• 폴리머
• /
• 제35권4호
• /
• pp.284-288
• /
• 2011

초임계 유체에서 poly(L-Lactide) (PLLA)의 산업화 생산 공정 개발을 위한 예비 연구로 1-dodecano/stannous 2-ethyl-hexanoate(DoOH/Sn(Oct)$_2$)를 개시제로 하여 chlorodifluoromethane 초임계 용매 하에서 락티드의 개환 중합을 실시하였다. 중합은 3 L 반응기를 사용하였으며 중합시간, 온도, 압력 및 단량체와 초임계 용액 농도에 따른 중합거동을 관찰하였다. 중합시간이 5시간 경과할 경우 얻어진 중합체의 반응 수율 및 분자량은 각각 72%, 68000 g/mol이었다. 단량체의 농도가 증가할수록 중합체의 수율 및 분자량은 증가하였으며 최대 각각 97%, 144000 g/mol이 얻어졌다. 반응기의 압력이 130에서 240 bar로 증가할 경우 PLLA의 수율 및 분자량이 증가하였다. 얻어진 중합체의 열안정성을 향상시키기 위해 메탄올 처리 및 진공 처리를 실시하였다. 그 결과 두 가지 방법 모두 PLLA의 열안정성을 향상시켰다.

• 한국생활과학회지
• /
• 제2권1호
• /
• pp.17-24
• /
• 1993

Insulin (P)를 면역원으로 이용하여 insulin에 대한 균일한 항체집단의 대량유도 가능성 및 유도된 항체의 특성을 검토하였다. Insulin (P)에 의해 유도된 IgY는 insulin (M)에 의해 유도된 IgY 보다 조금 낮은 친화성을 나타내었으나 큰 차이는 없었다. 두 종류의 면역원에 의해 유도된 IgY는 대부분 insulin (M)을 인식하였으며, 같은 항원 특이성을 나타내었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.15-16
• /
• 2006

Since two-photon polymerization (TPP) emerged as a new technology over a decade ago, a large variety of micro-objects including 3-D micro-optical components, micromechanical devices, and 3-D photonic crystals have been fabricated using TPP with a high spatial resolution of approximately submicron scale to 100 nm. Recent efforts have been made to improve the fabrication efficiency and precision of micro-objects obtained with TPP; in particular, many studies have been carried out with the aim of developing efficient two-photon absorbing chromophores. In this presentation, we will discuss our efforts to develop highly efficient two-photon absorbing materials and also describe recent attempts to enhance the resolution and to improve the fabrication efficiency of nanofabrications based on TPP.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.30-34
• /
• 2014

We report a novel approach for fabricating active surface-enhanced Raman scattering (SERS) substrate for sensitive detection. This approach is based on the assembling of gold nanoparticles (AuNPs) onto the electrospun polycaprolactone (PCL) nanofiber film. The hydrophobic surface of PCL nanofiber film was pretreated using UV-inducing graft polymerization with acrylic acid. Afterwards this PCL nanofiber film was incubated with the AuNP solution to promote the assembly of AuNPs onto the PCL nanofibers and the formation of SERS active substrate. 4-aminothiophenol (4-ATP) molecule was used as a test probe for SERS experiments, indicating that the substrate has high sensitivity to SERS response. Our method has great advantage in term of environment-friendly synthesis, large-scale, high stability and good reproducibility. This highly active SERS substrate can be employed to detect the drug molecule, 2-thiouracil.

• 공업화학
• /
• 제31권3호
• /
• pp.267-276
• /
• 2020

Oxirane계 단량체의 양이온 개환 공중합반응으로 합성되는 ECH (ephichorohydrin) 기반 copolyol (PECH copolyol)류의 특성에 대한 반응온도, 용매의 종류 및 개시제에 대한 영향을 연구하였다. 공단량체로는 butylene oxide와 hexylene oxide 두 종류의 알킬렌 옥사이드를 사용하였으며, 중합 조건은 methylene chloride (MC) 용매에서 개시제로 diethylene glycol (DEG)를 사용한 조건과 toluene을 용매에서 tripropylene glycol (TPG)를 개시제로 사용한 두 조건으로 진행하였다. 개환 공중합반응에서 active monomer (AM) mechanism 유도를 위해 단량체는 실린지 펌프를 사용해 IMA (increased monomer addition) 방법으로 주입하였고 중합온도는 -5 ℃에서 실행하였다. 합성된 ephichorohydrin (ECH) 기반 copolyol인 PECH copolyol은 치환반응으로 ECH unit를 아지드화하여 glycidyl azide계 에너지 함유 copolyol (GAP copolyol)로 전환하였다. 합성된 아지드화 코폴리올은 용매와 개시제의 변화에 대한 영향은 크지 않았으며, 분자량은 아지드화 반응 후 평균 500 증가함으로써 GAP 코폴리올이 설계한 대로 중합되었음을 확인하였다. DSC 분석으로 copolyol류의 조성비 변화에 따른 유리전이 온도(glass transition temperature, T_g)의 변화를 측정하였을 때, 공단량체의 함량이 증가할수록 알킬 사슬의 길이에 의한 영향으로 T_g와 점도가 모두 감소하는 경향을 보였다. 아지드화 반응과정에서 생성되는 CH₃N₃의 생성을 원천적으로 방지할 수 있으며, 대규모 공정이 가능할 것으로 기대된다.

• International Journal of Oral Biology
• /
• 제37권4호
• /
• pp.181-188
• /
• 2012

As the demand for large-scale analysis of gene expression using DNA arrays increases, the importance of the surface characterization of DNA arrays has emerged. We compared the efficiency of molecular biological applications on solid-phases with different surface polarities to identify the most optimal conditions. We employed thiol-gold reactions for DNA immobilization on solid surfaces. The surface polarity was controlled by creating a self-assembled monolayer (SAM) of mercaptohexanol or hepthanethiol, which create hydrophilic or hydrophobic surface properties, respectively. A hydrophilic environment was found to be much more favorable to solid-phase molecular biological manipulations. A SAM of mercaptoethanol had the highest affinity to DNA molecules in our experimetns and it showed greater efficiency in terms of DNA hybridization and polymerization. The optimal DNA concentration for immobilization was found to be 0.5 ${\mu}M$. The optimal reaction time for both thiolated DNA and matrix molecules was 10 min and for the polymerase reaction time was 150 min. Under these optimized conditions, molecular biology techniques including DNA hybridization, ligation, polymerization, PCR and multiplex PCR were shown to be feasible in solid-state conditions. We demonstrated from our present analysis the importance of surface polarity in solid-phase molecular biological applications. A hydrophilic SAM generated a far more favorable environment than hydrophobic SAM for solid-state molecular techniques. Our findings suggest that the conditions and methods identified here could be used for DNA-DNA hybridization applications such as DNA chips and for the further development of solid-phase genetic engineering applications that involve DNA-enzyme interactions.

• 전기화학회지
• /
• 제7권2호
• /
• pp.100-107
• /
• 2004

다공성 멤브레인 필터를 템플레이트로 이용하여 전도성 고분자를 중합하면 템플레이트의 형태대로 나노 또는 마이크로 사이즈의 전도성 고분자 구조물을 얻을 수 있다. 본 연구에서는 전기화학 중합법을 템플레이트 합성 과정에 이용하여 전극에 고착된 전도성 고분자 미세 구조물을 얻었다. 이 전기화학 템플레이트 합성 방법에서의 관건은 플라스틱 템플레이트를 ITO 또는 금속 전극위에 부착시키는 일이다, 이 때 전극은 전기화학 특성을 보지하여야 한다 이를 위하여 PEDiTT(poly-3,4-ethylenedithiathiophene) 용액과 PVA (polyvinyl alcohol) 용액을 블랜딩히여 얻은 복합체(composite)를 접착제로 이용하여 다공성 멤브레인 필터를 전극에 부착시켜 템플레이트 전극을 제작하였다. 이 전극을 피롤농도가 0.5M인 중합용액에 넣은 후 전해반응으로 템플레이트의 기공 안으로 폴리피롤이 합성되도록 하였다. 폴리피를 형성여부를 확인하기 위하여 템플레이트의 제거 전과 후의 전극 모습을 SEM이미지로 얻어서 확인하였다 또한 순환전압전류댑으로 전류 곡선을 얻어 확인하였다. 비교적 면적이 큰 작업 전극과 매우 작은 미소전극을 상대전극으로 구성한 전해 중합계를 이용하여 큰 작업 전극의 국소 부분에만 전도성 고분자의 전해중합을 시도하였다. 이를 위하여 마이크로 크기의 전극을 상대전극(Counter Electrode)으로, 그리고 템플레이트가 부착된 전극을 작업 전극(Working Electrode)으로 하는 2전극계를 구성하여 이용하였다. 이 전해계를 이용하여 얻은 미세구조물은 템플레이트의 동공 크기와 같은 크기로 성장하였고 형태는 튜브나 막대기 형태를 보였다. 특히 상대전극의 위치를 조정하여 원하는 위치에 튜브형태의 미세구조물을 합성하였다. 최종 합성조건으로는 $250{\mu}m$ 전극은 인가전위 4V로 100초간 중합시간, 그리고 $10{\mu}m$전극의 경우는 인가 전위 6V에 시간은 30초 동안 중합할 때 고분자가 멤브레인 동공 밖으로 넘쳐나지 않는 만큼 성장함을 알았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2013

Striving to replace the well known silicon nanocrystals embedded in oxides with solution-processable charge-trapping materials has been debated because of large scale and cost effective demands. Herein, a silicon quantum dot-polystyrene nanocomposite (SiQD-PS NC) was synthesized by postfunctionalization of hydrogen-terminated silicon quantum dots (H-SiQDs) with styrene using a thermally induced surface-initiated polymerization approach. The NC contains two miscible components: PS and SiQD@PS, which respectively are polystyrene and polystyrene chains-capped SiQDs. Spin-coated films of the nanocomposite on various substrate were thermally annealed at different temperatures and subsequently used to construct metal-insulator-semiconductor (MIS) devices and thin film field effect transistors (TFTs) having a structure p-$S^{++}$/$SiO_2$/NC/pentacene/Au source-drain. C-V curves obtained from the MIS devices exhibit a well-defined counterclockwise hysteresis with negative fat band shifts, which was stable over a wide range of curing temperature ($50{\sim}250^{\circ}C$. The positive charge trapping capability of the NC originates from the spherical potential well structure of the SiQD@PS component while the strong chemical bonding between SiQDs and polystyrene chains accounts for the thermal stability of the charge trapping property. The transfer curve of the transistor was controllably shifted to the negative direction by chaining applied gate voltage. Thereby, this newly synthesized and solution processable SiQD-PS nanocomposite is applicable as charge trapping materials for TFT based memory devices.

• 한국수정란이식학회지
• /
• 제10권1호
• /
• pp.73-82
• /
• 1995

large scale production of cloned embryos requires the technology of multiple generation nuclear transplantation(NT) using NT embryos as the subsequent donor nuclei. The purposes of this study were producing the second generation cloned rabbit embryos, and also to determine the electrofusion rate and in vitro developmental potential comparatively in the cloned embryos of the first and second NT generation. The embryos of 16-cell stage were collected from the mated does by flushing oviducts with Dulbecco's phosphate buffered saline(D-PBS) containing 10% fetal calf serum(FCS) at 47 hours after hCG injection In the first generation NT, the nuclear donor embryos were synchronized in the phase of Gi /S transition of 32-cell stage. The first generation NT embryos which were developed to 8-cell were synchronized in Gi /S transition phase of the following 16-cell stage and used as donor nuclei for second generation Synchronization of the cell cycle of blastomeres was induced, first, using an inhibitor of microtuble polymerization, colcemid for 10 hours to arrest blastomeres in M phase, and secondly, using a DNA synthesis inhibitor, aphidicolin for 1.5 to 2 hours to arrest them in Gi /S transition boundary. The recipient cytoplasms were obtained by removing the nucleus and the first polar body from the oocytes collected at 14 hours after hCG injection. The separated donor blastomeres were injected into the enucleated recipient oocytes by micromanipulation and were electrofused by electrical stimulation of three pulses for 60 $\mu$sec at 1.25 kV /cm in 0.28 M rnannitol solution The fused oocytes were co-cultured with a monolayer of rabbit oviductal epithelial cells in M-199 solution containing 10% FCS for 120 hours at 39$^{\circ}C$ in a 5% $CO_2$ incubator. Following in vitro culture of the first and second generation cloned embryos to blastocyst stage, they were stained with Hoechst 33342 dye for counting the number of blastomeres by fluorescence microscopy. The results obtained were summarized as follows: 1. The electrofusion rate was found to be similar as 79.4 and 91.5% in the first and second generation NT rabbit embryos, respectively. 2. The in vitro developmental potential to blastocyst stage of the second generation NT embryos (23.3%) was found significantly(p<0.05) lower, compared with that of the first generation NT embryos (56.8%). 3. The mean blastomeres counts of embryos developed to blastosyst stage following in vitro culture for 120 hours and also their daily cell cycles during the culture period were decreased significantly (p<0.05) to 104.3 cells and 1.33 cylces in the second NT generation, compoared with 210.4 cells and 1.54 cycles in the first NT generation, respectively.