• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1614-1618
• /
• 2008

본 논문은 레이아웃 수정에 따른 수율차 계산을 위한 새로운 모델을 제안한다. 패턴 사이의 빈 공간의 크기를 늘리거나 줄이는 레이아웃 변경으로 인한 결함 평균치의 차를 구하기 위한 식이 단락 결함과 개방 결함에 대해 제시 되었다. 미세 패턴인 조그를 포함한 구부러진 연결선등을 가지는 복잡한 레이아웃 변경은 패턴을 작은 조각으로 쪼개고 패턴 사이의 공간과 패턴의 폭을 재정의 함으로써 새롭게 모델링 하였다. 이 모델은 레이아웃 변경에 의한 수율 변화와 결함 제한적 수율에 대한 비용함수 모니터링을 쉽게 할 수 있다는 장점을 갖는다.

• Architectural research
• /
• 제10권2호
• /
• pp.1-10
• /
• 2008

The study is to find possibilities and problems of a small-scale modification on movable storage furniture as an answer to the residents' needs. The study selected one of the renovated housing units at "KYUDOGAKUSHA" as a case study. "KYUDOGAKUSHA" was designed by architect Takeda Goichi in 1926 and was renovated in 2006. The study investigates major two aspects of movable storage furniture, which includes the furniture's layout planning and technical issues of assembling and moving moveable storage furniture. The experimental test result shows that, 1) It is clear that island type of movable storage furniture's layout can facilitate the residents'small-scale modification even though the residents are untrained. 2) To increase the assembling efficiency, the study found that it is necessary to improve the movable storage furniture's casters so that furniture can rotate. Certain moveable furniture which played a role as a connector between other furniture pieces was not able to move vertically and caused a load on other connected furniture; this needed an improvement.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권2호
• /
• pp.216-224
• /
• 2000

공간 계획 시스템(Spatial Layout Planning System)은 사용자의 요구에 따라 사각의 자원을 일정 공간 안에 할당하고 사용자의 만족도를 최대화함으로써 공간 효율성을 최적화하는 시스템이다. 공간 계획 문제는 방대한 범위의 공간을 탐색해야 하므로 시간과 공간적 측면에서 높은 복잡도(Complexity)를 갖는 문제이다. 또한 특정 영역의 수정 요구나 재설계 요구와 같은 사용자의 동적인 요구 사항들을 수용할 수도 있어야 한다. 본 논문에서는 CSP(Constraint Satisfaction Problems) 해결 기법 기반의 자원 할당법을 이용함으로써 효과적으로 공간 계획 문제를 해결할 수 있도록 하였으며 사용자의 요구에 따라 변화되는 제약조건은 지능형 사용자 인터페이스 모델을 통해 좀 더 향상된 결과가 도출될 수 있도록 설계 및 구현하였다. 또한, 2차원 도면에서의 수정 요구에 대한 편이성과 시각적 검증을 위해 웹 환경 하에서의 VRML(Virtual Reality Modeling Language)을 이용한 3차원 도면을 보여준다.

• 대한산업공학회지
• /
• 제28권1호
• /
• pp.57-62
• /
• 2002

The semiconductor industry has continuously been looking for the ways to improve yield and to reduce manufacturing cost. The layout modification approach, one of yield enhancement techniques, is applicable to all design styles, but it does not require any additional resources in terms of silicon area. The layout modification method for yield enhancement consists of making local variations in the layout of some layers in such a way that the critical area, and consequently the sensitivity of the layer to point defects, is reduced. Chen and Koren (1995) proposed a greedy algorithm that removes defect sensitive area using via moving, but it is easy to fall into a local minimum. In this paper, we present a via moving algorithm using simulated annealing and enhance yield by diminishing defect sensitive area. As a result, we could decrease the defect sensitive area effectively compared to the greedy algorithm presented by Chen and Koren. We expect that the proposed algorithm can make significant contributions on company profit through yield enhancement.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.71-76
• /
• 2013

For a die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize the casting layout design of an automotive Oil Pan_DX2E, Computer Aided Engineering (CAE) simulation was performed with two layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the filling process with two models, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.830-833
• /
• 2005

SDM(Structural Dynamics Modification) is to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary(modifying) structures. In this paper, I will focus on the optimal layout of the stiffeners which are attached to the plate to maximize 1st natural frequency. Recently, a new topology method was proposed by yamazaki. He uses growing and branching tree model. I modified the growing and branching tree model. The method is designated modified tree model. To expand the layout of stiffeners, I will consider non-matching problem. The problem is solved by using local lagrange multiplier without the mesh regeneration. Moreover The CMS(Component mode synthesis) method is employed to reduce the computing time of eigen reanalysis using reduced componet models.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.666-669
• /
• 2004

Substructures position is considered as design parameter to obtain optimal structural changes to raise its dynamic characteristics. In conventional SDM (structural dynamics modification) method, the layout of modifying substructures position is first fixed and at that condition the structural optimization is performed by using the substructures size and/or material property as design parameters. But in this paper as a design variable substructures global translational and rotational position is treated. For effective structural modification the eigenvalue sensitivity with respect to that design parameter is derived based on measured frequency response function. The optimal structural modification is calculated by combining eigenvalue sensitivities and eigenvalue reanalysis technique iteratively. Numerical examples are presented to the case of beam stiffener optimization to raise the natural frequency of plate.

• Management Science and Financial Engineering
• /
• 제17권2호
• /
• pp.23-37
• /
• 2011

In this paper, we address a layout design problem for determining an optimal 4-class-based dedicated linear storage layout in a class of unit load storage systems. Assuming that space requirement for a class is the sum of the maximum inventory levels of products assigned to the class, and that one-way travel time is a linear function of storage index, we formulate a 4-class-based dedicated linear storage problem PTL[4] and provide an exact splitting algorithm with $O(n{\lceil}logn{\rceil})$. Our algorithms could be applied to more than a 4-class-based dedicated storage layout problem with slight modification in order to reduce computational execution time.

• Communications for Statistical Applications and Methods
• /
• 제3권1호
• /
• pp.145-153
• /
• 1996

Nonparametric tests for comparing umbrella pattern treatment effects with a control in a one-way layout were studied in Chen and Wolfe (1993). In this paper we propose a modification that improves the power of the Chen-Wolfe test. The results of a Monte Carlo power study are discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.599-604
• /
• 2002

Substructures position is considered as design parameter to obtain optimal structural changes to raise its dynamic characteristics. In conventional SDM (structural dynamics modification) method, the layout of modifying substructures position is first fixed and at that condition the structural optimization is performed by using the substructures size and/or material property as design parameters. But in this paper as a design variable substructures global translational and rotational position is treated. For effective structural modification the eigenvalue sensitivity with respect to that design parameter is derived based on measured frequency response function. The optimal structural modification is calculated by combining eigenvalue sensitivities and eigenvalue reanalysis technique iteratively. Numerical examples are presented to the case of beam stiffener optimization to raise the natural frequency of plate.