• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.305-312
• /
• 2014

Purpose : The purpose of this study is to analyze the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC) and determine the appropriate period of quality assurance (QA). Materials and Methods : The quality assurance of the DMLC equipped with Millennium 120 leaves has been performed total 92 times from January 2012 to June 2014. The the accuracy of leaf position and isocenter coincidence for MLC were checked using the graph paper and Gafchromic EBT film, respectively. The stability of leaf speed was verified using a test file requiring the leaves to reach maximum leaf speed during the gantry rotation. At the end of every leaf speed QA, dynamic dynalog files created by MLC controller were analyzed using dynalog file viewer software. This file concludes the information about the planned versus actual position for all leaves and provides error RMS (root-mean square) for individual leaf deviations and error histogram for all leaf deviations. In this study, the data obtained from the leaf speed QA were used to screen the performance degradation of leaf speed and determine the need for motor replacement. Results : The leaf position accuracy and isocenteric coincidence of MLC was observed within a tolerance range recommanded from TG-142 reports. Total number of motor replacement were 56 motors over whole QA period. For all motors replaced from QA, gradually increased patterns of error RMS values were much more than suddenly increased patterns of error RMS values. Average error RMS values of gradually and suddenly increased patterns were 0.298 cm and 0.273 cm, respectively. However, The average error RMS values were within 0.35 cm recommended by the vendor, motors were replaced according to the criteria of no counts with misplacement > 1 cm. On average, motor replacement for gradually increased patterns of error RMS values 22 days. 28 motors were replaced regardless of the leaf speed QA. Conclusion : This study performed the periodic MLC QA for analyzing the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC). The leaf position accuracy and isocenteric coincidence showed whthin of MLC evaluation is observed within the tolerance value recommanded by TG-142 report. Based on the result obtained from leaf speed QA, we have concluded that QA protocol of leaf speed for DMLC was performed at least bimonthly in order to screen the performance of leaf speed. The periodic QA protocol can help to ensure for delivering accurate IMRT treatment to patients maintaining the performance of leaf speed.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.101-104
• /
• 2001

작물 발육단계의 정확한 진단은 그 시기의 생리적 반응을 이해하고 정확하고 정밀한 생육관리를 위해서 절대적으로 필요한 요소이다. 지금까지 벼의 발육단계 예측을 위한 모델에는 GDD를 이용하는 방법(이, 1972), 한 단계의 발육을 완료하는데 걸리는 기간(t)과 이 기간중의 평균기온, 평균일장의 단순회귀 또는 중회귀를 구하는 방법(Gao et al, 1989; Yin et al, 1995; 임, 1982), 평균발육속도(1/t)를 이 기간중의 평균온도와 평균일장의 함수로 표현해서 이를 적산하여 1이 되었을 때를 발육완료일로 나타내는 방법(이, 1987; 신 등, 2000), 발육기간이 시계열자료를 모두 고려하여 함수를 이용하지 않는 non-parametric 방법(이, 1991) 등이 있다.(중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.253-263
• /
• 2016

Chrysanthemum production would benefit from crop growth simulations, which would support decision-making in crop management. Chrysanthemum is a typical short day plant of which floral initiation and development is sensitive to photoperiod. We developed a model to predict phenological development and leaf appearance of chrysanthemum (cv. Baekseon) using daylength (including civil twilight period), air temperature, and management options like light interruption and ethylene treatment as predictor variables. Chrysanthemum development stage (DVS) was divided into juvenile (DVS=1.0), juvenile to budding (DVS=1.33), and budding to flowering (DVS=2.0) phases for which different strategies and variables were used to predict the development toward the end of each phenophase. The juvenile phase was assumed to be completed at a certain leaf number which was estimated as 15.5 and increased by ethylene application to the mother plant before cutting and the transplanted plant after cutting. After juvenile phase, development rate (DVR) before budding and flowering were calculated from temperature and day length response functions, and budding and flowering were completed when the integrated DVR reached 1.33 and 2.0, respectively. In addition the model assumed that leaf appearance terminates just before budding. This model predicted budding date, flowering date, and leaf appearance with acceptable accuracy and precision not only for the calibration data set but also for the validation data set which are independent of the calibration data set.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.195-201
• /
• 2001

Sowing date experiments were carried out by employing a rice variety "Kwanganbyeo" in both field and phytotron with natural daylength. In phytotron, temperatures were controlled at daily mean of 21$^{\circ}C$ and 24$^{\circ}C$. The responses of final leaf number and beading date were analyzed in relation to daylength during photo-sensitive period (PSP). Based on the component models predicting the final leaf number and leaf appearance rate, a rice phenology model was established and verified. Days from sowing to flowering (DSF) were shortened and final number of leaves (FNL) increased as sowing dates were delayed from 25 April to 5 June in field and phytotron. The increased leaf appearance rate (LAR) and the reduced FNL, respectively, due to the higher temperature and the shorter daylength in delayed sowings in the field brought about greater shortening of DSF than in the phytotron where only FNL was reduced by shorter daylength in delayed sewings. FNL showed very close relationship with the average daylength during PSP of six-leaf stage to panicle initiation, being well fitted to the following rational function ($R^2$=0.98):(equation omitted) where D is daylength and a, b, and c are the constants that were estimated as 14.694, -0.992, and -0.068 in Kwanganbyeo, respectively. The rice phonology model, which was composed of two component models for LAR and FNL, predicted DSF very accurately. The differences between the observed and predicted DSF was less than two days in the sewing date field experiments in 1999 and 2000 of which data were not used for the model construction.struction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.202-208
• /
• 2001

Under the constant daylength of 13 hours and growth temperatures of 15$^{\circ}C$ to 27$^{\circ}C$, the final number of loaves (FNL) on the main culm was constant as 15 regardless of temperature in rice variety 'Kwanganbyeo'. Leaf appearance rate (LAR) increased with rising temperature and decreased with phenological development. Threshold temperature (T$_{o}$) was not constant across growth stages, but increased with phenological development. Effective accumulated temperature (EAT), which is calculated by the summation of values subtracting T0 from daily mean temperature, is closely related with number of leaves appeared (LA). LA was fitted to bilinear, quadratic, power and logistic function of EAT. Among the functions, logistic function had the best fitness of which coefficient of determination was $R^2$=0.995. Therefore, LAR prediction model was established by differentiating this function in terms of time: (equation omitted). where dL/dt is LAR, T$_1$ is daily mean temperature, L is the number of leaves appeared, and a, b, and c are constants that were estimated as 41.8, 1098.38, and -0.9273, respectively. When predictions of LA were made by LAR prediction model using data independent of model establishment, the observed and predicted LA showed good agreement of $R^2$$\geq$0.99.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.353-356
• /
• 2020

The pselaphine beetle, tribe Bythinoplectini is recorded from Korea for the first time, represented by a single species, Parapyxidicerus carinatus Sawada, 1964 previously only known from Japan. Three specimens were collected in northern part of South Korea (Gyeonggi and Gangwon Provinces) by sifting leaf litter near stream. Illustrations of a habitus, diagnostic characteristics of the tribe, genus and species, and distributional map are provided.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.411-417
• /
• 2017

Environmental and growth factors such as light intensity, vapor pressure deficit, and leaf area index are important variables that can change the transpiration rate of plants. The objective of this study was to compare the transpiration rates estimated by modified Penman-Monteith model and artificial neural network. The transpiration rate of paprika (Capsicum annuum L. cv. Fiesta) was obtained by using the change in substrate weight measured by load cells. Radiation, temperature, relative humidity, and substrate weight were collected every min for 2 months. Since the transpiration rate cannot be accurately estimated with linear equations, a modified Penman-Monteith equation using compensated radiation (Shin et al., 2014) was used. On the other hand, ANN was applied to estimating the transpiration rate. For this purpose, an ANN composed of an input layer using radiation, temperature, relative humidity, leaf area index, and time as input factors and five hidden layers was constructed. The number of perceptons in each hidden layer was 512, which showed the highest accuracy. As a result of validation, $R^2$ values of the modified model and ANN were 0.82 and 0.94, respectively. Therefore, it is concluded that the ANN can estimate the transpiration rate more accurately than the modified model and can be applied to the efficient irrigation strategy in soilless cultures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.441-448
• /
• 2013

This paper presents the fast multipole boundary element method (FM-BEM) as a new BEM solution methodology that overcomes many disadvantages of conventional BEM. In conventional BEM, large-scale problems cannot be treated easily because the computation time increases rapidly with an increase in the number of boundary elements owing to the dense coefficient matrix. Analysis results are obtained to compare FM-BEM with conventional BEM in terms of computation time and accuracy for a simple two-dimensional steady-state heat conduction problem. It is confirmed that the FM-BEM solution methodology greatly enhances the computation speed while maintaining solution accuracy similar to that of conventional BEM. As a result, the theory and implementation algorithm of FM-BEM are discussed in this study.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.225-230
• /
• 2011

This research was performed for making data-base of cross-breeding between Cymbidium goeringii cultivars. Morphological characteristics were investigated and then genetic relationship was analyzed. Collected 20 Cymbidium goeringii cultivars were clustered into 2 groups. Seven cultivars were clustered into group I, and thirteen cultivars were clustered into group II. Group I doesn't have leaf pattern. Group have leaf pattern. The genetic relationship among collected 20 Cymbidium goeringii cultivars was anaylzed using RAPD with ten 10-mers random primer. Eighty-nine bands were generated by RAPD. Among the rest, three bands were monomorphic and eight-six bands were polymorphic. Overall similarity degree ranged from 0.521 to 0.862. The result of RAPD analysis was clustered into 2 groups, too. Sixteen cultivars were clustered into GroupX, and four cultivars were clustered into GroupY. Result of classification with morphological characteristics and RAPD showed different pattern, but 4 cultivars of GroupY by RAPD analysis were included in groupby morphological characteristics. Crossbreeding combination among low related coltivars in RAPD analysis may get more efficient result.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2011

This study was carried out to clarify precise $CO_2$ demands of paprika plants (Capsicum annumm L.) by measuring photosynthesis rates of the leaves in high, low positions, and the $CO_2$ consumption of a whole plant in a large sealed chamber. A photosynthesis measuring system (LI-6400) was used to measure the photosynthetic rates of the leaves located in different positions. A large sealed chamber that can control inside environmental factors was developed for measuring $CO_2$ consumption by a whole paprika plant. With increase of radiation, photosynthetic rates of the leaves in higher position became larger than those in lower position. The $CO_2$ consumption by the plant was estimated by using decrement of $CO_2$ concentration from initial level of 1500 ${\mu}mol{\cdot}mol^{-1}$ in the chamber with increase of integrated radiation. A regression model for estimating $CO_2$ consumption by the plant (leaf area = 7,533.4 $cm^2$) was expressed with integrated radiation (x) and was suggested as $y=-0.06234+3.671^*x/(2.589+x)$ ($R^2=0.9966^{***}$). The photosynthetic rate of the whole plant measured in the chamber was 3.4 ${\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under 300 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity, which is in-between photosynthetic rates of the leaves in high and low positions. For this reason, some differences between required and supplied $CO_2$ amounts in greenhouses might occur when depending too much on photosynthetic rates of leaves. Therefore, we can estimate more accurately $CO_2$ amount required in commercial greenhouses by using $CO_2$ consumption model of a whole plant obtained in this study in addition to leaf photosynthetic rate.