• 분석과학
• /
• 제5권1호
• /
• pp.111-114
• /
• 1992

$Ba(Zn_{1/3}Ta_{2/3})O_3$는 고온에서 열처리시 Zn과 Ta 이온이 ordering을 일으키며 이때 격자 비틀림이 일어난다. 본 실험에서는 이러한 격자비틀림을 X-선 분말회절법을 사용하여 1/10,000 이상의 정밀도로 측정하였으며, 그 결과 $Ba(Zn_{1/3}Ta_{2/3})O_3$는 $1350^{\circ}C$ 30분 소결시에도 상당한 정도의 격자 비틀림이 발생하며 이러한 격자비틀림은 소결시간이 길어질수록 증가함을 관찰하였다.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1515-1522
• /
• 1997

Several image coding algorithms have been developed for the telecommunication and multimedia systems with high image quality and high compression ratio. In order to achieve low entropy and distortion, the system should pay great cost of computation time and memory. In this paper, the uniform cubic lattice is chosen for Lattice Vector Quantization (LVQ) because of its generic simplicity. As a transform coding, the Discrete Wavelet Transform (DWT) is applied to the images because of its multiresolution property. The proposed algorithm is basically composed of the biorthogonal DWT and the uniform cubic LVQ. The multiresolution property of the DWT is actively used to optimize the entropy and the distortion on the basis of the distortion-rate function. The vector codebooks are also designed to be optimal at each subimage which is analyzed by the biorthogonal DWT. For compression efficiency, the vector codebook has different dimension depending on the variance of subimage. The simulation results show that the performance of the proposed coding mdthod is superior to the others in terms of the computation complexity and the PSNR in the range of entropy below 0.25 bpp.

• 한국결정학회지
• /
• 제12권1호
• /
• pp.14-19
• /
• 2001

Effects of electric-field-induced lattice distortion on the polarization and strain were investigated in Pb(Mg/sub 1/3/Nb/sub 2/3)O₃ relaxor ferroelectric ceramics in the temperature range of -50℃∼90℃. The ratio of residual strain and polarization (S/sub r//P/sub r/ rarely depends on the temperature. However, the ratio of the electric field included strain and polarization (S/sub induced//P/sub induced/) increased as the temperature decreases below phase transition temperature. To explain these experimental results, a simple rigid ion model concentrating on only Bo/sub 6/ octahedron was suggested.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권5호
• /
• pp.403-408
• /
• 1994

Dielectric and structural properties of $Ba_{1-x}$(Z $n_{1}$3/T $a_{2}$3/) $O_{3}$+1 mol% Mn $O_{2}$ (x=0, 0.01, 0.02, 0.03, 0.04) ceramics was investigated at microwave frequencies. With $Ba_{+2}$ shortage, the sinterability and the unloaded Q( $Q_{u}$) were much improved, and the ordering in B site and the lattice distortion was greatly enhanced and the structure approached the completely ordered structure. $Q_{u}$ was strongly correlated with these factors such as ordering ratio, lattice distortion and sinterability, and had the maximum value of 7500 at x=0.01. The dielectric constant was near 30 and the temperature coefficient of the resonant frequency was 2 ppm/.deg. C at x=0.01.1.1.1.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.112-114
• /
• 1994

When an electron is transferred to $C_{60}$, the bond structure is distorted due to the electron-lattice interaction and a polaron-like state is formed. The evolution process of the bond distortion is studied by the dynamical equation of atomic lattice, and time-dependent changes of the bond lengths are determined. Then it can be estimated that the relaxation time to form the polaron-like state is a fraction of a picosecond.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.73.2-73.2
• /
• 2007

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2634-2644
• /
• 1996

Two different low rate speech coders using one of four types of lattice vector quantizers(LVQ's) with fairly low complexity were investigated for an application to mobile communications. More specifically, two-stage vector quantizer-lattic vector quantizer(VQ-LVQ) systems and vector differenctial pulse code modulation(VDPCM)systems with lattice vector quantizers simulated to encode the line spectrum frequencies of various sentences at the rate 22 to 39 bits per 20 msec frame. The simulation results showed that the VDPCM system with the lattice VQ can save up to 10 bits/fram compared to the quantization scheme used in QCELP system. For the VQ-LVQ system, the spherical quasi-uniform LVQ below 36 bits/frame outperformed the other 3 types of LVQ's and the pyramidal quasi-uniform LVQ at 37 bits/frame outperformed the other 3 types of LVQ's with the spectral distortion 0.97.

• 한국결정성장학회지
• /
• 제30권1호
• /
• pp.7-11
• /
• 2020

TiZrN 코팅의 도핑 공정에서 탄소 페이스트 증착 방식에 따른 탄소의 용해성 변화를 격자왜곡(lattice distortion)과 원자농도(atomic concentration)를 통해 비교 및 고찰하였다. 딥코팅, 스핀코팅과 스크린프린팅 방식을 이용하여 탄소 페이스트를 도포한 후, 레이저를 조사하여 탄소 구배층(carbon gradient layer)을 형성시켰다. 모든 구배층은 탄소가 도핑되는 구조였으며, 두께 및 탄소 도핑량은 페이스트 도포 방식에 의존하였다. 결정 구조 분석 결과, 딥코팅에 의해 코팅층을 도핑할 때 보다 스핀코팅과 스크린프린팅에 의해 코팅층을 도핑하였을 때, 더 큰 격자 팽창이 일어남을 확인할 수 있었다. 또한 XPS depth profile을 통해 딥코팅에 의한 탄소 구배층 두께는 약 30 nm, 스핀코팅과 스크린프린팅의 경우 대략 100 nm로 더 깊은 구배층이 형성됨을 확인하였다. 침탄 전 코팅의 경도는 약 30 GPa였으며, 침탄 후에는 딥코팅 시편의 평균 경도가 약 31 GPa였고 스핀코팅과 스크린프린팅의 평균 경도는 대략 37 GPa로 증가한 것으로 보아 탄소 도핑을 통한 격자팽창 및 구배층의 영향을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.157-160
• /
• 2004

Ferroelectric $(Ba_xSr_{1-x})TiO_3$ (BST) thin films have been deposited on (001) MgO single crystals by a pulsed laser deposition (PLD) method. The structure of deposited BST thin films were investigated by an x-ray diffractometer. Calculated c-axis lattice parameters of the BST films exhibit a strong lattice distortion, which was not observed in ceramic BST at room temperature. This lattice distortion of BST has been attributed to strains caused by lattice constant difference between film and substrate, oxygen vacancies in BST film, and thermal expansion difference between film and substrate. Ferroelectric properties at 10 GHz have been measured using a HP 8510C vector network analyzer. Dielectric properties, capacitance tunability and quality factor, of the interdigitaed capacitors fabricated on BST films were calculated from the measured s-parameters. Two distinct behaviors in structural, opitical, and microwave properties of BST films were observed; below and above 200 mTorr of oxygen pressure in the deposition chmber.

• 대한의용생체공학회:의공학회지
• /
• 제17권2호
• /
• pp.247-254
• /
• 1996

The relationship between the isothermal age-hardening behavior and the phase transformation in the commercial dental Au-Ag-Cu-Pd alloy was investigated Age-hardening was mostly attributed to the lattice distortions of the supersaturated w phase resulting from the transformation to the metastable phasel which were more distinct at lower aging temperature. The lattice distortions resulting from the transformation of the metastable phases to the equilibrium phases also made a contribution to the age-hardening.