• 한국산림과학회지
• /
• 제85권1호
• /
• pp.120-129
• /
• 1996

본 연구는 우리 나라 대표적인 향토수종의 하나인 신갈나무의 수분 생리적 특성을 밝히고자 하는 일련의 연구로서, 줄기, 가지, 분지부분, 그리고 정단부 1년생 소지에 있어서 상대수분통도성, Leaf specific conductivity(LSC), Huber value, Specific conductivity, 부위별 평균도관직경, 단위면적당 도관수 등을 측정하여 수체내 수분통도성의 공간적 배치구조(Hydraulic architecture)를 비교 고찰하였다. 1. 신갈나무의 상대수분통도성은 줄기에서 $2.5526{\times}10^{-12}{\sim}1.2260{\times}10^{-10}m^2$, 가지에서 $1.6279{\times}10^{-11}{\sim}6.8378{\times}10^{-11}m^2$의 범위로 나타냈다. 상대수분통도성은 줄기와 가지의 직경이 작아질수록 큰 값을 나타냈다. 정단부 1년생 소지에 있어서는 주지가 측지보다 평균 2배 이상 큰 값을 나타냈다. 2. LSC는 줄기 하부에서 작은 값을 나타냈고, 상부로 갈수록 큰 값을 나타냈다. 그리고 줄기가 가지보다 월등히 큰 값을 보였으며, 분지부분이 가장 작은 값을 나타냈다. 3. 분지부분의 수분통도성값은 분지형태(ㅏ형과 Y형)에 따라 차이를 보였다. ㅏ형의 분지부분에서는 상대수분통도성, LSC, Specific conductivity, 평균도관직경 등이 줄기가 가지 보다 2 배 이상 큰 값을 나타냈고, Y형에서는 1~1.5배 더 컸다. 4. 줄기의 LSC, Specific conductivity, Huber value는 직경이 작아질수록 증가하였다. 5. 정단부 1년생 소지에 있어서 LSC, Huber value, 평균도관직경은 주지가 측지보다 큰 값을 나타냈다. 6. 줄기의 부위별 평균도관직경은 줄기의 직경이 작아질수록 감소한 반면, 단위면적당 도관수($mm^{-2}$)는 많아졌다. 줄기에 있어서 도관직경은 직경이 작아질수록 조재부에서 급격하게, 만재부에서는 완만하게 감소하였다.

• Journal of Yeungnam Medical Science
• /
• 제35권2호
• /
• pp.199-204
• /
• 2018

Background: The authors have performed ultrasound-guided stellate ganglion block (SGB) in our clinic using a lateral paracarotid approach at the level of the 6th cervical vertebra (C6). Although SGB at C6 is a convenient and safe method, there are ongoing concerns about the weak effect of sympathetic blockade in the ipsilateral upper extremity. Therefore, ultrasound-guided SGB was attempted using a lateral paracarotid approach at the level of the 7th cervical vertebra (C7). This prospective study aimed to compare changes in skin temperature after SGB was performed at C6 and C7, and to introduce a lateral paracarotid approach for SGB. Methods: Thirty patients underwent SGB twice: once at C6 and once at C7. For every SGB, the skin temperature of the patient's hypothenar area was measured for 15 min at 1-min intervals. Skin temperatures before and after SGB and side effects were compared between C6 and C7 groups. Results: The temperature of the upper extremity increased after SGB was performed at C6 and C7. There were significant differences between mean pre-SGB and the largest increases in post-SGB temperatures ($0.50{\pm}0.38^{\circ}C$ and $1.41{\pm}0.68^{\circ}C$ at C6 and C7, respectively; p<0.05). Significantly increased post-SGB temperatures (difference > $1^{\circ}C$) were found in 5/30 (16.7%) and 24/30 (80%) cases for C6 and C7, respectively (p<0.05). There were no significant differences in side effects between SGB performed at C6 or C7 (p>0.05). Conclusion: The lateral paracarotid approach using out-of-plane needle insertion for ultrasound-guided SGB performed at C7 was feasible and more effective at elevating skin temperature in the upper extremity than SGB at C6.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.87-90
• /
• 2014

The effects of electric field frequency on the ac electrical treeing phenomena in an epoxy/reactive diluent/layered silicate (1.5 wt%) were carried out, in needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy base resin, by using our ac electric field apparatus. To measure the treeing propagation rate, constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500 and 1,000 Hz) was applied to the specimen, in needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. As the electric field frequency increased, the treeing propagation rate increased. At 500 Hz, the treeing propagation rate of the epoxy/PG/nanosilicate system was $0.41{\times}10^{-3}$ mm/min, which was 3.4 times slower than that of the epoxy/PG system. The electrical treeing morphology was dense bush type at 60 Hz; however, as the frequency increased, the bush type was changed to branch type, having few branches, with very slow propagation rate.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.297-303
• /
• 2018

Seismic behavior of Osmanli and Senyuva stone bridges was addressed in this study. A combination of FEM and DEM was employed for getting closer to the real behavior of the bridge. One of the unique features of this combinational method is simulation close to reality. Modal numerical analysis was also used to verify the modeling. At the end of earthquake, a part of two lateral walls of Osmanli bridge was broken. The growth of arch cracks also increased during the earthquake. A part of right-hand wall of Senyuva Bridge was destructed during the earthquake. The left-hand side of the bridge wall was damaged during the earthquake but was not destructed.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.575-587
• /
• 2015

This paper focuses on vibration analysis of functionally graded cylindrical shell submerged in an incompressible fluid. The equation is established considering axial and lateral hydrostatic pressure based on first order shear deformation theory of shell motion using the wave propagation approach and classic Fl$\ddot{u}$gge shell equations. To study accuracy of the present analysis, a comparison carried out with a known data and the finite element package ABAQUS. With this method the effects of shell parameters, m, n, h/R, L/R, different boundary conditions and different power-law exponent of material of functionally graded cylindrical shells, on the frequencies are investigated. The results obtained from the present approach show good agreement with published results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.43-45
• /
• 2000

Traditionally, load flows have been calculated using the Gauss-Seidel and Newton-Raphson Method. DistFlow Method which is proposed by Wu and Baran is superior to the other two methods because it does not require the admittance matrix calculation to optimize the distribution system. This paper introduces a new alternative algorithm to the DistFlow Method which is slow and complex to find solutions as the number of lateral and sublateral increases. The proposed load flow method can construct System Jacobian easily. We can minimize the off-diagonal elements of the branch Jacobian and submatrices in the System Jacobian. Simulation results show that progressive performances of the proposed algorithm.

• 한국식물병리학회지
• /
• 제11권2호
• /
• pp.101-106
• /
• 1995

Deep blue fluorescence of resorcin blue-stained callose was observed only in the potato leafroll virus (PLRV)-infected potato plants, but not in other potato viruses investigated. The plant sections stained with aniline blue showed non-specific fluorescence regardless of PLRV infection, which means that aniline blue is not suitable for the staining of callose induces by PLRV infection. The fluorescence of resorcin blue-stained callose was more easily detectable than autofluorescence by a direct fluorescence detection method because of its deep blue color. The lateral branch of lower leaves was turned out to be the best material for fluorescence observation of all plant parts tested. In comparison of diagnostic efficacy of this technique to enzyme-linked immunosorbent assay (ELISA), PLRV infected potato plants showed corresponding increment of the fluorescence of resorcin blue stained callose as absorption values in ELISA increased. In the future, the criteria measuring the fluorescence objectively are thought to be determined for the practical application to the diagnosis of potato leafroll disease.

• Animal cells and systems
• /
• 제8권1호
• /
• pp.19-25
• /
• 2004

The decapodid stage of Lebbeus comanthi Hayashi and Okuno and the first zoea of Thor amboinensis (De Man) are described based on laboratory-hatched eggs from females collected from Japan. The decapodid stage of L. comanthi is readily distinguished from that of L. groenlandicus by the carapace without anteroventral denticle and tooth behind rostrum, the absence of the antennal spine, the four-segmented outer flagellum of the antennule, the absence of the palp of the mandible, and the telson with posterior margin con caved medially and without dorsolateral spine. The carapace with anteroventral denticle and the third abdominal somite distinctly curved in lateral view distinguish the first zoea of T. amboinensis from that of T. dobkini Chace and T. floridanus Kingsley. Larval characters of the genus Thor are summarized.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.365-368
• /
• 2000

Traditionally, load flows have been calculated using the Gauss-Seidel and Newton-Raphson Method. DistFlow Method which is proposed by Wu and Baran is superior to the other two methods because it does not require the admittance matrix calculation to optimize the distribution system. This paper introduces a new alternative algorithm to the DistFlow Method which is slow and complex to find solutions as the number of lateral and sublateral increases. The proposed load flow method can construct System Jacobian easily. We can minimize the off-diagonal elements of the branch Jacobian and submatrices in the System Jacobian. Simulation results show that progressive performances of the proposed algorithm have a better convergence time.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.227-241
• /
• 2020

An experimental study has been carried out to investigate the effect of beam to column connection rigidity on the behavior of infilled steel frames. Five half scale, single-story and single-bay specimens, including four infilled frames, as well as, one bare frame, were tested under in-plane lateral cyclic reversal loading. The connections of beam to column for bare frame as well as two infill specimens were rigid, whereas those of others were pinned. For each frame type, two different infill panels were considered: (1) masonry infill, (2) masonry infill strengthened with shotcrete. The experimental results show that the infilled frames with pinned connections have less stiffness, strength and potential of energy dissipation compared to those with rigid connections. Furthermore, the validity of analytical methods proposed in the literature was examined by comparing the experimental data with analytical ones. It is shown that the analytical methods overestimate the stiffness of infilled frame with pinned connections; however, the strength estimation of both infilled frames with rigid and pinned connections is acceptable.