산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering)

  • 제36권4호
  • /
  • Pages.71-76
  • /
  • 2013
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)
한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)
권호 표지
DOI QR코드

DOI QR Code

유동해석을 이용한 자동차용 부품(오일팬_DX2E)의 주조방안설계에 대한 사례연구

A Case Study on Casting Layout Design of Automotive Oil Pan_DX2E Using Computer Simulation

  • 권홍규 (남서울대학교 산업경영공학과)
  • Kwong, Hongkyu (Dept. of Industrial and Management Engineering, Namseoul University)
  • 투고 : 2013.11.06
  • 심사 : 2013.12.05
  • 발행 : 2013.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For a die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize the casting layout design of an automotive Oil Pan_DX2E, Computer Aided Engineering (CAE) simulation was performed with two layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the filling process with two models, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system.

키워드

참고문헌

  1. Kwon, H.K. and Jang, M.K., Case Study for Developing Automobile Part (Steering Wheel) using Vacuum Die- Casting Mold. Journal of the Society of Korea Industrial and Systems Engineering, 2012, Vol. 35, No. 2, p 195- 202.
  2. Park, Y.K. and Yang, J.M., Scheduling of a Casting Sequence Under Just-In-Time (JIT) Production. Journal of the Society of Korea Industrial and Systems Engineering, 2009, Vol. 32, No. 3, p 40-48.
  3. Park, J.Y., Kim, E.S., Park, Y.H., and Park, I.M., Optimization of Casting Design for Automobile Transmission Gear Housing by 3D Filling and Solidification Simulation in Local Squeeze Diecasting Process. Korean Journal of Materials Research, 2006, Vol. 16, No. 11, p 668-675. https://doi.org/10.3740/MRSK.2006.16.11.668
  4. Shin, H.W., Chung, Y.J., and Kang, S.G., A Study on Die Casting Process of the Automobile Oil Pan Using the Heat Resistant Magnesium Alloy. Journal of KSEM, 2009, Vol. 17, No. 3, p 45-53.
  5. Kim, Y.C., Choi, S.W., Cho, J.I., Jeong, C.Y., and Kang, C.S., Optimization of the Thin-walled Aluminum Die Casting Die Design by Solidification Simulation. Journal of The Korea Foundry Society, 2008, Vol. 28, No. 4, p 190-194.
  6. Information on Anycasting; http://anycastsoftware.com/en/ software/fluid.php, 2013.
  7. Hong, S.K., Series I : Melting and casting of Aluminum Alloys. Journal of The Korea Foundry Society, 2008, Vol. 28, No. 2, p 45-51.
  8. Kim, E.S. and Park, J.Y., Kim, Y.H., Son, G.M., and Lee, K.H., Evaluation of Diecasting Mold Cooling Ability by Decompression Cooling System. Journal of The Korea Foundry Society, 2009, Vol. 29, No. 5, p 238-243.
  9. Garber, L.W., Theoretical analysis and experimental observation of air entrapment during cold chamber filling. Die Casting Engineer, 1980, Vol. 24, No. 2, p 24-26.