• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2347-2349
• /
• 2004

The iron loss in electric machines takes large part of machine losses and the reduction of iron loss brings the increase of the efficiency. In the rotating machines, however it is very difficult to calculate result because the measuring processes are very complex and laborious. As is well known, the relation between the flux density B and the magnetic field intensity H relation is not linear. For the iron loss, B and H must be measured and usually B becomes the reference wave(sine wave) and the following H is measured using H-coil. To make the B as sine wave, B is controlled by some devices. The error is controlled to become zero by the proposed algorithm which uses the bisection algorithm. The experiments are compared with the simulation results, and they show acceptable agreements.

• Wind and Structures
• /
• v.27 no.2
• /
• pp.111-121
• /
• 2018

Experiments were conducted in a large-scale Ward-type tornado simulator to study tornado-like vortices. Both flow velocities and the pressures at the surface beneath the vortices were measured. An interpretation of these measurements enabled an assessment of the mean flow field as well as the mean and fluctuating characteristics of the surface pressure deficit, which is a manifestation of the flow fluctuation aloft. An emphasis was placed on the effect of the aspect ratio of the tornado simulator on the characteristics of the simulated flow and the corresponding surface pressure deficit, especially the evolution of these characteristics due to the transition of the flow from a single-celled vortex to a two-celled vortex with increasing swirl ratio.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1851-1856
• /
• 2008

A numerical program based on computational fluid dynamics has been developed to simulate characteristics of an EHD induction micropump. The ambiguity of boundary conditions was removed by adopting an equation formulated for electric potential as the dependent variable. The calculations show that the dependency of frequency agrees well with the experiments and the previous analysis. The instability, caused by backflows, is getting stronger as the channel depth increases, which is consistent with experiments. The present study reveals that it is due to the limit in the penetration depth which the electric field can affect. Despite the disadvantage of large channel depth, there is a certain optimal depth for the maximum flow rate.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.49-51
• /
• 2004

The iron loss in electric machines takes large part of machine losses and the reduction of iron loss brings the increase of the efficiency. In the rotating machines, however it is very difficult to calculate the iron loss and to get the exact experiment result because the measuring precesses are very complex and laborious. As is well known, the relation between the flux density B and the magnetic field intensity H relation is not linear. For the iron loss, B and H must be measured and usually B becomes the reference wave(sine wave) and the following H is measured using H-coil. To make the B as sine wave, B is controlled by some devices. The error is controlled to become zero by the proposed algorithm which uses the bisection algorithm. The experiments are compared with the simulation results, and they show acceptable agreements.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.110-114
• /
• 2003

When using the dipping method for crystal formation, mono-layered colloidal crystal structures depend upon the lift-up rate of a glass substrate. The mono-layered colloidal crystals showed the highest quality when the glass substrate was raised at a rate of 3 mm/min at 25 $^{\circ}C$ in a 1 wt% polystyrene colloidal suspension (ethanol medium). In addition, in order to obtain multiple-layered colloidal crystals, an external electric Held was introduced. Multiple-layered colloidal crystals were successfully obtained via this method. The colloidal particles were well ordered over large areas and assembled into a homogeneous structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.727-730
• /
• 2005

Cellulose based Electro-Active Papers (EAPap) is very promising material due to its merits in terms of large bending deformation, low actuation voltage, ultra-lightweight, and biodegradability. These advantages make it possible to utilize applications, such as artificial muscles and achieving flapping wings, micro-insect robots and smart wall papers. This paper investigates the in-plane strains of EAPap under electric fields, which are useful for a contractile actuator application The preparation of EAPap samples and the in-plane strain measurement system are explained, and the test results are shown in terms of electric field, frequency and the oriental ions of the samples. The power consumption and the strain energy of EAPap samples are discussed. Although there are still unknown facts in EAPap material, this in-plane strain may be useful for artificial muscle applications.

• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.180-186
• /
• 2023

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.78-84
• /
• 2005

This study was conducted to investigate the effects of chemical treatments and electric and magnetic field treatments on germination and seedling growth of onion (Allium cepa L.). Germination ratios of the onion seed were not much different among the tested species. However, germination ratio was much higher in species of small and medium size seed than that of large one. Moisture content of the seeds was shown to be more suitable in the range of 10-15% for seed germination compare to that of 20%. The germination ratio of onion seeds was found to be increased by the chemical treatments in the order of GA<$NaNO_3$<$KNO_3$. In particular, the treatments with 0.1 and 0.2% $KNO_3$ increased the germination ratio by 13 and 15% compared to that of the non-treatment. The seeds treated with electric or magnetic field resulted in much higher germination ratio and better initial growth. Germination ratios of 86 and 88% were found in the 10 kV and 4 Gauss treatments, respectively. The length and weight of the seedlings grown for 40 days after transplanting were increased by 23-45% with 8 kV and 12 Gauss treatments compared to those of non-treatment.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.628-633
• /
• 2011

Studies on lead-free piezoelectrics have been attractive as means of meeting environmental requirements. We synthesized lead-free piezoelectric $(Bi_{1/2}Na_{1/2})TiO_3-Ba(Cu_{1/3}Nb_{2/3})O_3$ (BNT-BCN) ceramics, and their dielectric, piezoelectric, and strain behavior were characterized. As BCN with a tetragonal phase was incorporated into the rhombohedral BNT lattice, the lattice constant increased. A small amount of BCN increased the density and dielectric constant forming the complete solid solution with BNT. However, BCN above 10 mol% was precipitated into a separate phase, and which was detected with XRD. In addition, EDX measurement revealed that Cu in BCN was not distributed homogeneously but was accumulated in a certain area. A lower density with a large amount of BCN was attributed to the nonsinterable property of BCN with large tetragonaliy. The dielectric constant vs the temperature change and the strain vs the electric field indicated that the ferroelectric property of BNT was diminished and paraelectric behavior was enhanced with the BCN addition. BNT-7.5BCN showed a 0.11% unimorph strain with a 9.0 kV/mm electric field with little hysteresis.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.298-303
• /
• 2011

A capsular endoscope (CE) for inspection of the large intestine requires a motor for backward navigation against the autonomous travel in the intestine. This study proposes an HF power system for generating a magnetic field and for delivering wireless power to the internal or implanted medical devices. The magnetic field is generated by a wound coil (L) around a wooden frame, and the current is driven to the coil through a resonating capacitor (C). The characteristics of the resonance frequency shifting of the L-C series circuit are analyzed. A stable magnetic field intensity in the field coil is maintained by a specially designed frequency tracking system that automatically follows the L-C resonance frequency. Testing confirmed that the oscillation system tracks well the parameter changes of the electric components caused by the operating conditions or environmental variations.