• Applied Microscopy
• /
• v.36 no.4
• /
• pp.235-250
• /
• 2006

A protective effect of activated charcoal against the acute lead poisoning of kidney was studied in mile. Mice approximately 30 gm in weight were grouped into the control, lead acetate-treated, and activated charcoal-treated after lead acetate groups. Lead acetate (60 mg/kg) and activated charcoal (40mg/kg) were delivered orally. Serum AST, ALT and glucose were measured and the ultrastructural alteration of liver was examined by electron microscopy. Activated charcoal decreased the increase of serum AST, ALT and glucose levels induced by lead. Lead acetate-treated hepatic cells characterized by irregular nuclei, enlarged and reduced number of mitochodria, enlarged rough endoplasmic reticulum, loss of riboscomes. Cells treated with activated charcoal were similar to those of the control group. In conclusion, activated charcoal may protect the lead-induced toxicity on liver.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1213-1224
• /
• 2024

The liquid lead-bismuth cooled fast reactor has been in a single-phase, low-pressure, and high-temperature state for a long time during operation. Considering the requirement of calculation efficiency for long-term transient accident calculation, based on a homogeneous hydrodynamic model, one-dimensional heat conduction model, coolant flow and heat transfer model, neutron kinetics model, coolant and material properties model, this study used the fully implicit difference scheme algorithm of the convection-diffusion term to solve the basic conservation equation, to develop the transient analysis program NUSOL-LMR 2.0 for the lead-bismuth fast reactor system. The steady-state and typical design basis accidents (including reactivity introduction, loss of flow caused by main pump idling, excessive cooling, and plant power outage accidents) for the ABR have been analyzed. The results are compared with the international system analysis software ATHENA. The results indicate that the developed program can stably, accurately, and efficiently predict the transient accident response and safety characteristics of the lead-bismuth fast reactor system.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.467-482
• /
• 2004

One of the uncertain damage parameters to jeopardize the safety of existing PSC bridges is the loss of the prestress force. A substantial prestress-loss can lead to severe problems in the serviceability and safety of the PSC bridges. In this paper, a nondestructive method to detect prestress-loss in beam-type PSC bridges using a few natural frequencies is presented. An analytical model is formulated to estimate changes in natural frequencies of the PSC bridges under various prestress forces. Also, an inverse-solution algorithm is proposed to detect the prestress-loss by measuring the changes in natural frequencies. The feasibility of the proposed approach is evaluated using PSC beams for which a few natural frequencies were experimentally measured for a set of prestress-loss cases. Numerical models of two-span continuous PSC beams are also examined to verify that the proposed algorithm works on more complicated cases.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.623-641
• /
• 2012

The Janggun lead-zinc-silver deposit is hydrothermal-metasomatic deposit. We have sampled wallrock, hydrother-maly-altered rock and lead-zinc-silver ore vein to study the element dispersion during wallrock alteration. The hydrothermal alteration that is remarkably recognized at this deposit consists of rhodochrositization and dolomitization. Wallrock is dolomite and limestone that consisit of calcite, dolomite, quartz, phlogopite and biotite. Rhodochrosite zone occurs near lead-zinc-silver ore vein and include mainly rhodochrosite with amounts of calcite, dolomite, kutnahorite, arsenopyrite, pyrite, chalcopyrite, sphalerite, galena and stannite. Dolomite zone occurs far from lead-zinc-silver ore vein and is composed of mainly dolomite and minor calcite, rhodochrosite, pyrite, sphalerite, chalcopyrite, galena and stannite. The correlation coefficients among major, trace and rare earth elements during wallrock alteration show high positive correlations(dolomite and limestone = $Fe_2O_3(T)$/MnO, Ga/MnO and Rb/MnO), high negative correlations(dolomite = MgO/MnO, CaO/MnO, $CO_2$/MnO, Sr/MnO; limestone = CaO/MnO, Sr/MnO). Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, MnO, As, Au, Cd, Cu, Ga, Pb, Rb, Sb, Sc, Sn and Zn. Remarkable loss elements are CaO, $CO_2$, MgO and Sr. Therefore, elements(CaO, $CO_2$, $Fe_2O_3(T)$, MgO, MnO, Ga, Pb, Rb, Sb, Sn, Sr and Zn) represent a potential tools for exploration in hydrothermal-metasomatic lead-zinc-silver deposits.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.2
• /
• pp.43-47
• /
• 2003

Lead zirconate titanate (PZT) thin films were fabricated by the pulsed laser ablation deposition (PLAD) method onto Pt/Ti/SiO$_2$/Si substrates. Crystalline phases as well as preferred orientations in PZT films were investigated by X-ray diffraction analysis (XRD). The well-crystallized perovskite phase and the (101) preferred orientation were obtained by two-step annealing at the conditions of $650^{\circ}C$, 1 hour. It was found that the temperature for the pulsed laser ablated PZT films annealed via a two-step annealing process can be reduced 20$0^{\circ}C$ compared to that of the conventional three-step annealing temperature profile for enhancing the transformation of the perovskite phase. The remanent polarization and the coercive field of this film were about 20 $\mu$C/$\textrm{cm}^2$ and 46 kV/cm, while the dielectric constant and loss values measured at 1 KHz were approximately 860 and 0.04, respectively. The interesting phenomena of this film, such as vertical shift in hysteresis curve, are also discussed.

• Journal of Chest Surgery
• /
• v.14 no.2
• /
• pp.168-174
• /
• 1981

Since cardiac pacemaker was first totally implanted by Chardack, Gage and Greatbatch [1966], the electrical circuity of the cardiac pacemaker has been improved, modified, and refined. The problem of transvenous electrodes, however, is still remained; this may be due to electrode displacement, exit and/or entrance block, lead fracture and insulation defects. In permanent cardiac pacing, Irreversible loss of function of the transvenous electrode catheter eventually requires insertion of new lead. Authors now report one case that disclosed easy displacement of electrode tip in early phase of implantation and then two years and five months later, malfunctioning electrode could not be withdrawn from the cardiovascular system because it has become firmly enclosed by fibrous tissue along its course from the vein tract to the right ventricle. Under such circumstances, the electrode catheter tip was left in tricuspid annulus after being sutured at its entrance and burying the loop of lead in generator pocket. New other one electrode was then reimplantation through left external jugular vein.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.23-26
• /
• 2011

The aim of this paper is to evaluate noise characteristics of an electric power driven hammer. These investigation and analysis were made according to the ISO 1680/1 and MIL-STD 7410-1 and lead-wrapping experiment method that was used to identify the principal noise sources and analyze its noise. Hammer generates loud noise and it irritates and affects many people. Repeated exposures to loud noise can lead people to permanent hearing loss. Based on the contribution analysis, we confirm that the striker part is a major noise source and it has directional noise radiation pattern, which is left and right.

• Journal of the Korean Ceramic Society
• /
• v.16 no.1
• /
• pp.31-37
• /
• 1979

The middle point of composition within the system $MgO-Al_2O_3-SiO_2$ has been studied for applicability as ceramics dielectrics. A Kyul Sung Tale of high purity, magnesia clinker of Sam-wha chemical company, C.P. aluminium oxide, calcium carbonate, red lead, barium carbonate which was made into frit were used the raw materials. A number of steatite ceramics were prepared under carefully controlled condition and the water absorption, linear shrinkage, power factor, dielectric constant and dielectric loss were measured at elevated temperature. When we used magnesia clinker as flux, the quantity of this flux was 0.05mole, sintering temperature was continued for 2 hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose power factor was 0.142%, water absorption was zero, linear shrinkage was 8.76%, dielectric constant was 5.63, dielectric loss was 0.00799. When we used red lead as flux, the quantity of this flux was 0.033mole and 0.066mole, sintering temperature was continued for 2hrs. at 1, 26$0^{\circ}C$. From this conditions, we could get the data whose water absorption was zero, linear shrinkage was 8.03%, and 8.48%, power factor was 0.136% and 0.062%, dielectric loss was 0.0072 and 0.0037. When we used barium carbonate made into frit as flux, the quantity of this flux was 0.02mole, sintering temperature was continued for 2hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose water absoption was zero, linear shrinkage was 8.44%, power factor was 0.138%, dielectric constant was 5.69, dielectric loss was 0.0074.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.4
• /
• pp.297-306
• /
• 1994

This experiment was carried out to investigate the healing loss and the heavy metal residues such as copper, zinc, manganese, cadmium and lead In porcine visceras by inductively coupled argon plasma spectrometer(ICP), and to probe changes when porcine visceras were boiling In water treatment(BWT), heating in autoclave treatment (HAT) and heating In oil treatment (HOT) . The range of heating loss on porcine viscera were BWT(23.11∼34.53%) , HAT(18.48∼28.00%) and HOT(14.20∼25.22%)and the heart tissue were higher and liver were lower than those of the other tissues. The total value of heavy metal residues in large intestine, small intestine, heart, kidney, liver and stomach tissue were 11.298${\pm}$5.302 ppm, 27.825${\pm}$8. 177 ppm, 16.756${\pm}$6.334 ppm 21.107${\pm}$6.057 ppm, 25.369 ${\pm}$ 10.164 ppm and 12.611 ${\pm}$5.513 ppm, respectively. Heavy metal residues in porcine visceras tended to decrease according to heating methods and the variety viscera, and the change of total heavy metal residues on BWT, HAT and HOT were 4.16∼32.57%, 12.01∼28.09% and 9.60∼25.76%, respectively. The decrease of lead element of mean value were 21.76% and copper, zinc, manganese and cadmium element were 18.00∼ 18.16%. The change of heavy metal residues were not significant in the porcine visceras(P>0.05), and the these were significantly correlated among the three heating method(P < 0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.147-151
• /
• 1986

A study was carried out to investigate yield, yield components, and change of chemical components in rice plants grown under different concentration of lead compound in nutrient solution of sandy culture. The results obtained are as follows. 1. Increasing lead concentration in culture solutions, pb content in the plant was increased and crop yields were decreased. 2. The critical pb concentration at which yield was declined, was 13.6 ppm. 3. As adding higher concentration of lead in nutrient solutions, concentration of lead in rice plant was significantly increased on leaf blade, and brown rice in pb. 4. Yield loss was closely related to pb content in leaf blade.