• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.30-36
• /
• 2004

The development of LD(Laser Diode) tester and its control system based on the graphical programming language(LabVIEW) is addressed. The ill tester is used to check the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the Detector(optic fiber and photo diode) are very small, therefore the test device needs high accuracy. But each motion part of the test device could not accomplish high accuracy due to the limit of the mechanical performance. So, an image processing with machine vision is proposed to compensate for the error. By adopting our method we can reduce the error of position within $\pm$5$\mu\textrm{m}$.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.146-151
• /
• 2000

The importance of shape reconstruction is increasing in many areas such as RPD(Rapid Product Development) and reverse engineering. Typical data in these areas are mainly classified as the shape data measured by a laser scanner and the data extracted from the CT image. The goal of this research is to realize three-dimensional shape construction by showing a possible way to analyze input image data and reconstruct the original shape. Two main steps of the reconstructing process are obtaining cross-section data from image processing and linking loops between one slice and the next. Objects reconstructed in this way are compared with other objects using a laser scanner and modelled by commercially available software. The technique is expected to be used in reverse engineering applications and the object modeling with automated process.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.60-65
• /
• 1997

This paper proposes a profilometry system for precise surface contouring of 3D objects using a direc- tionally magnified image of a laser light stripe. The resolution of this system can be improved several times comparad with that of conventional systems without loss of spatial resolution and depth of measurement. A pair of cylindrical lens(a convex lens and a concave lens) are used for a directionally magnified image of a laser light stripe maintaining the same focal plane. Also, image processing procedures for image reconstruc- tions are described.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1425-1432
• /
• 2010

In large construction site, although soil conversion factor is so significant to preliminary design, operation design and calculating the cost of construction that it is important to take reasonable estimation and application, the standard of soil conversion factor for weathered ground doesn't clearly suggested yet. So in this study, at first we obtain the image using DSLR - high resolution camera and Laser scanner in the Haeng-Bok city constructin site, then analysis the ratio of soil and rock using various image processing method(Sobel method, Laplace method, Highpass filter, Hue and Saturation analysis). Mutual comparation with the result of image processing analysis and manual segmentation of 5case image in the cad. As a result, best image processing method was different for each case. In case of high propotion of rock, Laplace was best and in case of high propotion of soil, Highpass was best, and mixed case Laplace was best.

• KIISE Transactions on Computing Practices
• /
• v.21 no.3
• /
• pp.247-256
• /
• 2015

Since the Gulf War, air power has played a key role. However, the effect of high-tech weapons, such as laser-guided bombs and electronic optical equipment, drops significantly if they do not match the weather conditions. So, aircraft that are assigned to carry laser-guided bombs must replace these munitions during bad weather conditions. But, there are no objective criteria for when weapons should be replaced. Therefore, in this paper, we propose an algorithm to predict the hit rate of laser-guided bombs using cloud image processing. In order to verify the accuracy of the algorithm, we applied the weather conditions that may affect laser-guided bombs to simulated flight equipment and executed simulated weapon release, then collected and analyzed data. Cloud images appropriate to the weather conditions were developed, and applied to the algorithm. We confirmed that the algorithm can accurately predict the hit rate of laser-guided bombs in most weather conditions.

• Journal of the Korean Society of Visualization
• /
• v.3 no.1
• /
• pp.63-70
• /
• 2005

Optical Line Patternator(OLP) has been applied to get a distribution of the spray at high ambient pressure. OLP is a combined technique of extinction measurement and image processing. The attenuated intensity of laser beam after traversing spray region was measured by using a photo-detector, and the line image of Mie-scattering was captured simultaneously in the path of each laser beam by using a CCD camera. The distribution of extinction coefficient in the spray is obtained by processing these data with the algebraic reconstruction technique. From the distribution of extinction coefficient, the surface distribution of spray can be reconstructed. OLP does not use laser sheet but use laser beam so that the noise effect of multiple scattering, caused by increasing number density of droplet in high pressure environment, is reduced drastically. OLP is expected as a suitable method which can investigate the characteristics of relatively large spray under the high pressure environment such as liquid rocket engine.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.1
• /
• pp.25-29
• /
• 2013

Recently ARM processor's processing power has been increasing rapidly as it has been applied to consumer electronics products. Because of its computing power and low power consumption, it is used to various embedded systems.( including vision processing systems.) Embedded linux that provides well-made platform and GUI is also a powerful tool for ARM based embedded systems. So short period to develop is one of major advantages to the ARM based embedded system. However, for real-time date processing applications such as an image processing system, ARM needs additional equipments such as FPGA that is suitable to parallel processing applications. In this paper, we developed an embedded system using ARM processor and FPGA. FPGA takes time consuming image preprocessing and numerical algorithms needs floating point arithmetic and user interface are implemented using the ARM processor. Overall processing speed of the system is 60 frames/sec of VGA images.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.155-158
• /
• 2000

In this paper, we propose a Windows-based presentation system using laser pointer mouse. Major-characteristics of this system is to synchronize the laser pointing position with the PC cursor such that the laser can function as not only pointer, but also a PC mouse. It is shown that we use a special pattern to coincide the coordinate of the camera capture image with that of the pc window. We finally show its feasibility by some experiments with the implemented system.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.