• Communications of the Korean Mathematical Society
• /
• v.20 no.2
• /
• pp.381-393
• /
• 2005

We consider a type of large deviation principle obtained by Freidlin and Wentzell for the solution of Stochastic differential equations in a conuclear space. We are using exponential tail estimates and exit probability of a Ito process. The nuclear structure of the state space is also used.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.188-188
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Meta Oxide Semiconductor) based electronic devices, the electronic devices, become much faster and smaller size that are promising property of semiconductor market. However, very narrow interconnect line width has some disadvantages. Deposition of conformal and thin barrier is not easy. And metallization process needs deposition of diffusion barrier and glue layer for EP/ELP deposition. Thus, there is not enough space for copper filling process. In order to get over these negative effects, simple process of copper metallization is important. In this study, Cu-V alloy layer was deposited using of DC/RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane SiO2/Si bi-layer substrate with smooth surface. Cu-V film's thickness was about 50 nm. Cu-V alloy film deposited at $150^{\circ}C$. XRD, AFM, Hall measurement system, and AES were used to analyze this work. For the barrier formation, annealing temperature was 300, 400, $500^{\circ}C$ (1 hour). Barrier thermal stability was tested by I-V(leakage current) and XRD analysis after 300, 500, $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However vanadium-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Therefore thermal stability of vanadium-based diffusion barrier is desirable for copper interconnection.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.293-300
• /
• 2022

During the decommissioning of the nuclear facilities, the radioactive gases in pressure vessels may leak due to the demolition operations. The decommissioning site has large space, slow air circulation, and many large nuclear facilities, which increase the difficulty of workers' inhalation exposure assessment. In order to dynamically evaluate the activity distribution of radionuclides and the committed effective dose from inhalation in nuclear decommissioning environment, an inhalation exposure assessment method based on the modified eddy-diffusion model and the inhaled dose conversion factor is proposed in this paper. The method takes into account the influence of building, facilities, exhaust ducts, etc. on the distribution of radioactive gases, and can evaluate the influence of radioactive gases diffusion on workers during the decommissioning of nuclear facilities.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.58-62
• /
• 2004

The shape evolution of the interface void of copper metallization for intergrated circuits under electromigration stress is modeled. A 2-dimensional finite-difference numerical method is employed for computing time evolution of the void shape driven by surface diffusion, and the electrostatic problem is solved by boundary element method. When the diffusion coefficient is isotropic, the numerical results agree well with the known case of wedge-shape void evolution. The numerical results for the anisotropic diffusion coefficient show that the initially circular void evolves to become a fatal slitlike shape when the electron wind force is large, while the shape becomes non-fatal and circular as the electron wind force decreases. The results indicate that the open circuit failure caused by slit-like void shape is far less probable to be observed for copper metallization under a normal electromigration stress condition.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.64-69
• /
• 2012

Currently axial flow compressor is used primarily in a large power generation gas turbine. In this paper,the main factors to be considered when designing a axial flow compressor were compared to those of a small power generation gas turbine(DGT-5). The main design parameters was examined in the aspect ratio, solidity, as well as reaction, diffusion factor, incidence angle, etc. The results in case of a small compressor are showed a regular pattern but there were not found any specific design patterns for a large class compressor.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.193-212
• /
• 2022

The Bass Diffusion Model is one of the most successful models in marketing research, and management science in general. Since its publication in 1969, it has guided marketing research on diffusion. This paper illustrates the usage of the Bass diffusion model, using mobile cellular subscription diffusion as a context. We fit the bass diffusion model to three large developed markets, South Korea, Japan, and China, and the emerging markets of Vietnam, Thailand, Kazakhstan, and Mongolia. We estimate the parameters of the bass diffusion model using the nonlinear least square method. The diffusion of mobile cellular subscriptions does follow an S-curve in every case. After acquiring m, p, and q parameters we use k-Means Cluster Analysis for grouping countries into three groups. By clustering countries, we suggest that diffusion rates and patterns are similar, where countries with emerging markets can follow in the footsteps of countries with developed markets. The purpose was to predict the timing and the magnitude of the market maturity and to determine whether the data follow the typical diffusion curve of innovations from the Bass model.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.1
• /
• pp.22-29
• /
• 2022

Objective : Despite many advancements in endovascular treatment, the benefits of mechanical thrombectomy (MT) in patients with large infarctions remain uncertain due to hemorrhagic complications. Therefore, we aimed to investigate the efficacy and safety of recanalization via MT within 6 hours after stroke in patients with large cerebral infarction volumes (>70 mL). Methods : We retrospectively reviewed the medical data of 30 patients with large lesions on initial diffusion-weighted imaging (>70 mL) who underwent MT at our institution within 6 hours after stroke onset. Baseline data, recanalization rate, and 3-month clinical outcomes were analyzed. Successful recanalization was defined as a modified treatment in cerebral ischemia score of 2b or 3. Results : The recanalization rate was 63.3%, and symptomatic intracerebral hemorrhage occurred in six patients (20%). The proportion of patients with modified Rankin Scale (mRS) scores of 0-3 was significantly higher in the recanalization group than in the non-recanalization group (47.4% vs. 9.1%, p=0.049). The mortality rate was higher in the non-recanalization group, this difference was not significant (15.8% vs. 36.4%, p=0.372). In the analysis of 3-month clinical outcomes, only successful recanalization was significantly associated with mRS scores of 0-3 (90% vs. 50%, p=0.049). The odds ratio of recanalization for favorable outcomes (mRS 0-3) was 9.00 (95% confidence interval, 0.95-84.90; p=0.055). Conclusion : Despite the risk of symptomatic intracerebral hemorrhage, successful recanalization via MT 6 hours after stroke may improve clinical outcomes in patients with large vessel occlusion.

• Computers and Concrete
• /
• v.8 no.3
• /
• pp.343-355
• /
• 2011

This paper presented the model to predict the chloride diffusion coefficient in tension zone of plain concrete under flexural cyclic load. The fictitious crack based analytical model was used together with the stress degradation law in cracked zone to predict crack growth of plain concrete beams under flexural cyclic load. Then, under cyclic load, the chloride diffusion, in the steady state and one dimensional regime, through the tension zone of the plain concrete beam, in which microcracks were formed by a large number of cycles, was simulated with assumptions of continuously straight crack and uniform-size crack. The numerical analysis in terms of the chloride diffusion coefficient, $D_{tot}$, normalized $D_{tot}$, crack width and crack length was issued as a function of the load cycle, N, and load level, SR. The nonlinear model as regarding with the chloride diffusion coefficient in tension zone and the load level was proposed. According to this model, the chloride diffusion increases with increasing load level. The predictions using model fit well with experimental data when we adopted suitable crack density and tortuosity parameter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.858-863
• /
• 2005

Sensor network is subject to novel problems and constraints because it is composed of thousands of tiny devices with very limited resources. The large number of motes in a sensor network means that there will be some failing nodes owing to the lack of battery in sensor nodes. Therefore, it is imperative to save the energy as much as possible. In this work, we propose energy efficient routing algorithm which is based on directed diffusion scheme. In the proposed scheme, some overloads required for reinforcing the gradient path can be effectively eliminated. Furthermore, in order to verify the usefulness of the proposed algorithm, several simulations are executed.

• Journal of Korean Vacuum Science & Technology
• /
• v.1 no.1
• /
• pp.30-37
• /
• 1997

Interactions of Cu films with Si substrates separated by thin layers of molybdenum and molybdenum nitride were investigated in the viewpoint of diffusion barrier to copper. the diffusion barrier behavior of the layers was studied as functions of deposition and annealing conditions by cross-sectional transmission electron microscopy and Nomarski microscopy. the layers deposited at $N_2$ gas ratios of 0.4 and 0.5 exhibited good diffusion barrier behaviors up to $700^{\circ}C$, mainly due to the phase transformation of molybdenum to $\gamma$-Mo$_2$N phase. The increase in the N gas ratio in deposition elevates the lower limit of barrier failure temperature. Futhermore, amorphous molybdenum nitride films deposited at 20$0^{\circ}C$ and 30$0^{\circ}C$ did not fail, while the crystalline $\gamma$-Mo$_2$N films deposited at 40$0^{\circ}C$ and 50$0^{\circ}C$ showed signs of interlayer interactions between Cu and Si after annealing at 75$0^{\circ}C$ for 30 minutes. Therefore, the amorphous nature of the molybdenum nitride layer enhanced its ability to reduce Cu diffusion and its stability as a diffusion barrier at elevated temperatures.