• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2347-2349
• /
• 2004

The iron loss in electric machines takes large part of machine losses and the reduction of iron loss brings the increase of the efficiency. In the rotating machines, however it is very difficult to calculate result because the measuring processes are very complex and laborious. As is well known, the relation between the flux density B and the magnetic field intensity H relation is not linear. For the iron loss, B and H must be measured and usually B becomes the reference wave(sine wave) and the following H is measured using H-coil. To make the B as sine wave, B is controlled by some devices. The error is controlled to become zero by the proposed algorithm which uses the bisection algorithm. The experiments are compared with the simulation results, and they show acceptable agreements.

• Wind and Structures
• /
• 제27권2호
• /
• pp.111-121
• /
• 2018

Experiments were conducted in a large-scale Ward-type tornado simulator to study tornado-like vortices. Both flow velocities and the pressures at the surface beneath the vortices were measured. An interpretation of these measurements enabled an assessment of the mean flow field as well as the mean and fluctuating characteristics of the surface pressure deficit, which is a manifestation of the flow fluctuation aloft. An emphasis was placed on the effect of the aspect ratio of the tornado simulator on the characteristics of the simulated flow and the corresponding surface pressure deficit, especially the evolution of these characteristics due to the transition of the flow from a single-celled vortex to a two-celled vortex with increasing swirl ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1851-1856
• /
• 2008

A numerical program based on computational fluid dynamics has been developed to simulate characteristics of an EHD induction micropump. The ambiguity of boundary conditions was removed by adopting an equation formulated for electric potential as the dependent variable. The calculations show that the dependency of frequency agrees well with the experiments and the previous analysis. The instability, caused by backflows, is getting stronger as the channel depth increases, which is consistent with experiments. The present study reveals that it is due to the limit in the penetration depth which the electric field can affect. Despite the disadvantage of large channel depth, there is a certain optimal depth for the maximum flow rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.49-51
• /
• 2004

The iron loss in electric machines takes large part of machine losses and the reduction of iron loss brings the increase of the efficiency. In the rotating machines, however it is very difficult to calculate the iron loss and to get the exact experiment result because the measuring precesses are very complex and laborious. As is well known, the relation between the flux density B and the magnetic field intensity H relation is not linear. For the iron loss, B and H must be measured and usually B becomes the reference wave(sine wave) and the following H is measured using H-coil. To make the B as sine wave, B is controlled by some devices. The error is controlled to become zero by the proposed algorithm which uses the bisection algorithm. The experiments are compared with the simulation results, and they show acceptable agreements.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.110-114
• /
• 2003

When using the dipping method for crystal formation, mono-layered colloidal crystal structures depend upon the lift-up rate of a glass substrate. The mono-layered colloidal crystals showed the highest quality when the glass substrate was raised at a rate of 3 mm/min at 25 $^{\circ}C$ in a 1 wt% polystyrene colloidal suspension (ethanol medium). In addition, in order to obtain multiple-layered colloidal crystals, an external electric Held was introduced. Multiple-layered colloidal crystals were successfully obtained via this method. The colloidal particles were well ordered over large areas and assembled into a homogeneous structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.727-730
• /
• 2005

Cellulose based Electro-Active Papers (EAPap) is very promising material due to its merits in terms of large bending deformation, low actuation voltage, ultra-lightweight, and biodegradability. These advantages make it possible to utilize applications, such as artificial muscles and achieving flapping wings, micro-insect robots and smart wall papers. This paper investigates the in-plane strains of EAPap under electric fields, which are useful for a contractile actuator application The preparation of EAPap samples and the in-plane strain measurement system are explained, and the test results are shown in terms of electric field, frequency and the oriental ions of the samples. The power consumption and the strain energy of EAPap samples are discussed. Although there are still unknown facts in EAPap material, this in-plane strain may be useful for artificial muscle applications.

• 센서학회지
• /
• 제32권3호
• /
• pp.180-186
• /
• 2023

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.

• 한국토양비료학회지
• /
• 제38권2호
• /
• pp.78-84
• /
• 2005

국내에서 자가 채종되는 양파종자의 품종, 종자의 함수량 및 종자크기가 발아율에 미치는 영향과 gibberellin, $KNO_3$ 및 $NaNO_3$ 등의 화학약품, 및 전기장과 자기장 처리가 발아율과 초기생육에 미치는 영향을 조사하였다. 종자의 품종에 따른 발아율의 변화는 거의 없었으나, 채종 후 저장 또는 건조정도에 따라 큰 차이를 나타내었다. 종자의 함수량이 10-15% 범위에서 발아율이 가장 높았으며, 대립종자보다는 중립과 소림종자의 발아율이 높게 나타났다. 화학약품을 처리한 종자의 발아율 GA < $NaNO_3$ < $KNO_3$ 순으로 높게 나타났다. $KNO_3$ 0.1%와 0.2% 처리로 최종발아율이 10-12% 증가하였으며, nitrate가 양파종자의 발아촉진 및 발아율 향상에 효과적인 것으로 나타났다. 전기장 또는 자기장 처리에 의해 양파종자의 발아율이 향상되었으며, 전기장 10 kV와 자기장 4 Gauss 처리시 각각 86%와 88%로 무처리구에 비해 10-12% 높았다. 또한 전기장과 자기장 처리로 양파종자의 초기생육은 향상되었으며, 파종 40일 후의 초장 및 생체중량이 무처리구에 비해 23-45% 증가되었다.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.628-633
• /
• 2011

Studies on lead-free piezoelectrics have been attractive as means of meeting environmental requirements. We synthesized lead-free piezoelectric $(Bi_{1/2}Na_{1/2})TiO_3-Ba(Cu_{1/3}Nb_{2/3})O_3$ (BNT-BCN) ceramics, and their dielectric, piezoelectric, and strain behavior were characterized. As BCN with a tetragonal phase was incorporated into the rhombohedral BNT lattice, the lattice constant increased. A small amount of BCN increased the density and dielectric constant forming the complete solid solution with BNT. However, BCN above 10 mol% was precipitated into a separate phase, and which was detected with XRD. In addition, EDX measurement revealed that Cu in BCN was not distributed homogeneously but was accumulated in a certain area. A lower density with a large amount of BCN was attributed to the nonsinterable property of BCN with large tetragonaliy. The dielectric constant vs the temperature change and the strain vs the electric field indicated that the ferroelectric property of BNT was diminished and paraelectric behavior was enhanced with the BCN addition. BNT-7.5BCN showed a 0.11% unimorph strain with a 9.0 kV/mm electric field with little hysteresis.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.298-303
• /
• 2011

A capsular endoscope (CE) for inspection of the large intestine requires a motor for backward navigation against the autonomous travel in the intestine. This study proposes an HF power system for generating a magnetic field and for delivering wireless power to the internal or implanted medical devices. The magnetic field is generated by a wound coil (L) around a wooden frame, and the current is driven to the coil through a resonating capacitor (C). The characteristics of the resonance frequency shifting of the L-C series circuit are analyzed. A stable magnetic field intensity in the field coil is maintained by a specially designed frequency tracking system that automatically follows the L-C resonance frequency. Testing confirmed that the oscillation system tracks well the parameter changes of the electric components caused by the operating conditions or environmental variations.