /
    • 2016
  • Early blight of tomato caused by Alternaria solani, is responsible for severe yield losses in tomato. The conidia survive on soil surface and old dry lower leaves of the plant and spread when suitable climatic conditions are available. Macroclimatic study reveals that highest inoculum concentration of Alternaria spores appeared in May 2012 to 2013 and lowest concentration during January 2012 to 2013. High night temperature positively correlated and significantly (P < 0.01) involved in conidial spore dispersal and low relative humidity (RH) displayed significant (P < 0.05) but negative correlation with conidial dispersal. The objective of the study was to modify microclimatic conditions of tomato crop canopy which may hamper conidial dispersal and reduce disease severity. We evaluated effect of marigold intercropping and plastic mulching singly and in consortia on A. solani conidial density, tomato leaf damage and microclimatic parameters as compar to tomato alone (T). Tomato-marigold intercropping-plastic mulching treatment (T + M + P) showed 35-39% reduction in disease intensity as compared to tomato alone. When intercropped with tomato, marigold served as barrier to conidial movement and plastic mulching prevented evapotranspiration and reduced the canopy RH that resulted in less germination of A. solani spores. Marigold intercropping and plastic mulching served successfully as physical barrier against conidial dissemination to diminish significantly the tomato foliar damage produced by A. solani.

DRASTIC IMPROVEMENT OF THERMAL EFFICIENCY BY RAPID PISTON-MOVEMENT NEAR TDC

  • Moriyoshi, Y.;Sano, M.;Morikawa, K.;Kaneko, M.
    • International Journal of Automotive Technology
    • /
    • 제7권3호
    • /
    • pp.295-301
    • /
    • 2006
  • A new combustion method of high compression ratio SI engine was studied and proposed in order to achieve high thermal efficiency, comparable to that of CI engine. Compression ratio of SI engine is generally restricted by the knocking phenomena. A combustion chamber profile and a cranking mechanism were studied to avoid knocking with high compression ratio. Because reducing the end-gas temperature will suppress knocking, a combustion chamber was considered to have a wide surface at the end-gas region. However, wide surface will lead to large heat loss, which may cancel the gain of higher compression ratio operation. Thereby, a special cranking mechanism was adapted which allowed the piston to move rapidly near TDC. Numerical simulations were performed to optimize the cranking mechanism for achieving high thermal efficiency. An elliptic gear system and a leaf-shape gear system were employed in numerical simulations. Livengood-Wu integral, which is widely used to judge knocking occurrence, was calculated to verify the effect for the new concept. As a result, this concept can be operated at compression ratio of fourteen using a regular gasoline. A new single cylinder engine with compression ratio of twelve and TGV(Tumble Generation Valve) to enhance the turbulence and combustion speed was designed and built for proving its performance. The test results verified the predictions. Thermal efficiency was improve over 10% with compression ratio of twelve compared to an original engine with compression ratio of ten when strong turbulence was generated using TGV, leading to a fast combustion speed and reduced heat loss.

CF&GF Hybrid Prepreg 적층 패턴에 따른 Z-Spring의 기계적 물성 향상에 관한 연구 (Enhancing the Mechanical Properties of Z-Spring by Implementing CF&GF Hybrid Prepreg Lamination Patterns)

  • 김정근;최선호;김영근;김홍건;곽이구
    • 한국기계가공학회지
    • /
    • 제20권3호
    • /
    • pp.53-59
    • /
    • 2021
  • In vibration-free vehicles such as limousine buses, the vibration is minimized by installing an air spring instead of the leaf spring used in the existing freight cars to prevent the damage to the loaded cargo from shocks generated during movement. In the existing vehicles, steel structures support the air spring system. This study was aimed at replacing the steel structures used in the Z-spring by carbon fiber and glass fiber reinforced plastics. In addition, the mechanical properties (elastic modulus, tensile strength, and shear strength) of carbon fiber and glass fiber prepreg were derived using specimens molded with the corresponding prepreg. The final goal was to develop a material lighter than the conventional steel material but with enhanced mechanical properties. Although the CF prepreg exhibited excellent mechanical properties, the production cost was extremely high. To overcome this limitation, hybrid composites with GF prepreg were examined, which are expected to be promising future materials.

블루베리에 발생하는 말채나무공깍지벌레의 계절적 발육과 방제 (Seasonal Development and Control of Parthenolecanium corni in Blueberry Shrubs)

  • 이석민;정부근;강동완;박경미;한인영;권진혁;이흥수
    • 한국응용곤충학회지
    • /
    • 제60권4호
    • /
    • pp.403-415
    • /
    • 2021
  • 말채나무공깍지벌레의 계절적 발육을 2019년 6월 4일(약충) 부터 2020년 6월 25일까지(1세대 약충) 경상남도 사천시 소재의 블루베리 과원에서 관찰하였다. 본 충의 발육을 연구하기 위해서 2018년 눈에서 발아한 5개 이상의 잔가지를 1주 간격으로 농가에서 채취하였다. 깍지벌레의 발육은 실체현미경 하에서 조사하였고 화학적 방제는 시중에서 이용할 수 있는 3종의 살충제로 블루베리 과원에서 수행하였다. 발육기간과 유효적산온도(Centigrade Degree-Days accumulation, DDC)에 대한 결과는 다음과 같다. 산란기간(최성기): 2020년 5월 12 -26일(DDC, 110.0-188.5(173.6)); 부화기간(최성기): 2020년 6월 9 - 23(19)일)(DDC, 325.2-480.8(435.6); 난기간: 26 일; 월동성충으로부터 약충의 신엽으로 이동: 2020년 6월 16-25 일(DDC, 410,5 - 500.4); 성충으로 발육하기 위한 잎에서 잔가지로 이동(최성기): 2020년 2월 4 -18(8)일. 성충 한마리 당 산란수(범위): 956.8 ± 73.4 (13 - 3497); 알의 크기(mm): 0.29 ± 0.020(L), 0.15 ± 0.013(W); 부화약충의 크기: 0.35 ± 0.018(L), 0.18 ± 0.007(W), 0.09 ± 0.007(눈 간격); 성충크기: 4.30 ± 0.893(L), 2.64 ± 0.520(W). 월동성충으로부터 부화한 약충은 신초의 잎 뒷면에서 다음해 2월 초순 잎이 떨어질 때까지 약 95%가 발견되었다. 이들은 2령충으로 월동하고 1년에 한 세대를 경과하였다. 기어다니는 1령충을 방제하기 위하여 3종의 살충제를 7월 16일과 30일에 거북밀깍지벌레에 등록된 농도로 처리하였다. 아세타미프리드수화제가 1회 처리 21일 후에 96.9%의 사충율을 나타내었다.

끈끈이주걱속 점착식 포충엽의 분비모 발달 (Development of the Glandular Trichomes in Trapping Leaves of Drosera Species)

  • 이혜진;김인선
    • Applied Microscopy
    • /
    • 제39권1호
    • /
    • pp.57-64
    • /
    • 2009
  • 점착식 포충엽을 형성하는 식충식물은 포충엽 표피조직에 발달하는 분비모에서 점액성 물질을 분비하여 곤충을 포획한다. 본 연구에서는 점착식 포충엽을 형성하여 식충의 기능을 수행하는 끈끈이주걱속의 비나타와 피그미 2종의 분비모 분화 발달양상을 형태구조 및 세포학적으로 연구하였다. 분화초기 코일형태의 정단에서 발달하는 비나타의 엽원기는 표피에 미분화된 불규칙적인 형태의 모용이 밀생하였으며, 정단 부위는 신장 후 분지되면서 엽연과 엽신에는 capitate형과 peltate형 분비모들이 발달하였다. 피그미의 어린 포충엽은 엽연의 미분화된 모용들이 구심적으로 접힌 상태로 발달하나, 엽육조직 생장에 따라 길게 신장된 capitate형으로 분화되어 방사상으로 배열하였다. 실험된 2종의 포충엽은 분비모 특성에 의한 상 하피의 분화가 뚜렷하였으며, 상피 엽신과 엽연에는 분비물질을 방출하는 다양한 분비모가 밀생하였다. 상피의 경우, 비나타 분비모는 병세포가 신장된 capitate형과 무병의 peltate형으로 대별되고, 피그미는 병세포의 길이를 달리하는 capitate형만 발달하였다. 특히, 비나타는 엽연에 약 $2.2{\sim}3.4mm$에 이르는 긴 capitate형 분비모를 형성하였고, 피그미 엽연에는 위 유형과 함께 라켓 형태의 두정 부위를 지니고 약 $3.7{\sim}4.2mm$로 신장된 독특한 유형의 2 종류 capitate형 분비모가 분포하였다. 하피의 경우, 비나타에서는 작은 peltate형 분비모만 발달하였고, 피그미에서는 capitate형과 유사하나 capitate와 peltate형의 중간적인 특징을 지닌 매우 축소된 분비모를 형성하였다. 이들 분비모 두정부위의 분비세포 세포질에는 미토콘드리아 및 소포체, 골지체 등이 잘 발달하였고, 소액포들의 융합으로 큰 분비강이 형성되어 축적된 물질을 외부로방출하였다. 표피조직에 밀생하는 capitate 및 peltate형 분비모에서 방출된 점액성 물질은 포충엽 표면에 곤충 접촉 시 엽연 capitate형 분비모에 의한 굴곡운동과 엽신 분비모의 활성화를 유도하여 더욱 능동적으로 곤충을 포획하였다. 본 연구에서 밝혀진 비나타 및 피그미에 대한 분비모의 구조적 정보는 이후 Drosophyllum, Pinguicula 등의 다른 점착식 포충엽 형성 종들의 분비모 분화 양상과 비교 분석되면 유용하게 활용될 수 있는 자료가 될 것이다.

The Trend of Cigarette Design and Tobacco Flavor System Development

  • Wu, Jimmy Z.
    • 한국연초학회지
    • /
    • 제24권1호
    • /
    • pp.67-73
    • /
    • 2002
  • In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

Populus alba × glandulosa 와 그의 양친종(両親種)의 형태(形態), 해부학(解剖學), 생리학적(生理学的) 연구(硏究) (Studies on the Morphological, Anatomical and Physiological Characters in Populus alba × glandulosa and its Parent)

  • 김정석;전상근;황진성
    • 한국산림과학회지
    • /
    • 제49권1호
    • /
    • pp.11-31
    • /
    • 1980
  • 주요조림수종(主要造林樹種)인 Populus alba ${\times}$ glandulosa에 대(対)하여 형태학(形態学), 해부학(解剖学) 그리고 생리학적(生理学的) 조가(調査)를 하여 다음과 같은 결과(結果)를 얻었다. 1. P. alba ${\times}$ glandulosa의 엽외형(葉外形)의 많은 형질(形質)과 Catkin의 Chaff의 외형(外形)은 불완전우성(不完全優性)이고, 밀선(蜜腺)은 우성(優性)으로 유전(遺伝)한다. 2. 선발(選抜)된 15Clone의 성비(性比)는 ♂성(性)이 9개체(個体), ♀성(性)이 2개체(個体), ♂ ♀동주(同株)가 2Clone 이다. 3. 수피(樹皮)에는 잘 발달(発達)한 Cork층(層)과 인피(靭皮) 섬유조직(纖維組織)이 있다. 4. Primodial leaf에서 3층(層)의 세포조직(細胞組織)으로 구성(構成)되는 시기(時期)의 엽(葉)과 책상(柵狀)과 해면조직(海綿組織)의 분화(分化)가 아직 일어나지 않은 시기(時期)의 엽(葉)은 발생부위(発生部位)가 다르다. 5. 엽적(葉跡)의 조직(組織)은 유관속(維管束)이 연결(連結)되었든 곳과 그렇지 않은 곳의 2종류(種類)의 조직(組織)으로 구성(構成)되는데 유관속(維管束)이 연결(連結)되었든 곳의 조직(組織)은 2~3층(層)의 Cork 세포(細胞)로만 외부(外部)와 차단(遮断)하고 있다. 6. 엽병(葉炳)의 유관속(維管束)의 배열상태(配列狀態)는 심(甚)히 복잡(複雑)하다. 7. P. alba ${\times}$ glandulosa의 생장(生長)은 외온(外溫), 일장(日長), 광량(光量)에 민감(敏感)하였는데, 수고(樹高)에서 더욱 심(甚)하였다. 8. 평지양토(平地壤土)에 $60{\times}60cm$로 식재(植栽)한 환경(環境)에서 P. alba ${\times}$ glandulosa의 최고인자(最高因子)를 추구(推究)할 수 있을것같다. 9. 15Clone의 발근성(抜根性)은 외인(外因)에 따라 다르게 나타난다. 10. P. alba ${\times}$ glandulosa는 포장용수량(圃場容水量)에 대(対)한 평균용수율(平均容水率)이 80% 전후(前后)일때, 가장 생장(生長)이 좋다. 11. 급경사지(急傾斜地)의 토양함수량(土壤含水量)의 감소속도(減少速度)는 완경사지(緩傾斜地)보다 속(速)하여, 수분격감(水分激減)으로 인(因)하여 생장(生長)이 억제(抑制)되는 것 같다. 12. 동계(冬季)의 남측방위(南測方位)의 간수온(幹樹溫)에 있어 10cm 부위이하(部位以下)의 체내(体內), 외간(外間)의 온도차(溫度差)는 어느계절(季節), 어느 방위(方位)보다도 크다. 13. 수액유속(樹液流速)은 임내관계온(林內関係溫), 습도(湿度)와 체내(体內)의 함수율(含水率)에 크게 영향 받는다. 14. 피층(皮層)의 전당량(全糖量)의 증감(増減)은 계절(季節)과 관계(関係)있고, 간(幹)의 부위(部位)와는 무관(無関)하다. 15. 15Clone의 엽(葉)의 Isoperoxidase 변화(变化)는 Clone 간(間)에 심(甚)히 상이(相異)하나, Clone식별(識別)에 이용(利用)될 수 있다.

  • PDF