• International Journal of High-Rise Buildings
• /
• v.12 no.3
• /
• pp.263-272
• /
• 2023

Role of architecture should not be limited to function of providing an inhabitable space but also include urban and social role of its impact to the public and surrounding area. Role of landmark building should be further expanded beyond and landmark building speaks out its aesthetics with mass form and/or with its appearance of façade. With study of this project, idea of landmark building is shifted from vertical extrusion of the land to horizontal extrusion of large space from the face of building. It is a double extrusion creating large assembly space up in the air linking surrounding masses.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.24-25
• /
• 2002

밀레니움을 전후하여 세계적으로 8m급 초대형 망원경들이 만들어지고 있다. ESO (European Southern Observatory)의 VLT (Very Large Telescopes) 4기, 미국 영국 카나다 등의 연합 Gemini telescope 2기, 일본의 Subaru 1기 등, 10여기의 망원경들이 완성되었고, 차세대 망원경들이 50m급으로 디자인되고 있다. 우주망원경도 지름 2.4m인 허블 우주망원경(Nubble Space Telescope)의 뒤를 이어 6m급의 차세대 우주망원경 (Next Generation Space Telescope)이 개발되고 있어서 2010년경에 발사될 예정이다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.57-64
• /
• 2005

Large Eddy Simulation (LES) of turbulent premixed combustion flow is performed by using the dynamic subgrid scale model based on -equation describing the flame front propagation. After introducing the LES governing equations with dynamic subgrid scale (DSGS) model newly introduced into the -equation, the turbulent premixed combustion flow over backward facing step is analyzed to validate present formulation. The calculated results can predict the velocity and temperature of the combustion flow in good agreement with the experiment data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.3
• /
• pp.241-250
• /
• 2007

During enlarging an existing tunnel under operation, unexpected excessive overbreaks and large cavities around the tunnel were found. It was an issue that they might influence the stability the new tunnel. The overbreaks and cavities are assumed that they were attributed to excessive blasting under the condition of insufficient ground investigation. To enlarge the existing tunnel safely, therefore, a remedy measure for the overbreaks and cavities is suggested.

• Bulletin of the Korean Mathematical Society
• /
• v.43 no.3
• /
• pp.543-549
• /
• 2006

Sung et al. [13] obtained a WLLN (weak law of large numbers) for the array $\{X_{{ni},\;u_n{\leq}i{\leq}v_n,\;n{\leq}1\}$ of random variables under a Cesaro type condition, where $\{u_n{\geq}-{\infty},\;n{\geq}1\}$ and $\{v_n{\leq}+{\infty},\;n{\geq}1\}$ large two sequences of integers. In this paper, we extend the result of Sung et al. [13] to a martingale type p Banach space.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.12
• /
• pp.435-440
• /
• 1983

The methods of forming the bus impedance matrix, which is mainly employed in fault analysis of power system, can be generally classified in catagories, (1) the one being the inverse matrix of bus admittance matrix, and (2) the other the bus impedance matrix succesive formation method by particular algorithms. The former method is theouetically elegant, but the formation and inverse of complex bus admittance matrix for large power system requires too much amounts of computer memory space and computing time. The latter method also requires too much memory space. Therefore, in this paper, an algorithm and computer program is introduced for the formation of a sparse bus impedance matrix which generates only the matching terms of the admittance matrix. So, this method can reduce the computer memory and computing time, and can be applied to fault analysis of large power system by small digital computer.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.10 no.2
• /
• pp.1-7
• /
• 2011

An experimental study to evaluate structural capacity of an embedded plate connected with prestressed concrete beam was performed. Embedded steel plates and prestressed concrete beam were connected with stud-bolts at the ends of concrete beam specimens. About 1,000 kN concentrated load was applied at 450mm away from the end of beam specimen. A 3,000 kN capacity static Oil-jack was used to direct concentrated load. The maximum strain of stud-bolt recorded $90{\times}10^{-6}$(mm/mm) and wide width cracks were not founded. Any falling failures of concrete and large deformations were not founded either between steel plate and prestressed concrete specimen. As a result, construction performance can be improved using this embedded steel plate connection system apply to large space educational facilities.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.78.1-78.1
• /
• 2012

We present near-IR imaging polarimetry of the 5${\times}$9 fields (-39'${\times}$69') centered at 30 Doradus in the Large Magellanic Cloud (LMC), using the InfraRed Survey Facility (IRSF). We obtained polarimetry data in J, H, and Ks bands using the JHKs-simultaneous imaging polarimeter SIRPOL in 2008 December and 2011 December. We measured Stokes parameters of point-like sources to derive the degree of polarization and the polarization position angle. Since our results are suffered from non-photometric weather, we compare the polarization results from 2008 and those from 2011, and examine the photometric reliabilities between the two runs. Our survey data will be compared with molecular and dust maps to reveal the large-scale magnetic field properties in the star-forming clouds.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.1
• /
• pp.99-105
• /
• 2006

In this study, nonlinear static and dynamic aeroelastic analyses for a high-aspect-ratio wing have been performed. To achieve these aims, the transonic small disturbance (TSD) theory for the aerodynamic analysis and the large deflection beam theory considering a geometrical nonlinearity for the structural analysis are applied, respectively. For the coupling between fluid and structure, the transformation of a displacement from the structural mesh to the aerodynamic grid is performed by a shape function which is used for the finite element and the inverse transformation of force by work equivalent load method. To validate the current method, the present analysis results of a high-aspect-ratio wing are compared with the experimental results. Static deformations in the vertical and torsional directions caused by an angle of attack and gravity loading are compared with experimental results. Also, static and dynamic aeroelastic characteristics are investigated. The comparisons of the flutter speed and frequency between a linear and nonlinear analysis are presented.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2007

In this study, we fill a person's shoes human knowledge use a computer fast and simple repetition in architecture design. this study are launched from a assumption that a optimized arrangement spaces are able to measure and gauge. but automatic space arrangement program is first step, we have a value that propose a differential cell space and valuation space and process of optimized space arrangement. the merits of this design process are as follows; 1. this program has a advantage high the building-to-land ratio land and business area in space design. 2.this program can design a economy building and calculate rent benefit and calculate cost of construction. 3. this program can adapt for digital GIS. this program can down cost in labor productivity. 5. a layman can design high level. the weak point of this design process are as follows; 1. the design product is simple box shape. 2. this program has a weak in large area and complicated land shape 3. complex use space design are difficult in this program.