• 대한건축학회연합논문집
• /
• 제21권6호
• /
• pp.65-71
• /
• 2019

In Korea, there is a lack of adequate safety management for small-scale construction work, particularly when compared to large-scale construction projects. The number of construction disasters is also higher on small-scale construction sites. In this regard, this study aimed to develop the application prototype to support the safety management of small-scale construction projects. The major findings of the research are as follows. 1) About 60% of construction disasters and death occurred on small-scale construction sites over the last two years. In addition, institutional support and costs for safety management were found to be insufficient. 2) The items of the application for the small-scale construction safety management were constructed on the basis of the safety management of large-scale construction work. The contents of the application were confirmed based on a survey of small-scale construction project managers. 3) The application algorithm was developed with a focus on the roles of management subjects and information exchange. For transition from the application prototype presented in this study to a commercial product, further research needs to be conducted regarding the reflection of user requirements and application management subjects.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.177-188
• /
• 1997

This study describes the important information for establishing Human Computer Interface System for solving the large scale Traveling Saleman Problem in Printed Circuit Board production. Appropriate types and sizes of partitioning of large scale problems are discussed. Optimal tours for the special patterns appeared in PCB's are given. The comparision of optimal solutions of non-Euclidean problems and Euclidean problems shows the possibilities of using human interface in solving the Chebyshev TSP. Algorithm for the large scale problem using described information and coputational result of the practical problem are given.

• Journal of Astronomy and Space Sciences
• /
• 제4권2호
• /
• pp.95-99
• /
• 1987

The possibility of the cross-field diffusion of a fluid to generate magnetic fields on a large scale is examined. Application to the sunspot is discussed.

• 한국정보통신학회논문지
• /
• 제24권7호
• /
• pp.904-913
• /
• 2020

데이터 볼륨과 복잡도가 빠르게 증가함에 따라 과학 빅데이터를 다루는 데이터 집적 과학은 네트워크를 통해 보다 효과적인 데이터 저장 및 분배를 위한 새로운 기술을 발견하는 것을 필요로 한다. 최근 네임드 데이터 네트워킹 커뮤니티와 데이터 집적 과학 커뮤니티는 함께 과학 실험 빅데이터의 분배 및 관리에 있어서 혁신적인 변화를 꾀하였다. 본 논문 에서는 기후과학 및 고에너지물리 데이터 등과 같은 과학 빅데이터를 위한 현존하는 엔디엔 테스트베드들에 대한 분석이 처음으로 이루어진다. 과학 빅데이터를 위한 엔디엔 테스트베드들을 현황, 엔디엔 기반 응용, 특징 측면에서 묘사하고 토의한다. 마지막으로 과학 빅데이터를 위한 엔디엔 테스트베드 네트워크를 확립함에 있어서, 함정에 빠질 수 있는 다양한 이슈들을 엔디엔 테스트베드들에 대한 묘사 그리고 특징들로 부터 도출하여, 분석 제시한다.

• Asia pacific journal of information systems
• /
• 제25권3호
• /
• pp.548-562
• /
• 2015

The growing popularity of mobile application has led to researchers and practitioners needing to understand users' mobile application download behaviors. Using large-scale transaction data obtained from a leading Korean telecommunications company, we empirically explore how application download rank, which appears to users when they decide to download a new application, affects their extended mobile application download. This terminology refers to downloading an additional application in the same category as those that they have already downloaded. We also consider IT characteristics, user characteristics, and application type that might be associated with the extended application download. The analysis generates the following result. Overall, a higher rank of a new application encourages the extended application download, but the linear relationship between the rank and the extended application download disappears when critical rank points are incorporated into the model. Further, no quadratic effect of rank is found in the extended application download. Based on the results, we suggest theoretical and managerial implications.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.294-304
• /
• 2014

This paper presents a real-time rendering algorithm of large-scale geometric data using GLSL (OpenGL shading language). It details the VAO (vertex array object) and VBO(vertex buffer object) to be used for up-loading the large-scale point clouds and polygon meshes to a graphic video memory, and describes the shader program composed by a vertex shader and a fragment shader, which manipulates those large-scale data to be rendered by GPU. In addition, we explain the global rendering procedure that creates and runs the shader program with the VAO and VBO. Finally, a rendering performance will be measured with application examples, from which it will be demonstrated that the proposed algorithm enables a real-time rendering of large amount of geometric data, almost impossible to carry out by previous techniques.

• 한국물환경학회지
• /
• 제24권1호
• /
• pp.129-134
• /
• 2008

Ultrasonic cavitational energy distributions were measured in a large-scale sonoreator. In application of 110 and 170 kHz of ultrasound, the cavitational energy was just detected near the transducer module. However 35 and 72 kHz ultrasound made good distributions from the module to the end of the sonoreactor, Especially, 72 kHz ultrasound application showed most stable and highest cavitational energy value through the whole length. In the comparison between input power and cavitational energy, linear relationships were obtained in 35 and 72 kHz and it was anticipated that these results would be used for the optimization of input power for the design of sonoreactors. And three dimensional energy distribution was depicted through the mapping of cavitaional energy. Average energy in the large-scale sonoreactor was estimated as 62.8 W, which was about 40 % of input power.

• KSBB Journal
• /
• 제16권1호
• /
• pp.11-14
• /
• 2001

Techniques for protein refolding from inclusion body are discussed in view of its engineering application to large scale protein purification. Among the techniques, dilution and dialysis are mainly utilized due to simple operation. Membrane reactor, gel filtration chromatography, and continuous tank operation are emerging tools for their process-scale possibility in refolding. Reaction engineering approaches could be used to analyze the kinetic behaviour in the process scale refolding reactor. The kinetic analysis is helpful in the optimization of refolding yield in the refolding reactor.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.163-173
• /
• 1997

This article presents an application of a large-scale structural mixing model (Broadwell et al. 1984) to the blowout of turbulent reacting jets discharging perpendicularly into an unconfined cross air-flow. In an analysis of a common stability curve, a plausible explanation can be made that the phenomenon of blowout is related only to the mixing time scale of the two flows. The most notable observation is that the blowout distance is traced at fixed positions at all times according to the velocity ratio R. Measurements of the lower blowout limits in the liftable flame agree qualitatively with the blowout parameter ${\varepsilon}$, proposed by Broadwell et al. Good agreement between the results calculated by a modified blowout parameter ${\varepsilon}^'$ and experimental results confirms the important effect of a large-scale structure in specifying the stabilization feature of blowouts.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.585-588
• /
• 1997

This paper presents a construction method of logic-based switching control system which operates in widely changing environments. The logic-based switching controller is composed of a family of candidate controllers together with a supervisor. The system does not require any identification schemes of environments. Switching from one candidate controller to another is carried out based on monitoring the output of the system. The basic ideas of adaptation are as follows: (1)each candidate controller is prepared for each environment in advance; (2)the supervisor applies a sequence of speculative controls to a plant with candidate controllers just after the control has started and just after the change of the environment has been detected. It is important that each candidate controller can keep the system stable during a sequence of speculative controls, and the most appropriate candidate controller for the environment to which the system is exposed can be selected before the last speculative control is ended. An application to an antiskid braking system clarifies the effectiveness of the proposed method.